summaryrefslogtreecommitdiff
path: root/board/tqc/tqm85xx
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2012-10-03 23:36:18 +0000
committerTom Rini <trini@ti.com>2012-10-05 11:07:42 -0700
commitd923a5d59f2ca2ba4d31b424ff36ff282f858eb5 (patch)
treea2a15f6337c3ccca74650fc6587688c0211bfdec /board/tqc/tqm85xx
parent6f6ea814ed12e44d6a803fd47a2cbdbf2915ce7f (diff)
downloadu-boot-imx-d923a5d59f2ca2ba4d31b424ff36ff282f858eb5.zip
u-boot-imx-d923a5d59f2ca2ba4d31b424ff36ff282f858eb5.tar.gz
u-boot-imx-d923a5d59f2ca2ba4d31b424ff36ff282f858eb5.tar.bz2
MPC85xx: remove support for TQM85xx boards
Due to grown code sizes the TQM85xx boards don't build any more with some older tool chains (like ELDK 4.2). As these boards have long reached EOL it seems a waste of effort trying to fix them. The vendor has agreed to drop support for them, too. So let's get rid of them. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> cc: Kim Phillips <kim.phillips@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/tqc/tqm85xx')
-rw-r--r--board/tqc/tqm85xx/Makefile50
-rw-r--r--board/tqc/tqm85xx/law.c79
-rw-r--r--board/tqc/tqm85xx/nand.c472
-rw-r--r--board/tqc/tqm85xx/sdram.c436
-rw-r--r--board/tqc/tqm85xx/tlb.c214
-rw-r--r--board/tqc/tqm85xx/tqm85xx.c626
6 files changed, 0 insertions, 1877 deletions
diff --git a/board/tqc/tqm85xx/Makefile b/board/tqc/tqm85xx/Makefile
deleted file mode 100644
index 0a5501f..0000000
--- a/board/tqc/tqm85xx/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += sdram.o
-COBJS-y += law.o
-COBJS-y += tlb.o
-
-COBJS-$(CONFIG_NAND) += nand.o
-
-COBJS := $(COBJS-y)
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/tqc/tqm85xx/law.c b/board/tqc/tqm85xx/law.c
deleted file mode 100644
index c596303..0000000
--- a/board/tqc/tqm85xx/law.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * Standard mapping:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO or PCI express 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xe300_0000 0xe3ff_ffff CAN and NAND Flash 16M
- * 0xef00_0000 0xefff_ffff PCI express IO 16M
- * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 128M
- *
- * Big FLASH mapping:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xa000_ffff CCSR 1M
- * 0xa200_0000 0xa2ff_ffff PCI1 IO 16M
- * 0xa300_0000 0xa3ff_ffff CAN and NAND Flash 16M
- * 0xaf00_0000 0xafff_ffff PCI express IO 16M
- * 0xb000_0000 0xbfff_ffff RapidIO or PCI express 256M
- * 0xc000_0000 0xffff_ffff FLASH (boot bank) 1G
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#ifdef CONFIG_TQM_BIGFLASH
-#define LAW_3_SIZE LAW_SIZE_1G
-#define LAW_5_SIZE LAW_SIZE_256M
-#else
-#define LAW_3_SIZE LAW_SIZE_128M
-#define LAW_5_SIZE LAW_SIZE_512M
-#endif
-
-struct law_entry law_table[] = {
- SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_2G, LAW_TRGT_IF_DDR),
- SET_LAW(CONFIG_SYS_LBC_FLASH_BASE, LAW_3_SIZE, LAW_TRGT_IF_LBC),
-#ifndef CONFIG_PCIE1
- SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_RIO),
-#endif /* CONFIG_PCIE1 */
-#if defined(CONFIG_CAN_DRIVER) || defined(CONFIG_NAND)
- SET_LAW(CONFIG_SYS_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
-#endif /* CONFIG_CAN_DRIVER || CONFIG_NAND */
-};
-
-int num_law_entries = ARRAY_SIZE (law_table);
diff --git a/board/tqc/tqm85xx/nand.c b/board/tqc/tqm85xx/nand.c
deleted file mode 100644
index 4b16c31..0000000
--- a/board/tqc/tqm85xx/nand.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
- *
- * (C) Copyright 2006
- * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/fsl_upm.h>
-#include <ioports.h>
-
-#include <nand.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern uint get_lbc_clock (void);
-
-/* index of UPM RAM array run pattern for NAND command cycle */
-#define CONFIG_SYS_NAN_UPM_WRITE_CMD_OFS 0x08
-
-/* index of UPM RAM array run pattern for NAND address cycle */
-#define CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS 0x10
-
-/* Structure for table with supported UPM timings */
-struct upm_freq {
- ulong freq;
- const u32 *upm_patt;
- uchar gpl4_disable;
- uchar ehtr;
- uchar ead;
-};
-
-/* NAND-FLASH UPM tables for TQM85XX according to TQM8548.pq.timing.101.doc */
-
-/* UPM pattern for bus clock = 25 MHz */
-static const u32 upm_patt_25[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff32000, 0x0fa32000, 0x3fb32005, 0xfffffc00,
- /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 33.3 MHz */
-static const u32 upm_patt_33[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
- /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 41.7 MHz */
-static const u32 upm_patt_42[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
- /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 50 MHz */
-static const u32 upm_patt_50[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33000, 0x0fa33100, 0x0fa33005, 0xfffffc00,
- /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c35, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc35, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c05, 0xfffffc00,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 66.7 MHz */
-static const u32 upm_patt_67[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
- /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 83.3 MHz */
-static const u32 upm_patt_83[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
- /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3e30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3fe30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33e00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 100 MHz */
-static const u32 upm_patt_100[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33200, 0x0fa33000,
- /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3f30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ff30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33f00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 133.3 MHz */
-static const u32 upm_patt_133[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33300, 0x0fa33000,
- /* 0x04 */ 0x0fa33000, 0x0fa33005, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3f30, 0x00ff3d30, 0x0fff3d30, 0x0fff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ff30, 0x00f3fd30, 0x0ff3fd30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33f00, 0x00f33d00, 0x0ff33d00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 166.7 MHz */
-static const u32 upm_patt_167[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33200, 0x0fe33000, 0x0fa33300, 0x0fa33300,
- /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3f30, 0x00ff3f30, 0x0fff3e30, 0xffff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ff30, 0x00f3ff30, 0x0ff3fe30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33f00, 0x00f33f00, 0x0ff33e00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* Supported UPM timings */
-struct upm_freq upm_freq_table[] = {
- /* nominal freq. | ptr to table | GPL4 dis. | EHTR | EAD */
- {25000000, upm_patt_25, 1, 0, 0},
- {33333333, upm_patt_33, 1, 0, 0},
- {41666666, upm_patt_42, 1, 0, 0},
- {50000000, upm_patt_50, 0, 0, 0},
- {66666666, upm_patt_67, 0, 0, 0},
- {83333333, upm_patt_83, 0, 0, 0},
- {100000000, upm_patt_100, 0, 1, 1},
- {133333333, upm_patt_133, 0, 1, 1},
- {166666666, upm_patt_167, 0, 1, 1},
-};
-
-#define UPM_FREQS (sizeof(upm_freq_table) / sizeof(struct upm_freq))
-
-volatile const u32 *nand_upm_patt;
-
-/*
- * write into UPMB ram
- */
-static void upmb_write (u_char addr, ulong val)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
- out_be32 (&lbc->mdr, val);
-
- clrsetbits_be32(&lbc->mbmr, MxMR_MAD_MSK,
- MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
-
- /* dummy access to perform write */
- out_8 ((void __iomem *)CONFIG_SYS_NAND_BASE, 0);
-
- clrbits_be32(&lbc->mbmr, MxMR_OP_WARR);
-}
-
-/*
- * Initialize UPM for NAND flash access.
- */
-static void nand_upm_setup (volatile fsl_lbc_t *lbc)
-{
- uint i, j;
- uint or3 = CONFIG_SYS_OR3_PRELIM;
- uint clock = get_lbc_clock ();
-
- set_lbc_br(3, 0); /* disable bank and reset all bits */
- set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
-
- /*
- * Search appropriate UPM table for bus clock.
- * If the bus clock exceeds a tolerated value, take the UPM timing for
- * the next higher supported frequency to ensure that access works
- * (even the access may be slower then).
- */
- for (i = 0; (i < UPM_FREQS) && (clock > upm_freq_table[i].freq); i++)
- ;
-
- if (i >= UPM_FREQS)
- /* no valid entry found */
- /* take last entry with configuration for max. bus clock */
- i--;
-
- if (upm_freq_table[i].ehtr) {
- /* EHTR must be set due to TQM8548 timing specification */
- or3 |= OR_UPM_EHTR;
- }
- if (upm_freq_table[i].ead)
- /* EAD must be set due to TQM8548 timing specification */
- or3 |= OR_UPM_EAD;
-
- set_lbc_or(3, or3);
-
- /* Assign address of table */
- nand_upm_patt = upm_freq_table[i].upm_patt;
-
- for (j = 0; j < 64; j++) {
- upmb_write (j, *nand_upm_patt);
- nand_upm_patt++;
- }
-
- /* Put UPM back to normal operation mode */
- if (upm_freq_table[i].gpl4_disable)
- /* GPL4 must be disabled according to timing specification */
- out_be32 (&lbc->mbmr, MxMR_OP_NORM | MxMR_GPL_x4DIS);
-
- return;
-}
-
-static struct fsl_upm_nand fun = {
- .width = 8,
- .upm_cmd_offset = 0x08,
- .upm_addr_offset = 0x10,
- .upm_mar_chip_offset = CONFIG_SYS_NAND_CS_DIST,
- .chip_offset = CONFIG_SYS_NAND_CS_DIST,
- .chip_delay = NAND_BIG_DELAY_US,
- .wait_flags = FSL_UPM_WAIT_RUN_PATTERN | FSL_UPM_WAIT_WRITE_BUFFER,
-};
-
-void board_nand_select_device (struct nand_chip *nand, int chip)
-{
-}
-
-int board_nand_init (struct nand_chip *nand)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
- if (!nand_upm_patt)
- nand_upm_setup (lbc);
-
- fun.upm.io_addr = nand->IO_ADDR_R;
- fun.upm.mxmr = (void __iomem *)&lbc->mbmr;
- fun.upm.mdr = (void __iomem *)&lbc->mdr;
- fun.upm.mar = (void __iomem *)&lbc->mar;
-
- return fsl_upm_nand_init (nand, &fun);
-}
diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c
deleted file mode 100644
index baf073e..0000000
--- a/board/tqc/tqm85xx/sdram.c
+++ /dev/null
@@ -1,436 +0,0 @@
-
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-
-struct sdram_conf_s {
- unsigned long size;
- unsigned long reg;
-#ifdef CONFIG_TQM8548
- unsigned long refresh;
-#endif /* CONFIG_TQM8548 */
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
-#ifdef CONFIG_TQM8548
-#ifdef CONFIG_TQM8548_AG
-sdram_conf_t ddr_cs_conf[] = {
- {(1024 << 20), 0x80044202, 0x0002D000}, /* 1024MB, 14x10(4) */
- { (512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */
- { (256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */
- { (128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */
-};
-#else /* !CONFIG_TQM8548_AG */
-sdram_conf_t ddr_cs_conf[] = {
- {(512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */
- {(256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */
- {(128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */
-};
-#endif /* CONFIG_TQM8548_AG */
-#else /* !CONFIG_TQM8548 */
-sdram_conf_t ddr_cs_conf[] = {
- {(512 << 20), 0x80000202}, /* 512MB, 14x10(4) */
- {(256 << 20), 0x80000102}, /* 256MB, 13x10(4) */
- {(128 << 20), 0x80000101}, /* 128MB, 13x9(4) */
- {( 64 << 20), 0x80000001}, /* 64MB, 12x9(4) */
-};
-#endif /* CONFIG_TQM8548 */
-
-#define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
-
-int cas_latency (void);
-static phys_size_t sdram_setup(int);
-
-/*
- * Autodetect onboard DDR SDRAM on 85xx platforms
- *
- * NOTE: Some of the hardcoded values are hardware dependant,
- * so this should be extended for other future boards
- * using this routine!
- */
-phys_size_t fixed_sdram(void)
-{
- int casl = 0;
- phys_size_t dram_size = 0;
-
- casl = cas_latency();
- dram_size = sdram_setup(casl);
- if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
- /*
- * Try again with default CAS latency
- */
- printf("Problem with CAS lantency, using default CL %d/10!\n",
- CONFIG_DDR_DEFAULT_CL);
- dram_size = sdram_setup(CONFIG_DDR_DEFAULT_CL);
- puts(" ");
- }
- return dram_size;
-}
-
-static phys_size_t sdram_setup(int casl)
-{
- int i;
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-#ifdef CONFIG_TQM8548
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
- volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
-#endif
-#else /* !CONFIG_TQM8548 */
- unsigned long cfg_ddr_timing1;
- unsigned long cfg_ddr_mode;
-#endif /* CONFIG_TQM8548 */
-
- /*
- * Disable memory controller.
- */
- ddr->cs0_config = 0;
- ddr->sdram_cfg = 0;
-
-#ifdef CONFIG_TQM8548
- /* Timing and refresh settings for DDR2-533 and below */
-
- ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
- ddr->cs0_config = ddr_cs_conf[0].reg;
- ddr->timing_cfg_3 = 0x00020000;
-
- /* TIMING CFG 1, 533MHz
- * PRETOACT: 4 Clocks
- * ACTTOPRE: 12 Clocks
- * ACTTORW: 4 Clocks
- * CASLAT: 4 Clocks
- * REFREC: EXT_REFREC:REFREC 53 Clocks
- * WRREC: 4 Clocks
- * ACTTOACT: 3 Clocks
- * WRTORD: 2 Clocks
- */
- ddr->timing_cfg_1 = 0x4C47D432;
-
- /* TIMING CFG 2, 533MHz
- * ADD_LAT: 3 Clocks
- * CPO: READLAT + 1
- * WR_LAT: 3 Clocks
- * RD_TO_PRE: 2 Clocks
- * WR_DATA_DELAY: 1/2 Clock
- * CKE_PLS: 3 Clock
- * FOUR_ACT: 14 Clocks
- */
- ddr->timing_cfg_2 = 0x331848CE;
-
- /* DDR SDRAM Mode, 533MHz
- * MRS: Extended Mode Register
- * OUT: Outputs enabled
- * RDQS: no
- * DQS: enabled
- * OCD: default state
- * RTT: 75 Ohms
- * Posted CAS: 3 Clocks
- * ODS: reduced strength
- * DLL: enabled
- * MR: Mode Register
- * PD: fast exit
- * WR: 4 Clocks
- * DLL: no DLL reset
- * TM: normal
- * CAS latency: 4 Clocks
- * BT: sequential
- * Burst length: 4
- */
- ddr->sdram_mode = 0x439E0642;
-
- /* DDR SDRAM Interval, 533MHz
- * REFINT: 1040 Clocks
- * BSTOPRE: 256
- */
- ddr->sdram_interval = (1040 << 16) | 0x100;
-
- /*
- * Workaround for erratum DDR19 according to MPC8548 Device Errata
- * document, Rev. 1: DDR IO receiver must be set to an acceptable
- * bias point by modifying a hidden register.
- */
- if (SVR_REV (get_svr ()) < 0x21)
- gur->ddrioovcr = 0x90000000; /* enable, VSEL 1.8V */
-
- /* DDR SDRAM CFG 2
- * FRC_SR: normal mode
- * SR_IE: no self-refresh interrupt
- * DLL_RST_DIS: don't care, leave at reset value
- * DQS_CFG: differential DQS signals
- * ODT_CFG: assert ODT to internal IOs only during reads to DRAM
- * LVWx_CFG: don't care, leave at reset value
- * NUM_PR: 1 refresh will be issued at a time
- * DM_CFG: don't care, leave at reset value
- * D_INIT: no data initialization
- */
- ddr->sdram_cfg_2 = 0x04401000;
-
- /* DDR SDRAM MODE 2
- * MRS: Extended Mode Register 2
- */
- ddr->sdram_mode_2 = 0x8000C000;
-
- /* DDR SDRAM CLK CNTL
- * CLK_ADJUST: 1/2 Clock 0x02000000
- * CLK_ADJUST: 5/8 Clock 0x02800000
- */
- ddr->sdram_clk_cntl = 0x02800000;
-
- /* wait for clock stabilization */
- asm ("sync;isync;msync");
- udelay (1000);
-
-#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
- /*
- * Workaround for erratum DDR20 according to MPC8548 Device Errata
- * document, Rev. 1: "CKE signal may not function correctly after
- * assertion of HRESET"
- */
-
- /* 1. Configure DDR register as is done in normal DDR configuration.
- * Do not set DDR_SDRAM_CFG[MEM_EN].
- *
- * 2. Set reserved bit EEBACR[3] at offset 0x1000
- */
- ecm->eebacr |= 0x10000000;
-
- /*
- * 3. Before DDR_SDRAM_CFG[MEM_EN] is set, write DDR_SDRAM_CFG_2[D_INIT]
- *
- * DDR_SDRAM_CFG_2:
- * FRC_SR: normal mode
- * SR_IE: no self-refresh interrupt
- * DLL_RST_DIS: don't care, leave at reset value
- * DQS_CFG: differential DQS signals
- * ODT_CFG: assert ODT to internal IOs only during reads to DRAM
- * LVWx_CFG: don't care, leave at reset value
- * NUM_PR: 1 refresh will be issued at a time
- * DM_CFG: don't care, leave at reset value
- * D_INIT: enable data initialization
- */
- ddr->sdram_cfg_2 |= 0x00000010;
-
- /*
- * 4. Before DDR_SDRAM_CFG[MEM_EN] set, write D3[21] to disable data
- * training
- */
- ddr->debug[2] |= 0x00000400;
-
- /*
- * 5. Wait 200 micro-seconds
- */
- udelay (200);
-
- /*
- * 6. Set DDR_SDRAM_CFG[MEM_EN]
- *
- * BTW, initialize DDR_SDRAM_CFG:
- * MEM_EN: enabled
- * SREN: don't care, leave at reset value
- * ECC_EN: no error report
- * RD_EN: no registered DIMMs
- * SDRAM_TYPE: DDR2
- * DYN_PWR: no power management
- * 32_BE: don't care, leave at reset value
- * 8_BE: 4 beat burst
- * NCAP: don't care, leave at reset value
- * 2T_EN: 1T Timing
- * BA_INTLV_CTL: no interleaving
- * x32_EN: x16 organization
- * PCHB8: MA[10] for auto-precharge
- * HSE: half strength for single and 2-layer stacks
- * (full strength for 3- and 4-layer stacks not
- * yet considered)
- * MEM_HALT: no halt
- * BI: automatic initialization
- */
- ddr->sdram_cfg = 0x83000008;
-
- /*
- * 7. Poll DDR_SDRAM_CFG_2[D_INIT] until it is cleared by hardware
- */
- asm ("sync;isync;msync");
- while (ddr->sdram_cfg_2 & 0x00000010)
- asm ("eieio");
-
- /*
- * 8. Clear D3[21] to re-enable data training
- */
- ddr->debug[2] &= ~0x00000400;
-
- /*
- * 9. Set D2(21) to force data training to run
- */
- ddr->debug[1] |= 0x00000400;
-
- /*
- * 10. Poll on D2[21] until it is cleared by hardware
- */
- asm ("sync;isync;msync");
- while (ddr->debug[1] & 0x00000400)
- asm ("eieio");
-
- /*
- * 11. Clear reserved bit EEBACR[3] at offset 0x1000
- */
- ecm->eebacr &= ~0x10000000;
-
-#else /* !(CONFIG_TQM8548_AG || CONFIG_TQM8548_BE) */
-
- /* DDR SDRAM CLK CNTL
- * MEM_EN: enabled
- * SREN: don't care, leave at reset value
- * ECC_EN: no error report
- * RD_EN: no register DIMMs
- * SDRAM_TYPE: DDR2
- * DYN_PWR: no power management
- * 32_BE: don't care, leave at reset value
- * 8_BE: 4 beat burst
- * NCAP: don't care, leave at reset value
- * 2T_EN: 1T Timing
- * BA_INTLV_CTL: no interleaving
- * x32_EN: x16 organization
- * PCHB8: MA[10] for auto-precharge
- * HSE: half strength for single and 2-layer stacks
- * (full strength for 3- and 4-layer stacks no yet considered)
- * MEM_HALT: no halt
- * BI: automatic initialization
- */
- ddr->sdram_cfg = 0x83000008;
-
-#endif /* CONFIG_TQM8548_AG || CONFIG_TQM8548_BE */
-
- asm ("sync; isync; msync");
- udelay (1000);
-#else /* !CONFIG_TQM8548 */
- switch (casl) {
- case 20:
- cfg_ddr_timing1 = 0x47405331 | (3 << 16);
- cfg_ddr_mode = 0x40020002 | (2 << 4);
- break;
-
- case 25:
- cfg_ddr_timing1 = 0x47405331 | (4 << 16);
- cfg_ddr_mode = 0x40020002 | (6 << 4);
- break;
-
- case 30:
- default:
- cfg_ddr_timing1 = 0x47405331 | (5 << 16);
- cfg_ddr_mode = 0x40020002 | (3 << 4);
- break;
- }
-
- ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
- ddr->cs0_config = ddr_cs_conf[0].reg;
- ddr->timing_cfg_1 = cfg_ddr_timing1;
- ddr->timing_cfg_2 = 0x00000800; /* P9-45,may need tuning */
- ddr->sdram_mode = cfg_ddr_mode;
- ddr->sdram_interval = 0x05160100; /* autocharge,no open page */
- ddr->err_disable = 0x0000000D;
-
- asm ("sync; isync; msync");
- udelay (1000);
-
- ddr->sdram_cfg = 0xc2000000; /* unbuffered,no DYN_PWR */
- asm ("sync; isync; msync");
- udelay (1000);
-#endif /* CONFIG_TQM8548 */
-
- /*
- * get_ram_size() depends on having tlbs for the DDR, but they are
- * not yet setup because we don't know the size. Set up a temp
- * mapping and delete it when done.
- */
- setup_ddr_tlbs(CONFIG_SYS_DDR_EARLY_SIZE_MB);
- for (i = 0; i < N_DDR_CS_CONF; i++) {
- ddr->cs0_config = ddr_cs_conf[i].reg;
-
- if (get_ram_size (0, ddr_cs_conf[i].size) ==
- ddr_cs_conf[i].size) {
- /*
- * size detected -> set Chip Select Bounds Register
- */
- ddr->cs0_bnds = (ddr_cs_conf[i].size - 1) >> 24;
-
- break;
- }
- }
- clear_ddr_tlbs(CONFIG_SYS_DDR_EARLY_SIZE_MB);
-
-#ifdef CONFIG_TQM8548
- if (i < N_DDR_CS_CONF) {
- /* Adjust refresh rate for DDR2 */
-
- ddr->timing_cfg_3 = ddr_cs_conf[i].refresh & 0x00070000;
-
- ddr->timing_cfg_1 = (ddr->timing_cfg_1 & 0xFFFF0FFF) |
- (ddr_cs_conf[i].refresh & 0x0000F000);
-
- return ddr_cs_conf[i].size;
- }
-#endif /* CONFIG_TQM8548 */
-
- /* return size if detected, else return 0 */
- return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0;
-}
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
- uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
- uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
- uint *p;
-
- printf ("SDRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf ("SDRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf ("SDRAM test passed.\n");
- return 0;
-}
-#endif
diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c
deleted file mode 100644
index f9f8cc9..0000000
--- a/board/tqc/tqm85xx/tlb.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
- /* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
-#ifndef CONFIG_TQM_BIGFLASH
- /*
- * TLB 0, 1: 128M Non-cacheable, guarded
- * 0xf8000000 128M FLASH
- * Out of reset this entry is only 4K.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 1, BOOKE_PAGESZ_64M, 1),
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x4000000,
- CONFIG_SYS_FLASH_BASE + 0x4000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 0, BOOKE_PAGESZ_64M, 1),
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 3, BOOKE_PAGESZ_256M, 1),
-
-#ifdef CONFIG_PCIE1
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xc0000000 256M PCI express MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_BUS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 5: 256M Non-cacheable, guarded
- * 0xd0000000 256M PCI express MEM Second half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS + 0x10000000,
- CONFIG_SYS_PCIE1_MEM_BUS + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-#else /* !CONFIG_PCIE */
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 5: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
- CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-#endif /* CONFIG_PCIE */
-
- /*
- * TLB 6: 64M Non-cacheable, guarded
- * 0xe0000000 1M CCSRBAR
- * 0xe2000000 16M PCI1 IO
- * 0xe3000000 16M CAN and NAND Flash
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 6, BOOKE_PAGESZ_64M, 1),
-#ifdef CONFIG_PCIE1
- /*
- * TLB 9: 16M Non-cacheable, guarded
- * 0xef000000 16M PCI express IO
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BUS, CONFIG_SYS_PCIE1_IO_BUS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 9, BOOKE_PAGESZ_16M, 1),
-#endif /* CONFIG_PCIE */
-
-#else /* CONFIG_TQM_BIGFLASH */
-
- /*
- * TLB 0,1,2,3: 1G Non-cacheable, guarded
- * 0xc0000000 1G FLASH
- * Out of reset this entry is only 4K.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 3, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x10000000,
- CONFIG_SYS_FLASH_BASE + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x20000000,
- CONFIG_SYS_FLASH_BASE + 0x20000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 1, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x30000000,
- CONFIG_SYS_FLASH_BASE + 0x30000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 0, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 5: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-
-#ifdef CONFIG_PCIE1
- /*
- * TLB 6: 256M Non-cacheable, guarded
- * 0xc0000000 256M PCI express MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_BUS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 6, BOOKE_PAGESZ_256M, 1),
-#else /* !CONFIG_PCIE */
- /*
- * TLB 6: 256M Non-cacheable, guarded
- * 0xb0000000 256M Rapid IO MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 6, BOOKE_PAGESZ_256M, 1),
-
-#endif /* CONFIG_PCIE */
-
- /*
- * TLB 7: 64M Non-cacheable, guarded
- * 0xa0000000 1M CCSRBAR
- * 0xa2000000 16M PCI1 IO
- * 0xa3000000 16M CAN and NAND Flash
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 7, BOOKE_PAGESZ_64M, 1),
-#ifdef CONFIG_PCIE1
- /*
- * TLB 10: 16M Non-cacheable, guarded
- * 0xaf000000 16M PCI express IO
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 10, BOOKE_PAGESZ_16M, 1),
-#endif /* CONFIG_PCIE */
-
-#endif /* CONFIG_TQM_BIGFLASH */
-};
-
-int num_tlb_entries = ARRAY_SIZE (tlb_table);
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
deleted file mode 100644
index 8fb73ab..0000000
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ /dev/null
@@ -1,626 +0,0 @@
-/*
- * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
- *
- * (C) Copyright 2006
- * Thomas Waehner, TQ-Systems GmbH, thomas.waehner@tqs.de.
- *
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <linux/compiler.h>
-#include <ioports.h>
-#include <flash.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[]; /* FLASH chips info */
-
-void local_bus_init (void);
-ulong flash_get_size (ulong base, int banknum);
-
-#ifdef CONFIG_PS2MULT
-void ps2mult_early_init (void);
-#endif
-
-#ifdef CONFIG_CPM2
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A: conf, ppar, psor, pdir, podr, pdat */
- {
- {1, 1, 1, 0, 0, 0}, /* PA31: FCC1 MII COL */
- {1, 1, 1, 0, 0, 0}, /* PA30: FCC1 MII CRS */
- {1, 1, 1, 1, 0, 0}, /* PA29: FCC1 MII TX_ER */
- {1, 1, 1, 1, 0, 0}, /* PA28: FCC1 MII TX_EN */
- {1, 1, 1, 0, 0, 0}, /* PA27: FCC1 MII RX_DV */
- {1, 1, 1, 0, 0, 0}, /* PA26: FCC1 MII RX_ER */
- {0, 1, 0, 1, 0, 0}, /* PA25: FCC1 ATMTXD[0] */
- {0, 1, 0, 1, 0, 0}, /* PA24: FCC1 ATMTXD[1] */
- {0, 1, 0, 1, 0, 0}, /* PA23: FCC1 ATMTXD[2] */
- {0, 1, 0, 1, 0, 0}, /* PA22: FCC1 ATMTXD[3] */
- {1, 1, 0, 1, 0, 0}, /* PA21: FCC1 MII TxD[3] */
- {1, 1, 0, 1, 0, 0}, /* PA20: FCC1 MII TxD[2] */
- {1, 1, 0, 1, 0, 0}, /* PA19: FCC1 MII TxD[1] */
- {1, 1, 0, 1, 0, 0}, /* PA18: FCC1 MII TxD[0] */
- {1, 1, 0, 0, 0, 0}, /* PA17: FCC1 MII RxD[0] */
- {1, 1, 0, 0, 0, 0}, /* PA16: FCC1 MII RxD[1] */
- {1, 1, 0, 0, 0, 0}, /* PA15: FCC1 MII RxD[2] */
- {1, 1, 0, 0, 0, 0}, /* PA14: FCC1 MII RxD[3] */
- {0, 1, 0, 0, 0, 0}, /* PA13: FCC1 ATMRXD[3] */
- {0, 1, 0, 0, 0, 0}, /* PA12: FCC1 ATMRXD[2] */
- {0, 1, 0, 0, 0, 0}, /* PA11: FCC1 ATMRXD[1] */
- {0, 1, 0, 0, 0, 0}, /* PA10: FCC1 ATMRXD[0] */
- {0, 1, 1, 1, 0, 0}, /* PA9 : FCC1 L1TXD */
- {0, 1, 1, 0, 0, 0}, /* PA8 : FCC1 L1RXD */
- {0, 0, 0, 1, 0, 0}, /* PA7 : PA7 */
- {0, 1, 1, 1, 0, 0}, /* PA6 : TDM A1 L1RSYNC */
- {0, 0, 0, 1, 0, 0}, /* PA5 : PA5 */
- {0, 0, 0, 1, 0, 0}, /* PA4 : PA4 */
- {0, 0, 0, 1, 0, 0}, /* PA3 : PA3 */
- {0, 0, 0, 1, 0, 0}, /* PA2 : PA2 */
- {0, 0, 0, 0, 0, 0}, /* PA1 : FREERUN */
- {0, 0, 0, 1, 0, 0} /* PA0 : PA0 */
- },
-
- /* Port B: conf, ppar, psor, pdir, podr, pdat */
- {
- {1, 1, 0, 1, 0, 0}, /* PB31: FCC2 MII TX_ER */
- {1, 1, 0, 0, 0, 0}, /* PB30: FCC2 MII RX_DV */
- {1, 1, 1, 1, 0, 0}, /* PB29: FCC2 MII TX_EN */
- {1, 1, 0, 0, 0, 0}, /* PB28: FCC2 MII RX_ER */
- {1, 1, 0, 0, 0, 0}, /* PB27: FCC2 MII COL */
- {1, 1, 0, 0, 0, 0}, /* PB26: FCC2 MII CRS */
- {1, 1, 0, 1, 0, 0}, /* PB25: FCC2 MII TxD[3] */
- {1, 1, 0, 1, 0, 0}, /* PB24: FCC2 MII TxD[2] */
- {1, 1, 0, 1, 0, 0}, /* PB23: FCC2 MII TxD[1] */
- {1, 1, 0, 1, 0, 0}, /* PB22: FCC2 MII TxD[0] */
- {1, 1, 0, 0, 0, 0}, /* PB21: FCC2 MII RxD[0] */
- {1, 1, 0, 0, 0, 0}, /* PB20: FCC2 MII RxD[1] */
- {1, 1, 0, 0, 0, 0}, /* PB19: FCC2 MII RxD[2] */
- {1, 1, 0, 0, 0, 0}, /* PB18: FCC2 MII RxD[3] */
- {1, 1, 0, 0, 0, 0}, /* PB17: FCC3:RX_DIV */
- {1, 1, 0, 0, 0, 0}, /* PB16: FCC3:RX_ERR */
- {1, 1, 0, 1, 0, 0}, /* PB15: FCC3:TX_ERR */
- {1, 1, 0, 1, 0, 0}, /* PB14: FCC3:TX_EN */
- {1, 1, 0, 0, 0, 0}, /* PB13: FCC3:COL */
- {1, 1, 0, 0, 0, 0}, /* PB12: FCC3:CRS */
- {1, 1, 0, 0, 0, 0}, /* PB11: FCC3:RXD */
- {1, 1, 0, 0, 0, 0}, /* PB10: FCC3:RXD */
- {1, 1, 0, 0, 0, 0}, /* PB9 : FCC3:RXD */
- {1, 1, 0, 0, 0, 0}, /* PB8 : FCC3:RXD */
- {1, 1, 0, 1, 0, 0}, /* PB7 : FCC3:TXD */
- {1, 1, 0, 1, 0, 0}, /* PB6 : FCC3:TXD */
- {1, 1, 0, 1, 0, 0}, /* PB5 : FCC3:TXD */
- {1, 1, 0, 1, 0, 0}, /* PB4 : FCC3:TXD */
- {0, 0, 0, 0, 0, 0}, /* PB3 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0}, /* PB2 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0}, /* PB1 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0} /* PB0 : pin doesn't exist */
- },
-
- /* Port C: conf, ppar, psor, pdir, podr, pdat */
- {
- {0, 0, 0, 1, 0, 0}, /* PC31: PC31 */
- {0, 0, 0, 1, 0, 0}, /* PC30: PC30 */
- {0, 1, 1, 0, 0, 0}, /* PC29: SCC1 EN *CLSN */
- {0, 0, 0, 1, 0, 0}, /* PC28: PC28 */
- {0, 0, 0, 1, 0, 0}, /* PC27: UART Clock in */
- {0, 0, 0, 1, 0, 0}, /* PC26: PC26 */
- {0, 0, 0, 1, 0, 0}, /* PC25: PC25 */
- {0, 0, 0, 1, 0, 0}, /* PC24: PC24 */
- {0, 1, 0, 1, 0, 0}, /* PC23: ATMTFCLK */
- {0, 1, 0, 0, 0, 0}, /* PC22: ATMRFCLK */
- {1, 1, 0, 0, 0, 0}, /* PC21: SCC1 EN RXCLK */
- {1, 1, 0, 0, 0, 0}, /* PC20: SCC1 EN TXCLK */
- {1, 1, 0, 0, 0, 0}, /* PC19: FCC2 MII RX_CLK CLK13 */
- {1, 1, 0, 0, 0, 0}, /* PC18: FCC Tx Clock (CLK14) */
- {1, 1, 0, 0, 0, 0}, /* PC17: PC17 */
- {1, 1, 0, 0, 0, 0}, /* PC16: FCC Tx Clock (CLK16) */
- {0, 1, 0, 0, 0, 0}, /* PC15: PC15 */
- {0, 1, 0, 0, 0, 0}, /* PC14: SCC1 EN *CD */
- {0, 1, 0, 0, 0, 0}, /* PC13: PC13 */
- {0, 1, 0, 1, 0, 0}, /* PC12: PC12 */
- {0, 0, 0, 1, 0, 0}, /* PC11: LXT971 transmit control */
- {0, 0, 0, 1, 0, 0}, /* PC10: FETHMDC */
- {0, 0, 0, 0, 0, 0}, /* PC9 : FETHMDIO */
- {0, 0, 0, 1, 0, 0}, /* PC8 : PC8 */
- {0, 0, 0, 1, 0, 0}, /* PC7 : PC7 */
- {0, 0, 0, 1, 0, 0}, /* PC6 : PC6 */
- {0, 0, 0, 1, 0, 0}, /* PC5 : PC5 */
- {0, 0, 0, 1, 0, 0}, /* PC4 : PC4 */
- {0, 0, 0, 1, 0, 0}, /* PC3 : PC3 */
- {0, 0, 0, 1, 0, 1}, /* PC2 : ENET FDE */
- {0, 0, 0, 1, 0, 0}, /* PC1 : ENET DSQE */
- {0, 0, 0, 1, 0, 0}, /* PC0 : ENET LBK */
- },
-
- /* Port D: conf, ppar, psor, pdir, podr, pdat */
- {
-#ifdef CONFIG_TQM8560
- {1, 1, 0, 0, 0, 0}, /* PD31: SCC1 EN RxD */
- {1, 1, 1, 1, 0, 0}, /* PD30: SCC1 EN TxD */
- {1, 1, 0, 1, 0, 0}, /* PD29: SCC1 EN TENA */
-#else /* !CONFIG_TQM8560 */
- {0, 0, 0, 0, 0, 0}, /* PD31: PD31 */
- {0, 0, 0, 0, 0, 0}, /* PD30: PD30 */
- {0, 0, 0, 0, 0, 0}, /* PD29: PD29 */
-#endif /* CONFIG_TQM8560 */
- {1, 1, 0, 0, 0, 0}, /* PD28: PD28 */
- {1, 1, 0, 1, 0, 0}, /* PD27: PD27 */
- {1, 1, 0, 1, 0, 0}, /* PD26: PD26 */
- {0, 0, 0, 1, 0, 0}, /* PD25: PD25 */
- {0, 0, 0, 1, 0, 0}, /* PD24: PD24 */
- {0, 0, 0, 1, 0, 0}, /* PD23: PD23 */
- {0, 0, 0, 1, 0, 0}, /* PD22: PD22 */
- {0, 0, 0, 1, 0, 0}, /* PD21: PD21 */
- {0, 0, 0, 1, 0, 0}, /* PD20: PD20 */
- {0, 0, 0, 1, 0, 0}, /* PD19: PD19 */
- {0, 0, 0, 1, 0, 0}, /* PD18: PD18 */
- {0, 1, 0, 0, 0, 0}, /* PD17: FCC1 ATMRXPRTY */
- {0, 1, 0, 1, 0, 0}, /* PD16: FCC1 ATMTXPRTY */
- {0, 1, 1, 0, 1, 0}, /* PD15: I2C SDA */
- {0, 0, 0, 1, 0, 0}, /* PD14: LED */
- {0, 0, 0, 0, 0, 0}, /* PD13: PD13 */
- {0, 0, 0, 0, 0, 0}, /* PD12: PD12 */
- {0, 0, 0, 0, 0, 0}, /* PD11: PD11 */
- {0, 0, 0, 0, 0, 0}, /* PD10: PD10 */
- {0, 1, 0, 1, 0, 0}, /* PD9 : SMC1 TXD */
- {0, 1, 0, 0, 0, 0}, /* PD8 : SMC1 RXD */
- {0, 0, 0, 1, 0, 1}, /* PD7 : PD7 */
- {0, 0, 0, 1, 0, 1}, /* PD6 : PD6 */
- {0, 0, 0, 1, 0, 1}, /* PD5 : PD5 */
- {0, 0, 0, 1, 0, 1}, /* PD4 : PD4 */
- {0, 0, 0, 0, 0, 0}, /* PD3 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0}, /* PD2 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0}, /* PD1 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0} /* PD0 : pin doesn't exist */
- }
-};
-#endif /* CONFIG_CPM2 */
-
-#define CASL_STRING1 "casl=xx"
-#define CASL_STRING2 "casl="
-
-static const int casl_table[] = { 20, 25, 30 };
-#define N_CASL (sizeof(casl_table) / sizeof(casl_table[0]))
-
-int cas_latency (void)
-{
- char buf[128];
- int casl;
- int val;
- int i;
-
- casl = CONFIG_DDR_DEFAULT_CL;
-
- i = getenv_f("serial#", buf, sizeof(buf));
-
- if (i >0) {
- if (strncmp(buf + strlen (buf) - strlen (CASL_STRING1),
- CASL_STRING2, strlen (CASL_STRING2)) == 0) {
- val = simple_strtoul (buf + strlen (buf) - 2, NULL, 10);
-
- for (i = 0; i < N_CASL; ++i) {
- if (val == casl_table[i]) {
- return val;
- }
- }
- }
- }
-
- return casl;
-}
-
-int checkboard (void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- printf ("Board: %s", CONFIG_BOARDNAME);
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- putc ('\n');
-
- /*
- * Initialize local bus.
- */
- local_bus_init ();
-
- return 0;
-}
-
-int misc_init_r (void)
-{
- /*
- * Adjust flash start and offset to detected values
- */
- gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
- gd->bd->bi_flashoffset = 0;
-
- /*
- * Recalculate CS configuration if second FLASH bank is available
- */
- if (flash_info[0].size > 0) {
- set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) |
- (CONFIG_SYS_OR1_PRELIM & 0x00007fff));
- set_lbc_br(1, gd->bd->bi_flashstart |
- (CONFIG_SYS_BR1_PRELIM & 0x00007fff));
- /*
- * Re-check to get correct base address for bank 1
- */
- flash_get_size (gd->bd->bi_flashstart, 0);
- } else {
- set_lbc_or(1, 0);
- set_lbc_br(1, 0);
- }
-
- /*
- * If bank 1 is equipped, bank 0 is mapped after bank 1
- */
- set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) |
- (CONFIG_SYS_OR0_PRELIM & 0x00007fff));
- set_lbc_br(0, (gd->bd->bi_flashstart + flash_info[0].size) |
- (CONFIG_SYS_BR0_PRELIM & 0x00007fff));
-
- /*
- * Re-check to get correct base address for bank 0
- */
- flash_get_size (gd->bd->bi_flashstart + flash_info[0].size, 1);
-
- /*
- * Re-do flash protection upon new addresses
- */
- flash_protect (FLAG_PROTECT_CLEAR,
- gd->bd->bi_flashstart, 0xffffffff,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
- /* Monitor protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE, 0xffffffff,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
- /* Environment protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- /* Redundant environment protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-#endif
-
- return 0;
-}
-
-#ifdef CONFIG_CAN_DRIVER
-/*
- * Initialize UPMC RAM
- */
-static void upmc_write (u_char addr, uint val)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
- out_be32 (&lbc->mdr, val);
-
- clrsetbits_be32(&lbc->mcmr, MxMR_MAD_MSK,
- MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
-
- /* dummy access to perform write */
- out_8 ((void __iomem *)CONFIG_SYS_CAN_BASE, 0);
-
- /* normal operation */
- clrbits_be32(&lbc->mcmr, MxMR_OP_WARR);
-}
-#endif /* CONFIG_CAN_DRIVER */
-
-uint get_lbc_clock (void)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- sys_info_t sys_info;
- ulong clkdiv = lbc->lcrr & LCRR_CLKDIV;
-
- get_sys_info (&sys_info);
-
- if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#ifdef CONFIG_MPC8548
- /*
- * Yes, the entire PQ38 family use the same
- * bit-representation for twice the clock divider value.
- */
- clkdiv *= 2;
-#endif
- return sys_info.freqSystemBus / clkdiv;
- }
-
- puts("Invalid clock divider value in CONFIG_SYS_LBC_LCRR\n");
-
- return 0;
-}
-
-/*
- * Initialize Local Bus
- */
-void local_bus_init (void)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- uint lbc_mhz = get_lbc_clock () / 1000000;
-
-#ifdef CONFIG_MPC8548
- uint svr = get_svr ();
- uint lcrr;
-
- /*
- * MPC revision < 2.0
- * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU1:
- * Modify engineering use only register at address 0xE_0F20.
- * "1. Read register at offset 0xE_0F20
- * 2. And value with 0x0000_FFFF
- * 3. OR result with 0x0000_0004
- * 4. Write result back to offset 0xE_0F20."
- *
- * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU2:
- * Modify engineering use only register at address 0xE_0F20.
- * "1. Read register at offset 0xE_0F20
- * 2. And value with 0xFFFF_FFDF
- * 3. Write result back to offset 0xE_0F20."
- *
- * Since it is the same register, we do the modification in one step.
- */
- if (SVR_MAJ (svr) < 2) {
- uint dummy = gur->lbiuiplldcr1;
- dummy &= 0x0000FFDF;
- dummy |= 0x00000004;
- gur->lbiuiplldcr1 = dummy;
- }
-
- lcrr = CONFIG_SYS_LBC_LCRR;
-
- /*
- * Local Bus Clock > 83.3 MHz. According to timing
- * specifications set LCRR[EADC] to 2 delay cycles.
- */
- if (lbc_mhz > 83) {
- lcrr &= ~LCRR_EADC;
- lcrr |= LCRR_EADC_2;
- }
-
- /*
- * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30
- * disable PLL bypass for Local Bus Clock > 83 MHz.
- */
- if (lbc_mhz >= 66)
- lcrr &= (~LCRR_DBYP); /* DLL Enabled */
-
- else
- lcrr |= LCRR_DBYP; /* DLL Bypass */
-
- lbc->lcrr = lcrr;
- asm ("sync;isync;msync");
-
- /*
- * According to MPC8548ERMAD Rev.1.3 read back LCRR
- * and terminate with isync
- */
- lcrr = lbc->lcrr;
- asm ("isync;");
-
- /* let DLL stabilize */
- udelay (500);
-
-#else /* !CONFIG_MPC8548 */
-
- /*
- * Errata LBC11.
- * Fix Local Bus clock glitch when DLL is enabled.
- *
- * If localbus freq is < 66MHz, DLL bypass mode must be used.
- * If localbus freq is > 133MHz, DLL can be safely enabled.
- * Between 66 and 133, the DLL is enabled with an override workaround.
- */
-
- if (lbc_mhz < 66) {
- lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
- lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA |
- LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */
-
- } else if (lbc_mhz >= 133) {
- lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
-
- } else {
- /*
- * On REV1 boards, need to change CLKDIV before enable DLL.
- * Default CLKDIV is 8, change it to 4 temporarily.
- */
- uint pvr = get_pvr ();
- uint temp_lbcdll = 0;
-
- if (pvr == PVR_85xx_REV1) {
- /* FIXME: Justify the high bit here. */
- lbc->lcrr = 0x10000004;
- }
-
- lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
- udelay (200);
-
- /*
- * Sample LBC DLL ctrl reg, upshift it to set the
- * override bits.
- */
- temp_lbcdll = gur->lbcdllcr;
- gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
- asm ("sync;isync;msync");
- }
-#endif /* !CONFIG_MPC8548 */
-
-#ifdef CONFIG_CAN_DRIVER
- /*
- * According to timing specifications EAD must be
- * set if Local Bus Clock is > 83 MHz.
- */
- if (lbc_mhz > 83)
- set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
- else
- set_lbc_or(2, CONFIG_SYS_OR2_CAN);
- set_lbc_br(2, CONFIG_SYS_BR2_CAN);
-
- /* LGPL4 is UPWAIT */
- out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X);
-
- /* Initialize UPMC for CAN: single read */
- upmc_write (0x00, 0xFFFFED00);
- upmc_write (0x01, 0xCCFFCC00);
- upmc_write (0x02, 0x00FFCF00);
- upmc_write (0x03, 0x00FFCF00);
- upmc_write (0x04, 0x00FFDC00);
- upmc_write (0x05, 0x00FFCF00);
- upmc_write (0x06, 0x00FFED00);
- upmc_write (0x07, 0x3FFFCC07);
-
- /* Initialize UPMC for CAN: single write */
- upmc_write (0x18, 0xFFFFED00);
- upmc_write (0x19, 0xCCFFEC00);
- upmc_write (0x1A, 0x00FFED80);
- upmc_write (0x1B, 0x00FFED80);
- upmc_write (0x1C, 0x00FFFC00);
- upmc_write (0x1D, 0x0FFFEC00);
- upmc_write (0x1E, 0x0FFFEF00);
- upmc_write (0x1F, 0x3FFFEC05);
-#endif /* CONFIG_CAN_DRIVER */
-}
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifdef CONFIG_PCI1
-static struct pci_controller pci1_hose;
-#endif /* CONFIG_PCI1 */
-
-void pci_init_board (void)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int first_free_busno = 0;
-#ifdef CONFIG_PCI1
- struct fsl_pci_info pci_info;
- int pcie_ep;
-
- u32 devdisr = in_be32(&gur->devdisr);
-
- uint pci_32 = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_PCI32;
- uint pci_arb = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_ARB;
- uint pci_speed = CONFIG_SYS_CLK_FREQ; /* PCI PSPEED in [4:5] */
- uint pci_clk_sel = in_be32(&gur->porpllsr) & MPC85xx_PORDEVSR_PCI1_SPD;
-
- if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
- SET_STD_PCI_INFO(pci_info, 1);
- set_next_law(pci_info.mem_phys,
- law_size_bits(pci_info.mem_size), pci_info.law);
- set_next_law(pci_info.io_phys,
- law_size_bits(pci_info.io_size), pci_info.law);
-
- pcie_ep = fsl_setup_hose(&pci1_hose, pci_info.regs);
- printf("PCI1: %d bit, %s MHz, %s, %s, %s\n",
- (pci_32) ? 32 : 64,
- (pci_speed == 33333333) ? "33" :
- (pci_speed == 66666666) ? "66" : "unknown",
- pci_clk_sel ? "sync" : "async",
- pcie_ep ? "agent" : "host",
- pci_arb ? "arbiter" : "external-arbiter");
- first_free_busno = fsl_pci_init_port(&pci_info,
- &pci1_hose, first_free_busno);
-#ifdef CONFIG_PCIX_CHECK
- if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1)) {
- ushort reg16 =
- PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
- PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
- uint dev = PCI_BDF(0, 0, 0);
-
- /* PCI-X init */
- if (CONFIG_SYS_CLK_FREQ < 66000000)
- puts ("PCI-X will only work at 66 MHz\n");
-
- pci_write_config_word(dev, PCIX_COMMAND, reg16);
- }
-#endif
- } else {
- printf("PCI1: disabled\n");
- }
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
-#endif
-
- fsl_pcie_init_board(first_free_busno);
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup (void *blob, bd_t *bd)
-{
- ft_cpu_setup (blob, bd);
-
- FT_FSL_PCI_SETUP;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
-
-#ifdef CONFIG_BOARD_EARLY_INIT_R
-int board_early_init_r (void)
-{
-#ifdef CONFIG_PS2MULT
- ps2mult_early_init ();
-#endif /* CONFIG_PS2MULT */
- return (0);
-}
-#endif /* CONFIG_BOARD_EARLY_INIT_R */
-
-int board_eth_init(bd_t *bis)
-{
- cpu_eth_init(bis); /* Intialize TSECs first */
- return pci_eth_init(bis);
-}