TQM: move TQM boards to board/tqc

Move all TQM board directories to the vendor specific directory "tqc"
for modules from TQ-Components GmbH (http://www.tqc.de).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

4 files changed, 728 insertions, 0 deletions

diff --git a/board/tqc/tqm834x/Makefile b/board/tqc/tqm834x/Makefile
new file mode 100644
index 0000000..4c0d204
--- /dev/null
+++ b/board/tqc/tqm834x/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright 2004 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o pci.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/tqc/tqm834x/config.mk b/board/tqc/tqm834x/config.mk
new file mode 100644
index 0000000..f172c4e
--- /dev/null
+++ b/board/tqc/tqm834x/config.mk
@@ -0,0 +1,23 @@
+#
+# Copyright 2004 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE   =   0x80000000
diff --git a/board/tqc/tqm834x/pci.c b/board/tqc/tqm834x/pci.c
new file mode 100644
index 0000000..e3d0309
--- /dev/null
+++ b/board/tqc/tqm834x/pci.c
@@ -0,0 +1,220 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <asm/mmu.h>
+#include <common.h>
+#include <pci.h>
+
+#ifdef CONFIG_PCI
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_tqm834x_config_table[] = {
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
+	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+				     PCI_ENET0_MEMADDR,
+				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+		}
+	},
+	{}
+};
+#endif
+
+static struct pci_controller pci1_hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table:pci_tqm834x_config_table,
+#endif
+};
+
+
+/**************************************************************************
+ * pci_init_board()
+ *
+ * NOTICE: MPC8349 internally has two PCI controllers (PCI1 and PCI2) but since
+ * per TQM834x design physical connections to external devices (PCI sockets)
+ * are routed only to the PCI1 we do not account for the second one - this code
+ * supports PCI1 module only. Should support for the PCI2 be required in the
+ * future it needs a separate pci_controller structure (above) and handling -
+ * please refer to other boards' implementation for dual PCI host controllers,
+ * for example board/Marvell/db64360/pci.c, pci_init_board()
+ *
+ */
+void
+pci_init_board(void)
+{
+	volatile immap_t *	immr;
+	volatile clk83xx_t *	clk;
+	volatile law83xx_t *	pci_law;
+	volatile pot83xx_t *	pci_pot;
+	volatile pcictrl83xx_t *	pci_ctrl;
+	volatile pciconf83xx_t *	pci_conf;
+	u16 reg16;
+	u32 reg32;
+	struct	pci_controller * hose;
+
+	immr = (immap_t *)CFG_IMMR;
+	clk = (clk83xx_t *)&immr->clk;
+	pci_law = immr->sysconf.pcilaw;
+	pci_pot = immr->ios.pot;
+	pci_ctrl = immr->pci_ctrl;
+	pci_conf = immr->pci_conf;
+
+	hose = &pci1_hose;
+
+	/*
+	 * Configure PCI controller and PCI_CLK_OUTPUT
+	 */
+
+	/*
+	 * WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one
+	 * line actually used for clocking all external PCI devices in TQM83xx.
