Merge with /home/sr/git/u-boot

1 files changed, 0 insertions, 284 deletions

diff --git a/board/tqm8540/tqm8540.c b/board/tqm8540/tqm8540.c
deleted file mode 100644
index 970c684..0000000
--- a/board/tqm8540/tqm8540.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Copyright 2005 DENX Software Engineering
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <spd.h>
-
-#if defined(CONFIG_DDR_ECC)
-extern void ddr_enable_ecc (unsigned int dram_size);
-#endif
-
-extern long int spd_sdram (void);
-
-void local_bus_init (void);
-long int fixed_sdram (void);
-
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("Board: TQM8540\n");
-
-#ifdef CONFIG_PCI
-	printf ("PCI1:  32 bit, %d MHz (compiled)\n",
-		CONFIG_SYS_CLK_FREQ / 1000000);
-#else
-	printf ("PCI1:  disabled\n");
-#endif
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	return 0;
-}
-
-
-long int initdram (int board_type)
-{
-	long dram_size = 0;
-	extern long spd_sdram (void);
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		volatile ccsr_gur_t *gur= &immap->im_gur;
-		int i,x;
-
-		x = 10;
-
-		/*
-		 * Work around to stabilize DDR DLL
-		 */
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay (200);
-		while (gur->ddrdllcr != 0x81000100) {
-			gur->devdisr = gur->devdisr | 0x00010000;
-			asm("sync;isync;msync");
-			for (i=0; i<x; i++)
-				;
-			gur->devdisr = gur->devdisr & 0xfff7ffff;
-			asm("sync;isync;msync");
-			x++;
-		}
-	}
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram ();
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-#if defined(CONFIG_DDR_ECC)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc (dram_size);
-#endif
-
-	return dram_size;
-}
-
-
-/*
- * Initialize Local Bus
- */
-
-void local_bus_init (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info (&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
-		lbc->ltedr = 0xa4c80000;	/* DK: !!! */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);	/* DLL Enabled */
-
-	} else {
-		/*
-		 * On REV1 boards, need to change CLKDIV before enable DLL.
-		 * Default CLKDIV is 8, change it to 4 temporarily.
-		 */
-		uint pvr = get_pvr ();
-		uint temp_lbcdll = 0;
-
-		if (pvr == PVR_85xx_REV1) {
-			/* FIXME: Justify the high bit here. */
-			lbc->lcrr = 0x10000004;
-		}
-
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);	/* DLL Enabled */
-		udelay (200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm ("sync;isync;msync");
-	}
-}
-
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf ("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf ("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf ("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-long int fixed_sdram (void)
-{
-#ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ccsr_ddr_t *ddr = &immap->im_ddr;
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->err_disable = 0x0000000D;
-#if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000000D;
-	ddr->err_sbe = 0x00ff0000;
-#endif
-	asm ("sync;isync;msync");
-	udelay (500);
-#if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
-#else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
-#endif
-	asm ("sync; isync; msync");
-	udelay (500);
-#endif
-	return get_ram_size (0, CFG_SDRAM_SIZE * 1024 * 1024);
-}
-#endif /* !defined(CONFIG_SPD_EEPROM) */
-
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc85xxads_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
-	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY |
-				     PCI_COMMAND_MASTER}},
-	{}
-};
-#endif
-
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table:pci_mpc85xxads_config_table,
-#endif
-};
-
-#endif /* CONFIG_PCI */
-
-
-void pci_init_board (void)
-{
-#ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init (struct pci_controller *hose);
-
-	pci_mpc85xx_init (&hose);
-#endif /* CONFIG_PCI */
-}