Cleanup (PPC4xx is AMCC now)

3 files changed, 30 insertions, 30 deletions

diff --git a/board/w7o/fpga.c b/board/w7o/fpga.c
index 97af924..336bfba 100644
--- a/board/w7o/fpga.c
+++ b/board/w7o/fpga.c
@@ -77,17 +77,17 @@ fpgaDownload(unsigned char *saddr,
     dest = (unsigned short *)daddr;
 
     /* Get DCR output register */
-    grego = in32(IBM405GP_GPIO0_OR);
+    grego = in32(PPC405GP_GPIO0_OR);
 
     /* Reset FPGA */
     grego &= ~GPIO_XCV_PROG;			/* PROG line low */
-    out32(IBM405GP_GPIO0_OR, grego);
+    out32(PPC405GP_GPIO0_OR, grego);
 
     /* Setup timeout timer */
     start = get_timer(0);
 
     /* Wait for FPGA init line */
-    while(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
+    while(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
 	/* Check for timeout - 100us max, so use 3ms */
 	if (get_timer(start) > 3) {
 	    printf("     failed to start init.\n");
@@ -100,10 +100,10 @@ fpgaDownload(unsigned char *saddr,
 
     /* Unreset FPGA */
     grego |= GPIO_XCV_PROG;			/* PROG line high */
-    out32(IBM405GP_GPIO0_OR, grego);
+    out32(PPC405GP_GPIO0_OR, grego);
 
     /* Wait for FPGA end of init period .  */
-    while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
+    while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
 
 	/* Check for timeout */
 	if (get_timer(start) > 3) {
@@ -112,7 +112,7 @@ fpgaDownload(unsigned char *saddr,
 
 	    /* Reset FPGA */
 	    grego &= ~GPIO_XCV_PROG;		/* PROG line low */
-	    out32(IBM405GP_GPIO0_OR, grego);
+	    out32(PPC405GP_GPIO0_OR, grego);
 
 	    goto done;
 	}
@@ -127,18 +127,18 @@ fpgaDownload(unsigned char *saddr,
 	mtdcr(CPC0_CR0, greg);			/*  ... just do it */
 
 	/* turn on open drain for CNFG */
-	greg = in32(IBM405GP_GPIO0_ODR);	/* get open drain register */
+	greg = in32(PPC405GP_GPIO0_ODR);	/* get open drain register */
 	greg |= cnfg;				/* CNFG open drain */
-	out32(IBM405GP_GPIO0_ODR, greg);	/*  .. just do it */
+	out32(PPC405GP_GPIO0_ODR, greg);	/*  .. just do it */
 
 	/* Turn output enable on for CNFG */
-	greg = in32(IBM405GP_GPIO0_TCR);	/* get tristate register */
+	greg = in32(PPC405GP_GPIO0_TCR);	/* get tristate register */
 	greg |= cnfg;				/* CNFG tristate inactive */
-	out32(IBM405GP_GPIO0_TCR, greg);	/*  ... just do it */
+	out32(PPC405GP_GPIO0_TCR, greg);	/*  ... just do it */
 
 	/* Setup FPGA for programming */
 	grego &= ~cnfg;				/* CONFIG line low */
-	out32(IBM405GP_GPIO0_OR, grego);
+	out32(PPC405GP_GPIO0_OR, grego);
 
 	/*
 	 * Program the FPGA
@@ -149,12 +149,12 @@ fpgaDownload(unsigned char *saddr,
 
 	/* Done programming */
 	grego |= cnfg;				/* CONFIG line high */
-	out32(IBM405GP_GPIO0_OR, grego);
+	out32(PPC405GP_GPIO0_OR, grego);
 
 	/* Turn output enable OFF for CNFG */
-	greg = in32(IBM405GP_GPIO0_TCR);	/* get tristate register */
+	greg = in32(PPC405GP_GPIO0_TCR);	/* get tristate register */
 	greg &= ~cnfg;				/* CNFG tristate inactive */
-	out32(IBM405GP_GPIO0_TCR, greg);	/*  ... just do it */
+	out32(PPC405GP_GPIO0_TCR, greg);	/*  ... just do it */
 
 	/* Toggle IRQ/GPIO */
 	greg = mfdcr(CPC0_CR0);			/* get chip ctrl register */
@@ -180,7 +180,7 @@ fpgaDownload(unsigned char *saddr,
     start = get_timer(0);
 