+	 * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for
+	 * unknown reasons - particularly PCI_CLK_OUTPUT6 and PCI_CLK_OUTPUT7
+	 * are known to hang the board; this issue is under investigation
+	 * (13 oct 05)
+	 */
+	reg32 = OCCR_PCICOE1;
+#if 0
+	/* enabling all PCI_CLK_OUTPUT lines HANGS the board... */
+	reg32 = 0xff000000;
+#endif
+	if (clk->spmr & SPMR_CKID) {
+		/* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR
+		 * fields accordingly */
+		reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR);
+
+		reg32 |= (OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 \
+			  | OCCR_PCICD3 | OCCR_PCICD4 | OCCR_PCICD5 \
+			  | OCCR_PCICD6 | OCCR_PCICD7);
+	}
+
+	clk->occr = reg32;
+	udelay(2000);
+
+	/*
+	 * Release PCI RST Output signal
+	 */
+	pci_ctrl[0].gcr = 0;
+	udelay(2000);
+	pci_ctrl[0].gcr = 1;
+	udelay(2000);
+
+	/*
+	 * Configure PCI Local Access Windows
+	 */
+	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
+
+	/*
+	 * Configure PCI Outbound Translation Windows
+	 */
+
+	/* PCI1 mem space */
+	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK);
+
+	/* PCI1 IO space */
+	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
+
+	/*
+	 * Configure PCI Inbound Translation Windows
+	 */
+
+	/* we need RAM mapped to PCI space for the devices to
+	 * access main memory */
+	pci_ctrl[0].pitar1 = 0x0;
+	pci_ctrl[0].pibar1 = 0x0;
+	pci_ctrl[0].piebar1 = 0x0;
+	pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_256M;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	/* PCI memory space */
+	pci_set_region(hose->regions + 0,
+		       CFG_PCI1_MEM_BASE,
+		       CFG_PCI1_MEM_PHYS,
+		       CFG_PCI1_MEM_SIZE,
+		       PCI_REGION_MEM);
+
+	/* PCI IO space */
+	pci_set_region(hose->regions + 1,
+		       CFG_PCI1_IO_BASE,
+		       CFG_PCI1_IO_PHYS,
+		       CFG_PCI1_IO_SIZE,
+		       PCI_REGION_IO);
+
+	/* System memory space */
+	pci_set_region(hose->regions + 2,
+		       CONFIG_PCI_SYS_MEM_BUS,
+		       CONFIG_PCI_SYS_MEM_PHYS,
+		       CONFIG_PCI_SYS_MEM_SIZE,
+		       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	hose->region_count = 3;
+
+	pci_setup_indirect(hose,
+			   (CFG_IMMR+0x8300),
+			   (CFG_IMMR+0x8304));
+
+	pci_register_hose(hose);
+
+	/*
+	 * Write to Command register
+	 */
+	reg16 = 0xff;
+	pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND,
+					&reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND,
+					reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS,
+					0xffff);
+	pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER,
+					0x80);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+	printf("PCI:   Bus Dev VenId DevId Class Int\n");
+#endif
+	/*
+	 * Hose scan.
+	 */
+	hose->last_busno = pci_hose_scan(hose);
+}
+#endif /* CONFIG_PCI */
diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c
new file mode 100644
index 0000000..aea985c
--- /dev/null
+++ b/board/tqc/tqm834x/tqm834x.c
@@ -0,0 +1,433 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <asm/mpc8349_pci.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <asm-ppc/mmu.h>
+#include <pci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define IOSYNC			asm("eieio")
+#define ISYNC			asm("isync")
+#define SYNC			asm("sync")
+#define FPW			FLASH_PORT_WIDTH
+#define FPWV			FLASH_PORT_WIDTHV
+
+#define DDR_MAX_SIZE_PER_CS	0x20000000
+
+#if defined(DDR_CASLAT_20)
+#define TIMING_CASLAT		TIMING_CFG1_CASLAT_20
+#define MODE_CASLAT		DDR_MODE_CASLAT_20
+#else
+#define TIMING_CASLAT		TIMING_CFG1_CASLAT_25
+#define MODE_CASLAT		DDR_MODE_CASLAT_25
+#endif
+
+#define INITIAL_CS_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_12 | \
+				CSCONFIG_COL_BIT_9)
+
+/* Global variable used to store detected number of banks */
+int tqm834x_num_flash_banks;
+
+/* External definitions */
+ulong flash_get_size (ulong base, int banknum);
+extern flash_info_t flash_info[];
+
+/* Local functions */
+static int detect_num_flash_banks(void);
+static long int get_ddr_bank_size(short cs, volatile long *base);
+static void set_cs_bounds(short cs, long base, long size);
+static void set_cs_config(short cs, long config);
+static void set_ddr_config(void);
+
+/* Local variable */
+static volatile immap_t *im = (immap_t *)CFG_IMMR;
+
+/**************************************************************************
+ * Board initialzation after relocation to RAM. Used to detect the number
+ * of Flash banks on TQM834x.
