TQM: move TQM boards to board/tqc

Move all TQM board directories to the vendor specific directory "tqc"
for modules from TQ-Components GmbH (http://www.tqc.de).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

1 files changed, 0 insertions, 223 deletions

diff --git a/board/tqm85xx/sdram.c b/board/tqm85xx/sdram.c
deleted file mode 100644
index 788a48c..0000000
--- a/board/tqm85xx/sdram.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-
-struct sdram_conf_s {
-	unsigned long size;
-	unsigned long reg;
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
-sdram_conf_t ddr_cs_conf[] = {
-	{(512 << 20), 0x80000202},	/* 512MB, 14x10(4)	*/
-	{(256 << 20), 0x80000102},	/* 256MB, 13x10(4)	*/
-	{(128 << 20), 0x80000101},	/* 128MB, 13x9(4)	*/
-	{(64  << 20), 0x80000001},	/* 64MB,  12x9(4)	*/
-};
-
-#define	N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
-
-int cas_latency(void);
-
-/*
- * Autodetect onboard DDR SDRAM on 85xx platforms
- *
- * NOTE: Some of the hardcoded values are hardware dependant,
- *       so this should be extended for other future boards
- *       using this routine!
- */
-long int sdram_setup(int casl)
-{
-	int i;
-	volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
-	unsigned long cfg_ddr_timing1;
-	unsigned long cfg_ddr_mode;
-
-	/*
-	 * Disable memory controller.
-	 */
-	ddr->cs0_config = 0;
-	ddr->sdram_cfg = 0;
-
-	switch (casl) {
-	case 20:
-		cfg_ddr_timing1 = 0x47405331 | (3 << 16);
-		cfg_ddr_mode = 0x40020002 | (2 << 4);
-		break;
-
-	case 25:
-		cfg_ddr_timing1 = 0x47405331 | (4 << 16);
-		cfg_ddr_mode = 0x40020002 | (6 << 4);
-		break;
-
-	case 30:
-	default:
-		cfg_ddr_timing1 = 0x47405331 | (5 << 16);
-		cfg_ddr_mode = 0x40020002 | (3 << 4);
-		break;
-	}
-
-	ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
-	ddr->cs0_config = ddr_cs_conf[0].reg;
-	ddr->timing_cfg_1 = cfg_ddr_timing1;
-	ddr->timing_cfg_2 = 0x00000800;		/* P9-45,may need tuning */
-	ddr->sdram_mode = cfg_ddr_mode;
-	ddr->sdram_interval = 0x05160100;	/* autocharge,no open page */
-	ddr->err_disable = 0x0000000D;
-
-	asm ("sync;isync;msync");
-	udelay(1000);
-
-	ddr->sdram_cfg = 0xc2000000;		/* unbuffered,no DYN_PWR */
-	asm ("sync; isync; msync");
-	udelay(1000);
-
-	for (i=0; i<N_DDR_CS_CONF; i++) {
-		ddr->cs0_config = ddr_cs_conf[i].reg;
-
-		if (get_ram_size(0, ddr_cs_conf[i].size) == ddr_cs_conf[i].size) {
-			/*
-			 * OK, size detected -> all done
-			 */
-			return ddr_cs_conf[i].size;
-		}
-	}
-
-	return 0;				/* nothing found !		*/
-}
-
-void board_add_ram_info(int use_default)
-{
-	int casl;
-
-	if (use_default)
-		casl = CONFIG_DDR_DEFAULT_CL;
-	else
-		casl = cas_latency();
-
-	puts(" (CL=");
-	switch (casl) {
-	case 20:
-		puts("2)");
-		break;
-
-	case 25:
-		puts("2.5)");
-		break;
-
-	case 30:
-		puts("3)");
-		break;
-	}
-}
-
-long int initdram (int board_type)
-{
-	long dram_size = 0;
-	int casl;
-
-#if defined(CONFIG_DDR_DLL)
-	/*
-	 * This DLL-Override only used on TQM8540 and TQM8560
-	 */
-	{
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-		int i,x;
-
-		x = 10;
-
-		/*
-		 * Work around to stabilize DDR DLL
-		 */
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay (200);
-		while (gur->ddrdllcr != 0x81000100) {
-			gur->devdisr = gur->devdisr | 0x00010000;
-			asm("sync;isync;msync");
-			for (i=0; i<x; i++)
-				;
-			gur->devdisr = gur->devdisr & 0xfff7ffff;
-			asm("sync;isync;msync");
-			x++;
-		}
-	}
-#endif
-
-	casl = cas_latency();
-	dram_size = sdram_setup(casl);
-	if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
-		/*
-		 * Try again with default CAS latency
-		 */
-		puts("Problem with CAS lantency");
-		board_add_ram_info(1);
-		puts(", using default CL!\n");
-		casl = CONFIG_DDR_DEFAULT_CL;
-		dram_size = sdram_setup(casl);
-		puts("       ");
-	}
-
-	return dram_size;
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf ("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf ("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf ("SDRAM test passed.\n");
-	return 0;
-}
-#endif