     /* Wait for FPGA end of programming period .  */
-    while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
+    while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
 
 	/* Check for timeout */
 	if (get_timer(start) > 3) {
@@ -189,7 +189,7 @@ fpgaDownload(unsigned char *saddr,
 
 	    /* Reset FPGA */
 	    grego &= ~GPIO_XCV_PROG;		/* PROG line low */
-	    out32(IBM405GP_GPIO0_OR, grego);
+	    out32(PPC405GP_GPIO0_OR, grego);
 
 	    goto done;
 	}
diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c
index 1e3ceb2..daf7f53 100644
--- a/board/w7o/w7o.c
+++ b/board/w7o/w7o.c
@@ -47,9 +47,9 @@ int board_early_init_f (void)
 	/*
 	 * Setup GPIO pins - reset devices.
 	 */
-	out32 (IBM405GP_GPIO0_ODR, 0x10000000);	/* one open drain pin */
-	out32 (IBM405GP_GPIO0_OR, 0x3E000000);	/* set output pins to default */
-	out32 (IBM405GP_GPIO0_TCR, 0x7f800000);	/* setup for output */
+	out32 (PPC405GP_GPIO0_ODR, 0x10000000);	/* one open drain pin */
+	out32 (PPC405GP_GPIO0_OR, 0x3E000000);	/* set output pins to default */
+	out32 (PPC405GP_GPIO0_TCR, 0x7f800000);	/* setup for output */
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -78,9 +78,9 @@ int board_early_init_f (void)
 	/*
 	 * Setup GPIO pins
 	 */
-	out32 (IBM405GP_GPIO0_ODR, 0x01800000);	/* XCV Done Open Drain */
-	out32 (IBM405GP_GPIO0_OR, 0x03800000);	/* set out pins to default */
-	out32 (IBM405GP_GPIO0_TCR, 0x66C00000);	/* setup for output */
+	out32 (PPC405GP_GPIO0_ODR, 0x01800000);	/* XCV Done Open Drain */
+	out32 (PPC405GP_GPIO0_OR, 0x03800000);	/* set out pins to default */
+	out32 (PPC405GP_GPIO0_TCR, 0x66C00000);	/* setup for output */
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -238,14 +238,14 @@ int misc_init_r (void)
 #if defined(CONFIG_W7OLMG)
 	unsigned long greg;	/* GPIO Register */
 
-	greg = in32 (IBM405GP_GPIO0_OR);
+	greg = in32 (PPC405GP_GPIO0_OR);
 
 	/*
 	 * XXX - Unreset devices - this should be moved into VxWorks driver code
 	 */
 	greg |= 0x41800000L;	/* SAM, PHY, Galileo */
 
-	out32 (IBM405GP_GPIO0_OR, greg);	/* set output pins to default */
+	out32 (PPC405GP_GPIO0_OR, greg);	/* set output pins to default */
 #endif /* CONFIG_W7OLMG */
 
 	/*
diff --git a/board/w7o/w7o.h b/board/w7o/w7o.h
index 8458166..d6f50e2 100644
--- a/board/w7o/w7o.h
+++ b/board/w7o/w7o.h
@@ -25,13 +25,13 @@
 #define _W7O_H_
 #include <config.h>
 
-/* IBM 405GP PowerPC GPIO registers */
-#define IBM405GP_GPIO0_OR	0xef600700L	/* GPIO Output */
-#define IBM405GP_GPIO0_TCR	0xef600704L	/* GPIO Three-State Control */
-#define IBM405GP_GPIO0_ODR	0xef600718L	/* GPIO Open Drain */
-#define IBM405GP_GPIO0_IR	0xef60071cL	/* GPIO Input */
+/* AMCC 405GP PowerPC GPIO registers */
+#define PPC405GP_GPIO0_OR	0xef600700L	/* GPIO Output */
+#define PPC405GP_GPIO0_TCR	0xef600704L	/* GPIO Three-State Control */
+#define PPC405GP_GPIO0_ODR	0xef600718L	/* GPIO Open Drain */
+#define PPC405GP_GPIO0_IR	0xef60071cL	/* GPIO Input */
 
-/* IBM 405GP DCRs */
+/* AMCC 405GP DCRs */
 #define CPC0_CR0		0xb1		/* Chip control register 0 */
 
 /* LMG FPGA <=> CPU GPIO signals */