+ */
+int board_early_init_r (void) {
+	/* sanity check, IMMARBAR should be mirrored at offset zero of IMMR */
+	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+		return 0;
+
+	/* detect the number of Flash banks */
+	return detect_num_flash_banks();
+}
+
+/**************************************************************************
+ * DRAM initalization and size detection
+ */
+long int initdram (int board_type)
+{
+	long bank_size;
+	long size;
+	int cs;
+
+	/* during size detection, set up the max DDRLAW size */
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE;
+	im->sysconf.ddrlaw[0].ar = (LAWAR_EN | LAWAR_SIZE_2G);
+
+	/* set CS bounds to maximum size */
+	for(cs = 0; cs < 4; ++cs) {
+		set_cs_bounds(cs,
+			CFG_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
+			DDR_MAX_SIZE_PER_CS);
+
+		set_cs_config(cs, INITIAL_CS_CONFIG);
+	}
+
+	/* configure ddr controller */
+	set_ddr_config();
+
+	udelay(200);
+
+	/* enable DDR controller */
+	im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN |
+		SDRAM_CFG_SREN |
+		SDRAM_CFG_SDRAM_TYPE_DDR1);
+	SYNC;
+
+	/* size detection */
+	debug("\n");
+	size = 0;
+	for(cs = 0; cs < 4; ++cs) {
+		debug("\nDetecting Bank%d\n", cs);
+
+		bank_size = get_ddr_bank_size(cs,
+			(volatile long*)(CFG_DDR_BASE + size));
+		size += bank_size;
+
+		debug("DDR Bank%d size: %d MiB\n\n", cs, bank_size >> 20);
+
+		/* exit if less than one bank */
+		if(size < DDR_MAX_SIZE_PER_CS) break;
+	}
+
+	return size;
+}
+
+/**************************************************************************
+ * checkboard()
+ */
+int checkboard (void)
+{
+	puts("Board: TQM834x\n");
+
+#ifdef CONFIG_PCI
+	volatile immap_t * immr;
+	u32 w, f;
+
+	immr = (immap_t *)CFG_IMMR;
+	if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) {
+		printf("PCI:   NOT in host mode..?!\n");
+		return 0;
+	}
+
+	/* get bus width */
+	w = 32;
+	if (immr->reset.rcwh & HRCWH_64_BIT_PCI)
+		w = 64;
+
+	/* get clock */
+	f = gd->pci_clk;
+
+	printf("PCI1:  %d bit, %d MHz\n", w, f / 1000000);
+#else
+	printf("PCI:   disabled\n");
+#endif
+	return 0;
+}
+
+
+/**************************************************************************
+ *
+ * Local functions
+ *
+ *************************************************************************/
+
+/**************************************************************************
+ * Detect the number of flash banks (1 or 2). Store it in
+ * a global variable tqm834x_num_flash_banks.
+ * Bank detection code based on the Monitor code.
+ */
+static int detect_num_flash_banks(void)
+{
+	typedef unsigned long FLASH_PORT_WIDTH;
+	typedef volatile unsigned long FLASH_PORT_WIDTHV;
+	FPWV *bank1_base;
+	FPWV *bank2_base;
+	FPW bank1_read;
+	FPW bank2_read;
+	ulong bank1_size;
+	ulong bank2_size;
+	ulong total_size;
+
+	tqm834x_num_flash_banks = 2;	/* assume two banks */
+
+	/* Get bank 1 and 2 information */
+	bank1_size = flash_get_size(CFG_FLASH_BASE, 0);
+	debug("Bank1 size: %lu\n", bank1_size);
+	bank2_size = flash_get_size(CFG_FLASH_BASE + bank1_size, 1);
+	debug("Bank2 size: %lu\n", bank2_size);
+	total_size = bank1_size + bank2_size;
+
+	if (bank2_size > 0) {
+		/* Seems like we've got bank 2, but maybe it's mirrored 1 */
+
+		/* Set the base addresses */
+		bank1_base = (FPWV *) (CFG_FLASH_BASE);
+		bank2_base = (FPWV *) (CFG_FLASH_BASE + bank1_size);
+
+		/* Put bank 2 into CFI command mode and read */
+		bank2_base[0x55] = 0x00980098;
+		IOSYNC;
+		ISYNC;
+		bank2_read = bank2_base[0x10];
+
+		/* Read from bank 1 (it's in read mode) */
+		bank1_read = bank1_base[0x10];
+
+		/* Reset Flash */
+		bank1_base[0] = 0x00F000F0;
+		bank2_base[0] = 0x00F000F0;
+
+		if (bank2_read == bank1_read) {
+			/*
+			 * Looks like just one bank, but not sure yet. Let's
+			 * read from bank 2 in autosoelect mode.
+			 */
+			bank2_base[0x0555] = 0x00AA00AA;
+			bank2_base[0x02AA] = 0x00550055;
+			bank2_base[0x0555] = 0x00900090;
+			IOSYNC;
+			ISYNC;
+			bank2_read = bank2_base[0x10];
+
+			/* Read from bank 1 (it's in read mode) */
+			bank1_read = bank1_base[0x10];
+
+			/* Reset Flash */
+			bank1_base[0] = 0x00F000F0;
+			bank2_base[0] = 0x00F000F0;
+
+			if (bank2_read == bank1_read) {
+				/*
+				 * In both CFI command and autoselect modes,
+				 * we got the some data reading from Flash.
+				 * There is only one mirrored bank.
+				 */
+				tqm834x_num_flash_banks = 1;
+				total_size = bank1_size;
+			}
+		}
+	}
+
+	debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks);
+
+	/* set OR0 and BR0 */
+	im->lbus.bank[0].or = CFG_OR_TIMING_FLASH |
+		(-(total_size) & OR_GPCM_AM);
+	im->lbus.bank[0].br = (CFG_FLASH_BASE & BR_BA) |
+		(BR_MS_GPCM | BR_PS_32 | BR_V);
+
+	return (0);
+}
+
+/*************************************************************************
+ * Detect the size of a ddr bank. Sets CS bounds and CS config accordingly.
+ */
+static long int get_ddr_bank_size(short cs, volatile long *base)
+{
+	/* This array lists all valid DDR SDRAM configurations, with
+	 * Bank sizes in bytes. (Refer to Table 9-27 in the MPC8349E RM).
+	 * The last entry has to to have size equal 0 and is igonred during
+	 * autodection. Bank sizes must be in increasing order of size
+	 */
+	struct {
+		long row;
+		long col;
+		long size;
+	} conf[] = {
+		{CSCONFIG_ROW_BIT_12,	CSCONFIG_COL_BIT_8,	32 << 20},
+		{CSCONFIG_ROW_BIT_12,	CSCONFIG_COL_BIT_9,	64 << 20},
+		{CSCONFIG_ROW_BIT_12,	CSCONFIG_COL_BIT_10,	128 << 20},
+		{CSCONFIG_ROW_BIT_13,	CSCONFIG_COL_BIT_9,	128 << 20},
+		{CSCONFIG_ROW_BIT_13,	CSCONFIG_COL_BIT_10,	256 << 20},
+		{CSCONFIG_ROW_BIT_13,	CSCONFIG_COL_BIT_11,	512 << 20},
+		{CSCONFIG_ROW_BIT_14,	CSCONFIG_COL_BIT_10,	512 << 20},
+		{CSCONFIG_ROW_BIT_14,	CSCONFIG_COL_BIT_11,	1024 << 20},
+		{0,			0,			0}
+	};
+
+	int i;
+	int detected;
+	long size;
+
+	detected = -1;
+	for(i = 0; conf[i].size != 0; ++i) {
+
+		/* set sdram bank configuration */
+		set_cs_config(cs, CSCONFIG_EN | conf[i].col | conf[i].row);
+
+		debug("Getting RAM size...\n");
+		size = get_ram_size(base, DDR_MAX_SIZE_PER_CS);
+
+		if((size == conf[i].size) && (i == detected + 1))
+			detected = i;
+
+		debug("Trying %ld x %ld (%ld MiB) at addr %p, detected: %ld MiB\n",
+			conf[i].row,
+			conf[i].col,
+			conf[i].size >> 20,
+			base,
+			size >> 20);
+	}
+
+	if(detected == -1){
+		/* disable empty cs */
+		debug("\nNo valid configurations for CS%d, disabling...\n", cs);
+		set_cs_config(cs, 0);
+		return 0;
+	}
+
+	debug("\nDetected configuration %ld x %ld (%ld MiB) at addr %p\n",
+			conf[detected].row, conf[detected].col, conf[detected].size >> 20, base);
+
+	/* configure cs ro detected params */
+	set_cs_config(cs, CSCONFIG_EN | conf[detected].row |
+			conf[detected].col);
+
+	set_cs_bounds(cs, (long)base, conf[detected].size);
+
+	return(conf[detected].size);
+}
+
+/**************************************************************************
+ * Sets DDR bank CS bounds.
