Initial revision

1 files changed, 271 insertions, 0 deletions

diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c
new file mode 100644
index 0000000..b404d61
--- /dev/null
+++ b/board/w7o/w7o.c
@@ -0,0 +1,271 @@
+/*
+ * (C) Copyright 2001
+ * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "w7o.h"
+#include <asm/processor.h>
+
+#include "vpd.h"
+#include "errors.h"
+#include <watchdog.h>
+
+unsigned long get_dram_size(void);
+
+/*
+ * Macros to transform values
+ * into environment strings.
+ */
+#define XMK_STR(x)	#x
+#define MK_STR(x)	XMK_STR(x)
+
+/* ------------------------------------------------------------------------- */
+
+int board_pre_init (void)
+{
+#if defined(CONFIG_W7OLMG)
+    /*
+     * Setup GPIO pins - reset devices.
+     */
+    out32(IBM405GP_GPIO0_ODR, 0x10000000);	/* one open drain pin */
+    out32(IBM405GP_GPIO0_OR, 0x3E000000);	/* set output pins to default */
+    out32(IBM405GP_GPIO0_TCR, 0x7f800000);	/* setup for output */
+
+    /*
+     * IRQ 0-15  405GP internally generated; active high; level sensitive
+     * IRQ 16    405GP internally generated; active low; level sensitive
+     * IRQ 17-24 RESERVED
+     * IRQ 25 (EXT IRQ 0) XILINX; active low; level sensitive
+     * IRQ 26 (EXT IRQ 1) PCI INT A; active low; level sensitive
+     * IRQ 27 (EXT IRQ 2) PCI INT B; active low; level sensitive
+     * IRQ 28 (EXT IRQ 3) SAM 2; active low; level sensitive
+     * IRQ 29 (EXT IRQ 4) Battery Bad; active low; level sensitive
+     * IRQ 30 (EXT IRQ 5) Level One PHY; active low; level sensitive
+     * IRQ 31 (EXT IRQ 6) SAM 1; active high; level sensitive
+     */
+    mtdcr(uicsr, 0xFFFFFFFF);			/* clear all ints */
+    mtdcr(uicer, 0x00000000);			/* disable all ints */
+
+    mtdcr(uiccr, 0x00000000);			/* set all to be non-critical*/
+    mtdcr(uicpr, 0xFFFFFF80);			/* set int polarities */
+    mtdcr(uictr, 0x10000000);			/* set int trigger levels */
+    mtdcr(uicvcr, 0x00000001);			/* set vect base=0,
+						   INT0 highest priority*/
+
+    mtdcr(uicsr, 0xFFFFFFFF);			/* clear all ints */
+
+#elif defined(CONFIG_W7OLMC)
+    /*
+     * Setup GPIO pins
+     */
+    out32(IBM405GP_GPIO0_ODR, 0x01800000);	/* XCV Done Open Drain */
+    out32(IBM405GP_GPIO0_OR,  0x03800000);	/* set out pins to default */
+    out32(IBM405GP_GPIO0_TCR, 0x66C00000);	/* setup for output */
+
+    /*
+     * IRQ 0-15  405GP internally generated; active high; level sensitive
+     * IRQ 16    405GP internally generated; active low; level sensitive
+     * IRQ 17-24 RESERVED
+     * IRQ 25 (EXT IRQ 0) DBE 0; active low; level sensitive
+     * IRQ 26 (EXT IRQ 1) DBE 1; active low; level sensitive
+     * IRQ 27 (EXT IRQ 2) DBE 2; active low; level sensitive
+     * IRQ 28 (EXT IRQ 3) DBE Common; active low; level sensitive
+     * IRQ 29 (EXT IRQ 4) PCI; active low; level sensitive
+     * IRQ 30 (EXT IRQ 5) RCMM Reset; active low; level sensitive
+     * IRQ 31 (EXT IRQ 6) PHY; active high; level sensitive
+     */
+    mtdcr(uicsr, 0xFFFFFFFF);			/* clear all ints */
+    mtdcr(uicer, 0x00000000);			/* disable all ints */
+
+    mtdcr(uiccr, 0x00000000);			/* set all to be non-critical*/
+    mtdcr(uicpr, 0xFFFFFF80);			/* set int polarities */
+    mtdcr(uictr, 0x10000000);			/* set int trigger levels */
+    mtdcr(uicvcr, 0x00000001);			/* set vect base=0,
+						   INT0 highest priority*/
+
+    mtdcr(uicsr, 0xFFFFFFFF);			/* clear all ints */
+
+#else /* Unknown */
+#    error "Unknown W7O board configuration"
+#endif
+
+    WATCHDOG_RESET();				/* Reset the watchdog */
+    temp_uart_init();				/* init the uart for debug */
+    WATCHDOG_RESET();				/* Reset the watchdog */
+    test_led();					/* test the LEDs */
+    test_sdram(get_dram_size());		/* test the dram */
+    log_stat(ERR_POST1);			/* log status,post1 complete */
+    return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+int checkboard (void)
+{
+    VPD vpd;
+
+    puts ("Board: ");
+
+    /* VPD data present in I2C EEPROM */
+    if (vpd_get_data(CFG_DEF_EEPROM_ADDR, &vpd) == 0) {
+	/*
+	 * Known board type.
