hmi1001, mucmc52, uc100, uc101: move boards to vendor directory

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Roderik Wildenburg <roderik.wildenburg@manroland.com>

3 files changed, 0 insertions, 473 deletions

diff --git a/board/uc101/Makefile b/board/uc101/Makefile
deleted file mode 100644
index 442e2d0..0000000
--- a/board/uc101/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/uc101/config.mk b/board/uc101/config.mk
deleted file mode 100644
index 8ccf33e..0000000
--- a/board/uc101/config.mk
+++ /dev/null
@@ -1,42 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# INKA 4X0 board:
-#
-#	Valid values for TEXT_BASE are:
-#
-#	0xFFE00000   boot high
-#
-#	0x00100000   boot from RAM (for testing only)
-#
-
-ifndef TEXT_BASE
-## Standard: boot high
-TEXT_BASE = 0xFFF00000
-## For testing: boot from RAM
-#TEXT_BASE = 0x00100000
-endif
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c
deleted file mode 100644
index c7dfb7b..0000000
--- a/board/uc101/uc101.c
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * (C) Copyright 2006
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <malloc.h>
-
-/* some SIMPLE GPIO Pins */
-#define GPIO_USB_8	(31-12)
-#define GPIO_USB_7	(31-13)
-#define GPIO_USB_6	(31-14)
-#define GPIO_USB_0	(31-15)
-#define GPIO_PSC3_7	(31-18)
-#define GPIO_PSC3_6	(31-19)
-#define GPIO_PSC3_1	(31-22)
-#define GPIO_PSC3_0	(31-23)
-
-/* some simple Interrupt GPIO Pins */
-#define GPIO_PSC3_8	2
-#define GPIO_USB1_9	3
-
-#define GPT_OUT_0	0x00000027
-#define GPT_OUT_1	0x00000037
-#define	GPT_DISABLE	0x00000000	/* GPT pin disabled */
-
-#define GP_SIMP_ENABLE_O(n, v) {pgpio->simple_dvo |= (v << n); \
-				pgpio->simple_ddr |= (1 << n); \
-				pgpio->simple_gpioe |= (1 << n); \
-				}
-
-#define GP_SIMP_ENABLE_I(n) {	pgpio->simple_ddr |= ~(1 << n); \
-				pgpio->simple_gpioe |= (1 << n); \
-				}
-
-#define GP_SIMP_SET_O(n, v)  (pgpio->simple_dvo = v ? \
-				(pgpio->simple_dvo | (1 << n)) : \
-				(pgpio->simple_dvo & ~(1 << n)) )
-
-#define GP_SIMP_GET_O(n)  ((pgpio->simple_dvo >> n) & 1)
-#define GP_SIMP_GET_I(n)  ((pgpio->simple_ival >> n) & 1)
-
-#define GP_SINT_SET_O(n, v)  (pgpio->sint_dvo = v ? \
-				(pgpio->sint_dvo | (1 << n)) : \
-				(pgpio->sint_dvo & ~(1 << n)) )
-
-#define GP_SINT_ENABLE_O(n, v) {pgpio->sint_ode &= ~(1 << n); \
-				pgpio->sint_ddr |= (1 << n); \
-				GP_SINT_SET_O(n, v); \
-				pgpio->sint_gpioe |= (1 << n); \
-				}
-
-#define GP_SINT_ENABLE_I(n) {	pgpio->sint_ddr |= ~(1 << n); \
-				pgpio->sint_gpioe |= (1 << n); \
-				}
-
-#define GP_SINT_GET_O(n)  ((pgpio->sint_ival >> n) & 1)
-#define GP_SINT_GET_I(n)  ((pgpio-ntt_ival >> n) & 1)
-
-#define GP_TIMER_ENABLE_O(n, v) ( \
-	((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr = v ? \
-				GPT_OUT_1 : \
-				GPT_OUT_0 )
-
-#define GP_TIMER_SET_O(n, v)	GP_TIMER_ENABLE_O(n, v)
-
-#define GP_TIMER_GET_O(n, v) ( \
-	(((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr & 0x10) >> 4)
-
-#define GP_TIMER_GET_I(n, v) ( \
-	(((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->sr & 0x100) >> 8)
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- *	      is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
-	ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
-			__builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#else /* CONFIG_SYS_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-/*	return dramsize + dramsize2; */
-	return dramsize;
-}
-
-int checkboard (void)
-{
-	puts ("Board: MAN UC101\n");
-	/* clear the Display */
-	*(char *)(CONFIG_SYS_DISP_CWORD) = 0x80;
-	return 0;
-}
-
-static void init_ports (void)
-{
-	volatile struct mpc5xxx_gpio *pgpio =
-		(struct mpc5xxx_gpio *)MPC5XXX_GPIO;
