ppc: Zap TQM8260 board

This board is old and is using CONFIG_I2C_X, which is wrong.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>

5 files changed, 0 insertions, 803 deletions

diff --git a/board/tqc/tqm8260/Kconfig b/board/tqc/tqm8260/Kconfig
deleted file mode 100644
index 90a96eb..0000000
--- a/board/tqc/tqm8260/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_TQM8260
-
-config SYS_BOARD
-	default "tqm8260"
-
-config SYS_VENDOR
-	default "tqc"
-
-config SYS_CONFIG_NAME
-	default "TQM8260"
-
-endif
diff --git a/board/tqc/tqm8260/MAINTAINERS b/board/tqc/tqm8260/MAINTAINERS
deleted file mode 100644
index 266910f..0000000
--- a/board/tqc/tqm8260/MAINTAINERS
+++ /dev/null
@@ -1,16 +0,0 @@
-TQM8260 BOARD
-M:	Wolfgang Denk <wd@denx.de>
-S:	Maintained
-F:	board/tqc/tqm8260/
-F:	include/configs/TQM8260.h
-F:	configs/TQM8255_AA_defconfig
-F:	configs/TQM8260_AA_defconfig
-F:	configs/TQM8260_AB_defconfig
-F:	configs/TQM8260_AC_defconfig
-F:	configs/TQM8260_AD_defconfig
-F:	configs/TQM8260_AE_defconfig
-F:	configs/TQM8260_AF_defconfig
-F:	configs/TQM8260_AG_defconfig
-F:	configs/TQM8260_AH_defconfig
-F:	configs/TQM8260_AI_defconfig
-F:	configs/TQM8265_AA_defconfig
diff --git a/board/tqc/tqm8260/Makefile b/board/tqc/tqm8260/Makefile
deleted file mode 100644
index 6b8573d..0000000
--- a/board/tqc/tqm8260/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= tqm8260.o ../tqm8xx/load_sernum_ethaddr.o
diff --git a/board/tqc/tqm8260/README b/board/tqc/tqm8260/README
deleted file mode 100644
index 93b5506..0000000
--- a/board/tqc/tqm8260/README
+++ /dev/null
@@ -1,415 +0,0 @@
-
-This file contains basic information on the port of U-Boot to TQM8260.
-All the changes fit in the common U-Boot infrastructure, providing a
-new TQM8260-specific entry in makefiles. To build U-Boot for TQM8260,
-type "make TQM8260_config", edit the "include/config_TQM8260.h" file
-if necessary, then type "make".
-
-
-Common file modifications:
---------------------------
-
-The following common files have been modified by this project:
-(starting from the ppcboot-0.9.3/ directory)
-
-MAKEALL			- TQM8260 entry added
-Makefile		- TQM8260_config entry added
-arch/powerpc/cpu/mpc8260/Makefile	- soft_i2c.o module added
-arch/powerpc/cpu/mpc8260/ether_scc.c	- TQM8260-specific definitions added, an obvious
-			  bug fixed (fcr -> scr)
-arch/powerpc/cpu/mpc8260/ether_fcc.c	- TQM8260-specific definitions added
-include/flash.h		- added definitions for the AM29LV640D Flash chip
-
-
-New files:
-----------
-
-The following new files have been added by this project:
-(starting from the ppcboot-0.9.3/ directory)
-
-board/tqm8260/		  - board-specific directory
-board/tqm8260/Makefile	  - board-specific makefile
-board/tqm8260/config.mk	  - config file
-board/tqm8260/flash.c	  - flash driver (for AM29LV640D)
-board/tqm8260/ppcboot.lds - linker script
-board/tqm8260/tqm8260.c	  - ioport and memory initialization
-arch/powerpc/cpu/mpc8260/soft_i2c.c	  - software i2c EEPROM driver
-include/config_TQM8260.h  - main configuration file
-
-
-New configuration options:
---------------------------
-
-CONFIG_TQM8260
-
-	Main board-specific option (should be defined for TQM8260).
-
-CONFIG_82xx_CONS_SMC1
-
-	If defined, SMC1 will be used as the console
-
-CONFIG_82xx_CONS_SMC2
-
-	If defined, SMC2 will be used as the console
-
-CONFIG_SYS_INIT_LOCAL_SDRAM
-
-	If defined, the SDRAM on the local bus will be initialized and
-	mapped at BR2.
-
-
-Acceptance criteria tests:
---------------------------
-
-The following tests have been conducted to validate the port of U-Boot
-to TQM8260:
-
-1. Operation on serial console:
-
-With the CONFIG_82xx_CONS_SMC1 option defined in the main configuration file,
-the U-Boot output appeared on the serial terminal connected to COM1 as
-follows:
-
-------------------------------------------------------------------------------
-=> help
-go      - start application at address 'addr'
-run     - run commands in an environment variable
-bootm   - boot application image from memory
-bootp   - boot image via network using BootP/TFTP protocol
-tftpboot- boot image via network using TFTP protocol
-	       and env variables ipaddr and serverip
-rarpboot- boot image via network using RARP/TFTP protocol
-bootd   - boot default, i.e., run 'bootcmd'
-loads   - load S-Record file over serial line
-loadb   - load binary file over serial line (kermit mode)
-md      - memory display
-mm      - memory modify (auto-incrementing)
-nm      - memory modify (constant address)
-mw      - memory write (fill)
-cp      - memory copy
-cmp     - memory compare
-crc32   - checksum calculation
-base    - print or set address offset
-printenv- print environment variables
-setenv  - set environment variables
-saveenv - save environment variables to persistent storage
-protect - enable or disable FLASH write protection
-erase   - erase FLASH memory
-flinfo  - print FLASH memory information
-bdinfo  - print Board Info structure
-iminfo  - print header information for application image
-coninfo - print console devices and informations
-eeprom  - EEPROM sub-system
-loop    - infinite loop on address range
-mtest   - simple RAM test
-icache  - enable or disable instruction cache
-dcache  - enable or disable data cache
-reset   - Perform RESET of the CPU
-echo    - echo args to console
-version - print monitor version
-help    - print online help
-?       - alias for 'help'
-=>
-------------------------------------------------------------------------------
-
-
-2. Flash driver operation
-
-The following sequence was performed to test the "flinfo" command:
-
-------------------------------------------------------------------------------
-=> flinfo
-
-Bank # 1: AMD 29LV640D (64 M, uniform sector)
-  Size: 32 MB in 128 Sectors
-  Sector Start Addresses:
-    40000000      40040000 (RO) 40080000      400C0000      40100000
-    40140000      40180000      401C0000      40200000      40240000
-    40280000      402C0000      40300000      40340000      40380000
-    403C0000      40400000      40440000      40480000      404C0000
-    40500000      40540000      40580000      405C0000      40600000
-    40640000      40680000      406C0000      40700000      40740000
-    40780000      407C0000      40800000      40840000      40880000
-    408C0000      40900000      40940000      40980000      409C0000
-    40A00000      40A40000      40A80000      40AC0000      40B00000
-    40B40000      40B80000      40BC0000      40C00000      40C40000
-    40C80000      40CC0000      40D00000      40D40000      40D80000
-    40DC0000      40E00000      40E40000      40E80000      40EC0000
-    40F00000      40F40000      40F80000      40FC0000      41000000
-    41040000      41080000      410C0000      41100000      41140000
-    41180000      411C0000      41200000      41240000      41280000
-    412C0000      41300000      41340000      41380000      413C0000
-    41400000      41440000      41480000      414C0000      41500000
-    41540000      41580000      415C0000      41600000      41640000
-    41680000      416C0000      41700000      41740000      41780000
-    417C0000      41800000      41840000      41880000      418C0000
-    41900000      41940000      41980000      419C0000      41A00000
-    41A40000      41A80000      41AC0000      41B00000      41B40000
-    41B80000      41BC0000      41C00000      41C40000      41C80000
-    41CC0000      41D00000      41D40000      41D80000      41DC0000
-    41E00000      41E40000      41E80000      41EC0000      41F00000
-    41F40000      41F80000      41FC0000
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test the erase command:
-
-------------------------------------------------------------------------------
-=> cp 0 40080000 10
-Copy to Flash... done
-=> erase 40080000 400bffff
-Erase Flash from 0x40080000 to 0x400bffff
-.. done
-Erased 1 sectors
-=> md 40080000
-40080000: ffffffff ffffffff ffffffff ffffffff    ................
-40080010: ffffffff ffffffff ffffffff ffffffff    ................
-40080020: ffffffff ffffffff ffffffff ffffffff    ................
-40080030: ffffffff ffffffff ffffffff ffffffff    ................
-40080040: ffffffff ffffffff ffffffff ffffffff    ................
-40080050: ffffffff ffffffff ffffffff ffffffff    ................
-40080060: ffffffff ffffffff ffffffff ffffffff    ................
-40080070: ffffffff ffffffff ffffffff ffffffff    ................
-40080080: ffffffff ffffffff ffffffff ffffffff    ................
-40080090: ffffffff ffffffff ffffffff ffffffff    ................
-400800a0: ffffffff ffffffff ffffffff ffffffff    ................
-400800b0: ffffffff ffffffff ffffffff ffffffff    ................
-400800c0: ffffffff ffffffff ffffffff ffffffff    ................
-400800d0: ffffffff ffffffff ffffffff ffffffff    ................
-400800e0: ffffffff ffffffff ffffffff ffffffff    ................
-400800f0: ffffffff ffffffff ffffffff ffffffff    ................
-=> cp 0 40080000 10
-Copy to Flash... done
-=> erase 1:2
-Erase Flash Sectors 2-2 in Bank # 1
-.. done
-=> md 40080000
-40080000: ffffffff ffffffff ffffffff ffffffff    ................
-40080010: ffffffff ffffffff ffffffff ffffffff    ................
-40080020: ffffffff ffffffff ffffffff ffffffff    ................
-40080030: ffffffff ffffffff ffffffff ffffffff    ................
-40080040: ffffffff ffffffff ffffffff ffffffff    ................
-40080050: ffffffff ffffffff ffffffff ffffffff    ................
-40080060: ffffffff ffffffff ffffffff ffffffff    ................
-40080070: ffffffff ffffffff ffffffff ffffffff    ................
-40080080: ffffffff ffffffff ffffffff ffffffff    ................
-40080090: ffffffff ffffffff ffffffff ffffffff    ................
-400800a0: ffffffff ffffffff ffffffff ffffffff    ................
-400800b0: ffffffff ffffffff ffffffff ffffffff    ................
-400800c0: ffffffff ffffffff ffffffff ffffffff    ................
-400800d0: ffffffff ffffffff ffffffff ffffffff    ................
-400800e0: ffffffff ffffffff ffffffff ffffffff    ................
-400800f0: ffffffff ffffffff ffffffff ffffffff    ................
-=> cp 0 40080000 10
-Copy to Flash... done
-=> cp 0 400c0000 10
-Copy to Flash... done
-=> erase 1:2-3
-Erase Flash Sectors 2-3 in Bank # 1
-... done
-=> md 40080000
-40080000: ffffffff ffffffff ffffffff ffffffff    ................
-40080010: ffffffff ffffffff ffffffff ffffffff    ................
-40080020: ffffffff ffffffff ffffffff ffffffff    ................
-40080030: ffffffff ffffffff ffffffff ffffffff    ................
-40080040: ffffffff ffffffff ffffffff ffffffff    ................
-40080050: ffffffff ffffffff ffffffff ffffffff    ................
-40080060: ffffffff ffffffff ffffffff ffffffff    ................
-40080070: ffffffff ffffffff ffffffff ffffffff    ................
-40080080: ffffffff ffffffff ffffffff ffffffff    ................
-40080090: ffffffff ffffffff ffffffff ffffffff    ................
-400800a0: ffffffff ffffffff ffffffff ffffffff    ................
-400800b0: ffffffff ffffffff ffffffff ffffffff    ................
-400800c0: ffffffff ffffffff ffffffff ffffffff    ................
-400800d0: ffffffff ffffffff ffffffff ffffffff    ................
-400800e0: ffffffff ffffffff ffffffff ffffffff    ................
-400800f0: ffffffff ffffffff ffffffff ffffffff    ................
-=> md 400c0000
-400c0000: ffffffff ffffffff ffffffff ffffffff    ................
-400c0010: ffffffff ffffffff ffffffff ffffffff    ................
-400c0020: ffffffff ffffffff ffffffff ffffffff    ................
-400c0030: ffffffff ffffffff ffffffff ffffffff    ................
-400c0040: ffffffff ffffffff ffffffff ffffffff    ................
-400c0050: ffffffff ffffffff ffffffff ffffffff    ................
-400c0060: ffffffff ffffffff ffffffff ffffffff    ................
-400c0070: ffffffff ffffffff ffffffff ffffffff    ................
-400c0080: ffffffff ffffffff ffffffff ffffffff    ................
-400c0090: ffffffff ffffffff ffffffff ffffffff    ................
-400c00a0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00b0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00c0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00d0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00e0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00f0: ffffffff ffffffff ffffffff ffffffff    ................
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test the Flash programming commands:
-
-------------------------------------------------------------------------------
-=> erase 40080000 400bffff
-Erase Flash from 0x40080000 to 0x400bffff
-.. done
-Erased 1 sectors
-=> cp 0 40080000 10
-Copy to Flash... done
-=> md 0
-00000000: 00000000 00000104 61100200 01000000    ........a.......
-00000010: 00000000 00000000 81140000 82000100    ................
-00000020: 01080000 00004000 22800000 00000600    ......@.".......
-00000030: 00200800 00000000 10000100 00008000    . ..............
-00000040: 00812000 00000200 00020000 80000000    .. .............
-00000050: 00028001 00001000 00040400 00000200    ................
-00000060: 20480000 00000000 20090000 00142000     H...... ..... .
-00000070: 00000000 00004000 24210000 10000000    ......@.$!......
-00000080: 02440002 10000000 00200008 00000000    .D....... ......
-00000090: 02440900 00000000 30a40000 00004400    .D......0.....D.
-000000a0: 04420800 00000000 00000040 00020000    .B.........@....
-000000b0: 05020000 00100000 00060000 00000000    ................
-000000c0: 00400000 00000000 00080000 00040000    .@..............
-000000d0: 10400000 00800004 00000000 00000200    .@..............
-000000e0: 80890000 00010004 00080000 00000020    ...............
-000000f0: 08000000 10000000 00010000 00000000    ................
-=> md 40080000
-40080000: 00000000 00000104 61100200 01000000    ........a.......
-40080010: 00000000 00000000 81140000 82000100    ................
-40080020: 01080000 00004000 22800000 00000600    ......@.".......
-40080030: 00200800 00000000 10000100 00008000    . ..............
-40080040: ffffffff ffffffff ffffffff ffffffff    ................
-40080050: ffffffff ffffffff ffffffff ffffffff    ................
-40080060: ffffffff ffffffff ffffffff ffffffff    ................
-40080070: ffffffff ffffffff ffffffff ffffffff    ................
-40080080: ffffffff ffffffff ffffffff ffffffff    ................
-40080090: ffffffff ffffffff ffffffff ffffffff    ................
-400800a0: ffffffff ffffffff ffffffff ffffffff    ................
-400800b0: ffffffff ffffffff ffffffff ffffffff    ................
-400800c0: ffffffff ffffffff ffffffff ffffffff    ................
-400800d0: ffffffff ffffffff ffffffff ffffffff    ................
-400800e0: ffffffff ffffffff ffffffff ffffffff    ................
-400800f0: ffffffff ffffffff ffffffff ffffffff    ................
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test storage of the environment
-variables in Flash:
-
-------------------------------------------------------------------------------
-=> setenv foo bar
-=> saveenv
-Un-Protected 1 sectors
-Erasing Flash...
-.. done
-Erased 1 sectors
-Saving Environment to Flash...
-Protected 1 sectors
-=> reset
-...
-=> printenv
-bootdelay=CONFIG_BOOTDELAY
-baudrate=9600
-ipaddr=192.168.4.7
-serverip=192.168.4.1
-ethaddr=66:55:44:33:22:11
-foo=bar
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 170/262140 bytes
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test image download and run over
-Ethernet interface (both interfaces were tested):
-
-------------------------------------------------------------------------------
-=> tftpboot 40000 hello_world.bin
-ARP broadcast 1
-TFTP from server 192.168.2.2; our IP address is 192.168.2.7
-Filename 'hello_world.bin'.
-Load address: 0x40000
-Loading: #############
-done
-Bytes transferred = 65912 (10178 hex)
-=> go 40004
-## Starting application at 0x00040004 ...
-Hello World
-argc = 1
-argv[0] = "40004"
-argv[1] = "<NULL>"
-Hit any key to exit ...
-
-## Application terminated, rc = 0x0
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test eeprom read/write commands:
-
-------------------------------------------------------------------------------
-=> md 40000
-00040000: 00018148 9421ffe0 7c0802a6 bf61000c    ...H.!..|....a..
-00040010: 90010024 48000005 7fc802a6 801effe8    ...$H...........
-00040020: 7fc0f214 7c7f1b78 813f004c 7c9c2378    ....|..x.?.L|.#x
-00040030: 807e8000 7cbd2b78 80090010 3b600000    .~..|.+x....;`..
-00040040: 7c0803a6 4e800021 813f004c 7f84e378    |...N..!.?.L...x
-00040050: 807e8004 80090010 7c0803a6 4e800021    .~......|...N..!
-00040060: 7c1be000 4181003c 80bd0000 813f004c    |...A..<.....?.L
-00040070: 3bbd0004 2c050000 40820008 80be8008    ;...,...@.......
-00040080: 80090010 7f64db78 807e800c 3b7b0001    .....d.x.~..;{..
-00040090: 7c0803a6 4e800021 7c1be000 4081ffcc    |...N..!|...@...
-000400a0: 813f004c 807e8010 80090010 7c0803a6    .?.L.~......|...
-000400b0: 4e800021 813f004c 80090004 7c0803a6    N..!.?.L....|...
-000400c0: 4e800021 2c030000 4182ffec 813f004c    N..!,...A....?.L
-000400d0: 80090000 7c0803a6 4e800021 813f004c    ....|...N..!.?.L
-000400e0: 807e8014 80090010 7c0803a6 4e800021    .~......|...N..!
-000400f0: 38600000 80010024 7c0803a6 bb61000c    8`.....$|....a..
-=> eeprom write 40000 0 40
-
-EEPROM write: addr 00040000  off 0000  count 64 ... done
-=> mw 50000 0 1000
-=> eeprom read 50000 0 40
-
-EEPROM read: addr 00050000  off 0000  count 64 ... done
-=> md 50000
-00050000: 00018148 9421ffe0 7c0802a6 bf61000c    ...H.!..|....a..
-00050010: 90010024 48000005 7fc802a6 801effe8    ...$H...........
-00050020: 7fc0f214 7c7f1b78 813f004c 7c9c2378    ....|..x.?.L|.#x
-00050030: 807e8000 7cbd2b78 80090010 3b600000    .~..|.+x....;`..
-00050040: 00000000 00000000 00000000 00000000    ................
-00050050: 00000000 00000000 00000000 00000000    ................
-00050060: 00000000 00000000 00000000 00000000    ................
-00050070: 00000000 00000000 00000000 00000000    ................
-00050080: 00000000 00000000 00000000 00000000    ................
-00050090: 00000000 00000000 00000000 00000000    ................
-000500a0: 00000000 00000000 00000000 00000000    ................
-000500b0: 00000000 00000000 00000000 00000000    ................
-000500c0: 00000000 00000000 00000000 00000000    ................
-000500d0: 00000000 00000000 00000000 00000000    ................
-000500e0: 00000000 00000000 00000000 00000000    ................
-000500f0: 00000000 00000000 00000000 00000000    ................
-=>
-------------------------------------------------------------------------------
-
-
-Patch per Mon, 06 Aug 2001 17:57:27:
-
-- upgraded Flash support (added support for the following chips:
-  AM29LV800T/B, AM29LV160T/B, AM29DL322T/B, AM29DL323T/B)
-- BCR tweakage for the 8260 bus mode
-- SIUMCR tweakage enabling the MI interrupt (IRQ7)
-
-To simplify switching between the bus modes, a new configuration
-option (CONFIG_BUSMODE_60x) has been added to the "config_TQM8260.h"
-file. If it is defined, BCR will be configured for the 60x mode,
-otherwise - for the 8260 mode.
-
-Concerning the SIUMCR modification: it's hard to predict whether it
-will induce any problems on the other (60x mode) board. However, the
-problems (if they appear) should be easy to notice - if the board
-does not boot, it's most likely caused by the DPPC configuration in
-SIUMCR.
diff --git a/board/tqc/tqm8260/tqm8260.c b/board/tqc/tqm8260/tqm8260.c
deleted file mode 100644
index c361f18..0000000
--- a/board/tqc/tqm8260/tqm8260.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 *ATMTXEN */
-	/* PA30 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTCA   */
-	/* PA29 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTSOC  */
-	/* PA28 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 *ATMRXEN */
-	/* PA27 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRSOC */
-	/* PA26 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRCA */
-	/* PA25 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC2 TXD */
-	/* PA8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC2 RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   0,   0,   1,   0,   0   }, /* PA6 */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   0,   0,   0,   1,   0,   0   }, /* PA1 */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   0,   0,   0,   0,   0   }, /* PB17 */
-	/* PB16 */ {   0,   0,   0,   0,   0,   0   }, /* PB16 */
-	/* PB15 */ {   0,   0,   0,   0,   0,   0   }, /* PB15 */
-	/* PB14 */ {   0,   0,   0,   0,   0,   0   }, /* PB14 */
-	/* PB13 */ {   0,   0,   0,   0,   0,   0   }, /* PB13 */
-	/* PB12 */ {   0,   0,   0,   0,   0,   0   }, /* PB12 */
-	/* PB11 */ {   0,   0,   0,   0,   0,   0   }, /* PB11 */
-	/* PB10 */ {   0,   0,   0,   0,   0,   0   }, /* PB10 */
-	/* PB9  */ {   0,   0,   0,   0,   0,   0   }, /* PB9 */
-	/* PB8  */ {   0,   0,   0,   0,   0,   0   }, /* PB8 */
-	/* PB7  */ {   0,   0,   0,   0,   0,   0   }, /* PB7 */
-	/* PB6  */ {   0,   0,   0,   0,   0,   0   }, /* PB6 */
-	/* PB5  */ {   0,   0,   0,   0,   0,   0   }, /* PB5 */
-	/* PB4  */ {   0,   0,   0,   0,   0,   0   }, /* PB4 */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   1,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* PC27 */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII TX_CLK */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   0,   0,   1,   0,   0   }, /* PC16 */
-	/* PC15 */ {   0,   0,   0,   1,   0,   0   }, /* PC15 */
-	/* PC14 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   0,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* PC11 */
-	/* PC10 */ {   0,   0,   0,   1,   0,   0   }, /* FCC2 MDC */
-	/* PC9  */ {   0,   0,   0,   1,   0,   0   }, /* FCC2 MDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   0,   0,   1,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   0,   0,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-#if defined(CONFIG_SYS_I2C_SOFT)
-	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
-	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
-	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
-#else /* normal I/O port pins */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SCL */
-#endif
-#endif
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts ("Board: ");
-
-	if (i < 0 || strncmp(buf, "TQM82", 5)) {
-		puts ("### No HW ID - assuming TQM8260\n");
-		return (0);
-	}
-
-	puts (buf);
-	putc ('\n');
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
-						  ulong orx, volatile uchar * base)
-{
-	volatile uchar c = 0xff;
-	volatile uint *sdmr_ptr;
-	volatile uint *orx_ptr;
-	ulong maxsize, size;
-	int i;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
-
-	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
-	 * we are configuring CS1 if base != 0
-	 */
-	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
-	orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
-	*orx_ptr = orx;
-
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
-	 */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
-	*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++)
-		*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*base = c;
-
-	size = get_ram_size((long *)base, maxsize);
-	*orx_ptr = orx | ~(size - 1);
-
-	return (size);
-}
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CONFIG_SYS_RAMBOOT
-	long size8, size9;
-#endif
-	long psize, lsize;
-
-	psize = 16 * 1024 * 1024;
-	lsize = 0;
-
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#if 0							/* Just for debugging */
-#define	prt_br_or(brX,orX) do {				\
-    ulong start =  memctl->memc_ ## brX & 0xFFFF8000;	\
-    ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF;	\
-    printf ("\n"					\
-	    #brX " 0x%08x  " #orX " 0x%08x "		\
-	    "==> 0x%08lx ... 0x%08lx = %ld MB\n",	\
-	memctl->memc_ ## brX, memctl->memc_ ## orX,	\
-	start, start+sizem, (sizem+1)>>20);		\
-    } while (0)
-	prt_br_or (br0, or0);
-	prt_br_or (br1, or1);
-	prt_br_or (br2, or2);
-	prt_br_or (br3, or3);
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-	/* 60x SDRAM setup:
-	 */
-	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE);
-
-	if (size8 < size9) {
-		psize = size9;
-		printf ("(60x:9COL - %ld MB, ", psize >> 20);
-	} else {
-		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-		printf ("(60x:8COL - %ld MB, ", psize >> 20);
-	}
-
-	/* Local SDRAM setup:
-	 */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
-	memctl->memc_lsrt = CONFIG_SYS_LSRT;
-	size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
-					  (uchar *) SDRAM_BASE2_PRELIM);
-	size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
-					  (uchar *) SDRAM_BASE2_PRELIM);
-
-	if (size8 < size9) {
-		lsize = size9;
-		printf ("Local:9COL - %ld MB) using ", lsize >> 20);
-	} else {
-		lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
-						  (uchar *) SDRAM_BASE2_PRELIM);
-		printf ("Local:8COL - %ld MB) using ", lsize >> 20);
-	}
-
-#if 0
-	/* Set up BR2 so that the local SDRAM goes
-	 * right after the 60x SDRAM
-	 */
-	memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
-			(CONFIG_SYS_SDRAM_BASE + psize);
-#endif
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	icache_enable ();
-
-	return (psize);
-}
-
-/* ------------------------------------------------------------------------- */