+	 */
+	if (vpd.productId[0] &&
+	    ((strncmp(vpd.productId, "GMM", 3) == 0) ||
+	     (strncmp(vpd.productId, "CMM", 3) == 0))) {
+
+	    /* Output board information on startup */
+	    printf("\"%s\", revision '%c', serial# %ld, manufacturer %u\n",
+		   vpd.productId, vpd.revisionId, vpd.serialNum, vpd.manuID);
+	    return (0);
+	}
+    }
+
+    puts ("### Unknown HW ID - assuming NOTHING\n");
+    return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+    return get_dram_size();
+}
+
+unsigned long get_dram_size (void)
+{
+    int tmp, i, regs[4];
+    int size = 0;
+
+    /* Get bank Size registers */
+    mtdcr(memcfga, mem_mb0cf);			/* get bank 0 config reg */
+    regs[0] = mfdcr(memcfgd);
+
+    mtdcr(memcfga, mem_mb1cf);			/* get bank 1 config reg */
+    regs[1] = mfdcr(memcfgd);
+
+    mtdcr(memcfga, mem_mb2cf);			/* get bank 2 config reg */
+    regs[2] = mfdcr(memcfgd);
+
+    mtdcr(memcfga, mem_mb3cf);			/* get bank 3 config reg */
+    regs[3] = mfdcr(memcfgd);
+
+    /* compute the size, add each bank if enabled */
+    for(i = 0; i < 4; i++) {
+	if (regs[i] & 0x0001) {			/* if enabled, */
+	    tmp = ((regs[i] >> (31 - 14)) & 0x7); /* get size bits */
+	    tmp = 0x400000 << tmp;		/* Size bits X 4MB = size */
+	    size += tmp;
+	}
+    }
+
+    return size;
+}
+
+int misc_init_f (void)
+{
+    return 0;
+}
+
+static void
+w7o_env_init(VPD *vpd)
+{
+    /*
+     * Read VPD
+     */
+    if (vpd_get_data(CFG_DEF_EEPROM_ADDR, vpd) != 0)
+	return;
+
+     /*
+      * Known board type.
+      */
+    if (vpd->productId[0] &&
+	((strncmp(vpd->productId, "GMM", 3) == 0) ||
+	 (strncmp(vpd->productId, "CMM", 3) == 0))) {
+	char buf[30];
+	char *eth;
+	unsigned char *serial = getenv("serial#");
+	unsigned char *ethaddr = getenv("ethaddr");
+
+	/* Set 'serial#' envvar if serial# isn't set */
+	if (!serial) {
+	    sprintf(buf, "%s-%ld", vpd->productId, vpd->serialNum);
+	    setenv("serial#", buf);
+	}
+
+	/* Set 'ethaddr' envvar if 'ethaddr' envvar is the default */
+	eth = vpd->ethAddrs[0];
+	if (ethaddr && (strcmp(ethaddr, MK_STR(CONFIG_ETHADDR)) == 0)) {
+	    /* Now setup ethaddr */
+	    sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x",
+		    eth[0], eth[1], eth[2], eth[3], eth[4], eth[5]);
+	    setenv("ethaddr", buf);
+	}
+    }
+} /* w7o_env_init() */
+
+
+int misc_init_r (void)
+{
+    VPD vpd;					/* VPD information */
+
+#if defined(CONFIG_W7OLMG)
+    unsigned long greg;				/* GPIO Register */
+
+    greg = in32(IBM405GP_GPIO0_OR);
+
+    /*
+     * XXX - Unreset devices - this should be moved into VxWorks driver code
+     */
+    greg |= 0x41800000L;			/* SAM, PHY, Galileo */
+
+    out32(IBM405GP_GPIO0_OR, greg);		/* set output pins to default */
+#endif /* CONFIG_W7OLMG */
+
+    /*
+     * Initialize W7O environment variables
+     */
+    w7o_env_init(&vpd);
+
+    /*
+     * Initialize the FPGA(s).
+     */
+    if (init_fpga() == 0)
+	test_fpga((unsigned short *)CONFIG_FPGAS_BASE);
+
+    /* More POST testing. */
+    post2();
+
+    /* Done with hardware initialization and POST. */
+    log_stat(ERR_POSTOK);
+
+    /* Call silly, fail safe boot init routine */
+    init_fsboot();
+
+	return (0);
+}
+