+ */
+static void set_cs_bounds(short cs, long base, long size)
+{
+	debug("Setting bounds %08x, %08x for cs %d\n", base, size, cs);
+	if(size == 0){
+		im->ddr.csbnds[cs].csbnds = 0x00000000;
+	} else {
+		im->ddr.csbnds[cs].csbnds =
+			((base >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
+			(((base + size - 1) >> CSBNDS_EA_SHIFT) &
+				CSBNDS_EA);
+	}
+	SYNC;
+}
+
+/**************************************************************************
+ * Sets DDR banks CS configuration.
+ * config == 0x00000000 disables the CS.
+ */
+static void set_cs_config(short cs, long config)
+{
+	debug("Setting config %08x for cs %d\n", config, cs);
+	im->ddr.cs_config[cs] = config;
+	SYNC;
+}
+
+/**************************************************************************
+ * Sets DDR clocks, timings and configuration.
+ */
+static void set_ddr_config(void) {
+	/* clock control */
+	im->ddr.sdram_clk_cntl = DDR_SDRAM_CLK_CNTL_SS_EN |
+		DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
+	SYNC;
+
+	/* timing configuration */
+	im->ddr.timing_cfg_1 =
+		(4 << TIMING_CFG1_PRETOACT_SHIFT) |
+		(7 << TIMING_CFG1_ACTTOPRE_SHIFT) |
+		(4 << TIMING_CFG1_ACTTORW_SHIFT)  |
+		(5 << TIMING_CFG1_REFREC_SHIFT)   |
+		(3 << TIMING_CFG1_WRREC_SHIFT)    |
+		(3 << TIMING_CFG1_ACTTOACT_SHIFT) |
+		(1 << TIMING_CFG1_WRTORD_SHIFT)   |
+		(TIMING_CFG1_CASLAT & TIMING_CASLAT);
+
+	im->ddr.timing_cfg_2 =
+		TIMING_CFG2_CPO_DEF |
+		(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT);
+	SYNC;
+
+	/* don't enable DDR controller yet */
+	im->ddr.sdram_cfg =
+		SDRAM_CFG_SREN |
+		SDRAM_CFG_SDRAM_TYPE_DDR1;
+	SYNC;
+
+	/* Set SDRAM mode */
+	im->ddr.sdram_mode =
+		((DDR_MODE_EXT_MODEREG | DDR_MODE_WEAK) <<
+			SDRAM_MODE_ESD_SHIFT) |
+		((DDR_MODE_MODEREG | DDR_MODE_BLEN_4) <<
+			SDRAM_MODE_SD_SHIFT) |
+		((DDR_MODE_CASLAT << SDRAM_MODE_SD_SHIFT) &
+			MODE_CASLAT);
+	SYNC;
+
+	/* Set fast SDRAM refresh rate */
+	im->ddr.sdram_interval =
+		(DDR_REFINT_166MHZ_7US << SDRAM_INTERVAL_REFINT_SHIFT) |
+		(DDR_BSTOPRE << SDRAM_INTERVAL_BSTOPRE_SHIFT);
+	SYNC;
+
+	/* Workaround for DDR6 Erratum
+	 * see MPC8349E Device Errata Rev.8, 2/2006
+	 * This workaround influences the MPC internal "input enables"
+	 * dependent on CAS latency and MPC revision. According to errata
+	 * sheet the internal reserved registers for this workaround are
+	 * not available from revision 2.0 and up.
+	 */
+
+	/* Get REVID from register SPRIDR. Skip workaround if rev >= 2.0
+	 * (0x200)
+	 */
+	if ((im->sysconf.spridr & SPRIDR_REVID) < 0x200) {
+
+		/* There is a internal reserved register at IMMRBAR+0x2F00
+		 * which has to be written with a certain value defined by
+		 * errata sheet.
+		 */
+		u32 *reserved_p = (u32 *)((u8 *)im + 0x2f00);
+
+#if defined(DDR_CASLAT_20)
+		*reserved_p = 0x201c0000;
+#else
+		*reserved_p = 0x202c0000;
+#endif
+	}
+}