-
-	GP_SIMP_ENABLE_I(GPIO_USB_8);	/* HEX Bit 3 */
-	GP_SIMP_ENABLE_I(GPIO_USB_7);	/* HEX Bit 2 */
-	GP_SIMP_ENABLE_I(GPIO_USB_6);	/* HEX Bit 1 */
-	GP_SIMP_ENABLE_I(GPIO_USB_0);	/* HEX Bit 0 */
-	GP_SIMP_ENABLE_I(GPIO_PSC3_0);	/* Switch Menue A */
-	GP_SIMP_ENABLE_I(GPIO_PSC3_1);	/* Switch Menue B */
-	GP_SIMP_ENABLE_I(GPIO_PSC3_6);	/* Switch Cold_Warm */
-	GP_SIMP_ENABLE_I(GPIO_PSC3_7);	/* Switch Restart */
-	GP_SINT_ENABLE_O(GPIO_PSC3_8, 0);	/* LED H2 */
-	GP_SINT_ENABLE_O(GPIO_USB1_9, 0);	/* LED H3 */
-	GP_TIMER_ENABLE_O(4, 0);	/* LED H4 */
-	GP_TIMER_ENABLE_O(5, 0);	/* LED H5 */
-	GP_TIMER_ENABLE_O(3, 0);	/* LED HB */
-	GP_TIMER_ENABLE_O(1, 0);	/* RES_COLDSTART */
-}
-
-#ifdef CONFIG_PREBOOT
-
-static uchar kbd_magic_prefix[]		= "key_magic";
-static uchar kbd_command_prefix[]	= "key_cmd";
-
-struct kbd_data_t {
-	char s1;
-};
-
-struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
-{
-	volatile struct mpc5xxx_gpio *pgpio =
-		(struct mpc5xxx_gpio *)MPC5XXX_GPIO;
-
-	kbd_data->s1 = GP_SIMP_GET_I(GPIO_USB_8) << 3 | \
-			GP_SIMP_GET_I(GPIO_USB_7) << 2 | \
-			GP_SIMP_GET_I(GPIO_USB_6) << 1 | \
-			GP_SIMP_GET_I(GPIO_USB_0) << 0;
-	return kbd_data;
-}
-
-static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
-{
-	char s1 = str[0];
-
-	if (s1 >= '0' && s1 <= '9')
-		s1 -= '0';
-	else if (s1 >= 'a' && s1 <= 'f')
-		s1 = s1 - 'a' + 10;
-	else if (s1 >= 'A' && s1 <= 'F')
-		s1 = s1 - 'A' + 10;
-	else
-		return -1;
-
-	if (s1 != kbd_data->s1) return -1;
-	return 0;
-}
-
-static char *key_match (const struct kbd_data_t *kbd_data)
-{
-	char magic[sizeof (kbd_magic_prefix) + 1];
-	char *suffix;
-	char *kbd_magic_keys;
-
-	/*
-	 * The following string defines the characters that can be appended
-	 * to "key_magic" to form the names of environment variables that
-	 * hold "magic" key codes, i. e. such key codes that can cause
-	 * pre-boot actions. If the string is empty (""), then only
-	 * "key_magic" is checked (old behaviour); the string "125" causes
-	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
-	 */
-	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
-		kbd_magic_keys = "";
-
-	/* loop over all magic keys;
-	 * use '\0' suffix in case of empty string
-	 */
-	for (suffix = kbd_magic_keys; *suffix ||
-		     suffix == kbd_magic_keys; ++suffix) {
-		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
-
-		if (compare_magic(kbd_data, getenv(magic)) == 0) {
-			char cmd_name[sizeof (kbd_command_prefix) + 1];
-			char *cmd;
-
-			sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
-			cmd = getenv (cmd_name);
-
-			return (cmd);
-		}
-	}
-
-	return (NULL);
-}
-
-#endif /* CONFIG_PREBOOT */
-
-int misc_init_r (void)
-{
-	/* Init the I/O ports */
-	init_ports ();
-
-#ifdef CONFIG_PREBOOT
-	struct kbd_data_t kbd_data;
-	/* Decode keys */
-	char *str = strdup (key_match (get_keys (&kbd_data)));
-	/* Set or delete definition */
-	setenv ("preboot", str);
-	free (str);
-#endif /* CONFIG_PREBOOT */
-	return 0;
-}
-
-int board_early_init_r (void)
-{
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
-	*(vu_long *)MPC5XXX_BOOTCS_START =
-	*(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE);
-	*(vu_long *)MPC5XXX_BOOTCS_STOP =
-	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE);
-	/* Interbus enable it here ?? */
-	*(vu_long *)MPC5XXX_GPT6_ENABLE = GPT_OUT_1;
-	return 0;
-}
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_HW_WATCHDOG)
-void hw_watchdog_reset(void)
-{
-	/* Trigger HW Watchdog with TIMER_0 */
-	*(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_1;
-	*(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_0;
-}
-#endif
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */