summaryrefslogtreecommitdiff
path: root/board/ti
diff options
context:
space:
mode:
authorRoger Quadros <rogerq@ti.com>2016-08-24 15:35:50 +0300
committerJoe Hershberger <joe.hershberger@ni.com>2016-10-13 12:25:06 -0500
commite607ec993b65462eff960fd5f28016db6b0a61bd (patch)
treebeccd0757835103006011f4fc23ce34c157b5be8 /board/ti
parentab9715303d0b32e9a71dfa9c43d6629f54e2f236 (diff)
downloadu-boot-imx-e607ec993b65462eff960fd5f28016db6b0a61bd.zip
u-boot-imx-e607ec993b65462eff960fd5f28016db6b0a61bd.tar.gz
u-boot-imx-e607ec993b65462eff960fd5f28016db6b0a61bd.tar.bz2
board: am335x-icev2: add ethernet phy mode detection logic
Both ethernet ports can be used as CPSW ethernet (RMII mode) or PRU ethernet (MII mode) by setting the jumper near the port. Read the jumper value and set the pinmux, external mux and PHY clock accordingly. As jumper line is overridden by PHY RX_DV pin immediately after bootstrap (power-up/reset), we have to use GPIO edge detection to capture the jumper line status. As u-boot doesn't provide any infrastructure for GPIO edge detection, we directly access the GPIO registers. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'board/ti')
-rw-r--r--board/ti/am335x/board.c82
1 files changed, 75 insertions, 7 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 0ed16ca..080b9e8 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -47,12 +47,23 @@ DECLARE_GLOBAL_DATA_PTR;
#define GPIO_MUX_MII_CTRL GPIO_TO_PIN(3, 10)
#define GPIO_FET_SWITCH_CTRL GPIO_TO_PIN(0, 7)
#define GPIO_PHY_RESET GPIO_TO_PIN(2, 5)
+#define GPIO_ETH0_MODE GPIO_TO_PIN(0, 11)
+#define GPIO_ETH1_MODE GPIO_TO_PIN(1, 26)
#if defined(CONFIG_SPL_BUILD) || \
(defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_DM_ETH))
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
#endif
+#define GPIO0_RISINGDETECT (AM33XX_GPIO0_BASE + OMAP_GPIO_RISINGDETECT)
+#define GPIO1_RISINGDETECT (AM33XX_GPIO1_BASE + OMAP_GPIO_RISINGDETECT)
+
+#define GPIO0_IRQSTATUS1 (AM33XX_GPIO0_BASE + OMAP_GPIO_IRQSTATUS1)
+#define GPIO1_IRQSTATUS1 (AM33XX_GPIO1_BASE + OMAP_GPIO_IRQSTATUS1)
+
+#define GPIO0_IRQSTATUSRAW (AM33XX_GPIO0_BASE + 0x024)
+#define GPIO1_IRQSTATUSRAW (AM33XX_GPIO1_BASE + 0x024)
+
/*
* Read header information from EEPROM into global structure.
*/
@@ -492,9 +503,9 @@ void sdram_init(void)
}
#endif
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+#if !defined(CONFIG_SPL_BUILD) || \
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
-static void request_and_set_gpio(int gpio, char *name)
+static void request_and_set_gpio(int gpio, char *name, int val)
{
int ret;
@@ -510,7 +521,7 @@ static void request_and_set_gpio(int gpio, char *name)
goto err_free_gpio;
}
- gpio_set_value(gpio, 1);
+ gpio_set_value(gpio, val);
return;
@@ -518,7 +529,8 @@ err_free_gpio:
gpio_free(gpio);
}
-#define REQUEST_AND_SET_GPIO(N) request_and_set_gpio(N, #N);
+#define REQUEST_AND_SET_GPIO(N) request_and_set_gpio(N, #N, 1);
+#define REQUEST_AND_CLR_GPIO(N) request_and_set_gpio(N, #N, 0);
/**
* RMII mode on ICEv2 board needs 50MHz clock. Given the clock
@@ -548,20 +560,76 @@ int board_init(void)
#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
gpmc_init();
#endif
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD))
- int rv;
+#if !defined(CONFIG_SPL_BUILD) || \
+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
if (board_is_icev2()) {
+ int rv;
+ u32 reg;
+
REQUEST_AND_SET_GPIO(GPIO_PR1_MII_CTRL);
- REQUEST_AND_SET_GPIO(GPIO_MUX_MII_CTRL);
+ /* Make J19 status available on GPIO1_26 */
+ REQUEST_AND_CLR_GPIO(GPIO_MUX_MII_CTRL);
+
REQUEST_AND_SET_GPIO(GPIO_FET_SWITCH_CTRL);
+ /*
+ * Both ports can be set as RMII-CPSW or MII-PRU-ETH using
+ * jumpers near the port. Read the jumper value and set
+ * the pinmux, external mux and PHY clock accordingly.
+ * As jumper line is overridden by PHY RX_DV pin immediately
+ * after bootstrap (power-up/reset), we need to sample
+ * it during PHY reset using GPIO rising edge detection.
+ */
REQUEST_AND_SET_GPIO(GPIO_PHY_RESET);
+ /* Enable rising edge IRQ on GPIO0_11 and GPIO 1_26 */
+ reg = readl(GPIO0_RISINGDETECT) | BIT(11);
+ writel(reg, GPIO0_RISINGDETECT);
+ reg = readl(GPIO1_RISINGDETECT) | BIT(26);
+ writel(reg, GPIO1_RISINGDETECT);
+ /* Reset PHYs to capture the Jumper setting */
+ gpio_set_value(GPIO_PHY_RESET, 0);
+ udelay(2); /* PHY datasheet states 1uS min. */
+ gpio_set_value(GPIO_PHY_RESET, 1);
+
+ reg = readl(GPIO0_IRQSTATUSRAW) & BIT(11);
+ if (reg) {
+ writel(reg, GPIO0_IRQSTATUS1); /* clear irq */
+ /* RMII mode */
+ printf("ETH0, CPSW\n");
+ } else {
+ /* MII mode */
+ printf("ETH0, PRU\n");
+ cdce913_data.pdiv3 = 4; /* 25MHz PHY clk */
+ }
+
+ reg = readl(GPIO1_IRQSTATUSRAW) & BIT(26);
+ if (reg) {
+ writel(reg, GPIO1_IRQSTATUS1); /* clear irq */
+ /* RMII mode */
+ printf("ETH1, CPSW\n");
+ gpio_set_value(GPIO_MUX_MII_CTRL, 1);
+ } else {
+ /* MII mode */
+ printf("ETH1, PRU\n");
+ cdce913_data.pdiv2 = 4; /* 25MHz PHY clk */
+ }
+
+ /* disable rising edge IRQs */
+ reg = readl(GPIO0_RISINGDETECT) & ~BIT(11);
+ writel(reg, GPIO0_RISINGDETECT);
+ reg = readl(GPIO1_RISINGDETECT) & ~BIT(26);
+ writel(reg, GPIO1_RISINGDETECT);
rv = setup_clock_synthesizer(&cdce913_data);
if (rv) {
printf("Clock synthesizer setup failed %d\n", rv);
return rv;
}
+
+ /* reset PHYs */
+ gpio_set_value(GPIO_PHY_RESET, 0);
+ udelay(2); /* PHY datasheet states 1uS min. */
+ gpio_set_value(GPIO_PHY_RESET, 1);
}
#endif