board: ti: DRA7: Add DRA72-rev C evm pinmux

Add the pinmux data for rev C evm. This is different from previous
revisions of the platform thanks to the deltas introduced both from
silicon side and from SoC side.

Based on J6EcoES2_EVM_Base_Config-20160309b and PCT-DRA72x-v1.3.0.7 for
SR2.0 silicon.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

2 files changed, 110 insertions, 36 deletions

diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index b646df6..25f2031 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -398,16 +398,29 @@ void set_muxconf_regs(void)
 #ifdef CONFIG_IODELAY_RECALIBRATION
 void recalibrate_iodelay(void)
 {
-	struct pad_conf_entry const *pads;
+	struct pad_conf_entry const *pads, *delta_pads = NULL;
 	struct iodelay_cfg_entry const *iodelay;
-	int npads, niodelays;
+	int npads, niodelays, delta_npads = 0;
+	int ret;
 
 	switch (omap_revision()) {
 	case DRA722_ES1_0:
-		pads = dra72x_core_padconf_array;
-		npads = ARRAY_SIZE(dra72x_core_padconf_array);
-		iodelay = dra72_iodelay_cfg_array;
-		niodelays = ARRAY_SIZE(dra72_iodelay_cfg_array);
+	case DRA722_ES2_0:
+		pads = dra72x_core_padconf_array_common;
+		npads = ARRAY_SIZE(dra72x_core_padconf_array_common);
+		if (board_is_dra72x_revc_or_later()) {
+			delta_pads = dra72x_rgmii_padconf_array_revc;
+			delta_npads =
+				ARRAY_SIZE(dra72x_rgmii_padconf_array_revc);
+			iodelay = dra72_iodelay_cfg_array_revc;
+			niodelays = ARRAY_SIZE(dra72_iodelay_cfg_array_revc);
+		} else {
+			delta_pads = dra72x_rgmii_padconf_array_revb;
+			delta_npads =
+				ARRAY_SIZE(dra72x_rgmii_padconf_array_revb);
+			iodelay = dra72_iodelay_cfg_array_revb;
+			niodelays = ARRAY_SIZE(dra72_iodelay_cfg_array_revb);
+		}
 		break;
 	case DRA752_ES1_0:
 	case DRA752_ES1_1:
@@ -427,7 +440,24 @@ void recalibrate_iodelay(void)
 				      RGMII1_ID_MODE_N_MASK);
 		break;
 	}
-	__recalibrate_iodelay(pads, npads, iodelay, niodelays);
+	/* Setup I/O isolation */
+	ret = __recalibrate_iodelay_start();
+	if (ret)
+		goto err;
+
+	/* Do the muxing here */
+	do_set_mux32((*ctrl)->control_padconf_core_base, pads, npads);
+
+	/* Now do the weird minor deltas that should be safe */
+	if (delta_npads)
+		do_set_mux32((*ctrl)->control_padconf_core_base,
+			     delta_pads, delta_npads);
+
+	/* Setup IOdelay configuration */
+	ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays);
+err:
+	/* Closeup.. remove isolation */
+	__recalibrate_iodelay_end(ret);
 }
 #endif
 
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 6db11a2..34a05dd 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -12,7 +12,7 @@
 
 #include <asm/arch/mux_dra7xx.h>
 
-const struct pad_conf_entry dra72x_core_padconf_array[] = {
+const struct pad_conf_entry dra72x_core_padconf_array_common[] = {
 	{GPMC_AD0, (M3 | PIN_INPUT)},	/* gpmc_ad0.vout3_d0 */
 	{GPMC_AD1, (M3 | PIN_INPUT)},	/* gpmc_ad1.vout3_d1 */
 	{GPMC_AD2, (M3 | PIN_INPUT)},	/* gpmc_ad2.vout3_d2 */
@@ -104,37 +104,11 @@ const struct pad_conf_entry dra72x_core_padconf_array[] = {
 	{VOUT1_D23, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d23.vout1_d23 */
 	{MDIO_MCLK, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mdio_mclk.mdio_mclk */
 	{MDIO_D, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mdio_d.mdio_d */
-	{RGMII0_TXC, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txc.rgmii0_txc */
-	{RGMII0_TXCTL, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txctl.rgmii0_txctl */
-	{RGMII0_TXD3, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txd3.rgmii0_txd3 */
-	{RGMII0_TXD2, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txd2.rgmii0_txd2 */
-	{RGMII0_TXD1, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txd1.rgmii0_txd1 */
-	{RGMII0_TXD0, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txd0.rgmii0_txd0 */
-	{RGMII0_RXC, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxc.rgmii0_rxc */
-	{RGMII0_RXCTL, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxctl.rgmii0_rxctl */
-	{RGMII0_RXD3, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxd3.rgmii0_rxd3 */
-	{RGMII0_RXD2, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxd2.rgmii0_rxd2 */
-	{RGMII0_RXD1, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxd1.rgmii0_rxd1 */
-	{RGMII0_RXD0, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxd0.rgmii0_rxd0 */
-	{VIN2A_D12, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d0.rgmii1_txc */
-	{VIN2A_D13, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d1.rgmii1_txctl */
-	{VIN2A_D14, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d2.rgmii1_txd3 */
-	{VIN2A_D15, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d3.rgmii1_txd2 */
-	{VIN2A_D16, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d4.rgmii1_txd1 */
-	{VIN2A_D17, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d5.rgmii1_txd0 */
-	{VIN2A_D18, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d6.rgmii1_rxc */
-	{VIN2A_D19, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d7.rgmii1_rxctl */
-	{VIN2A_D20, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d8.rgmii1_rxd3 */
-	{VIN2A_D21, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d9.rgmii1_rxd2 */
-	{VIN2A_D22, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d10.rgmii1_rxd1 */
-	{VIN2A_D23, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d11.rgmii1_rxd0 */
 	{USB1_DRVVBUS, (M0 | PIN_INPUT_SLEW)},	/* usb1_drvvbus.usb1_drvvbus */
 	{USB2_DRVVBUS, (M0 | PIN_INPUT_SLEW)},	/* usb2_drvvbus.usb2_drvvbus */
 	{GPIO6_14, (M9 | PIN_INPUT_PULLUP)},	/* gpio6_14.i2c3_sda */
 	{GPIO6_15, (M9 | PIN_INPUT_PULLUP)},	/* gpio6_15.i2c3_scl */
 	{GPIO6_16, (M14 | PIN_INPUT_PULLUP)},	/* gpio6_16.gpio6_16 */
-	{XREF_CLK1, (M5 | PIN_OUTPUT)},	/* xref_clk1.atl_clk1 */
-	{XREF_CLK2, (M5 | PIN_OUTPUT)},	/* xref_clk2.atl_clk2 */
 	{MCASP1_AXR0, (M10 | PIN_INPUT_SLEW)},	/* mcasp1_axr0.i2c5_sda */
 	{MCASP1_AXR1, (M10 | PIN_INPUT_SLEW)},	/* mcasp1_axr1.i2c5_scl */
 	{MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr2.gpio5_4 */
@@ -160,7 +134,6 @@ const struct pad_conf_entry dra72x_core_padconf_array[] = {
 	{MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat3.mmc1_dat3 */
 	{MMC1_SDCD, (M14 | PIN_INPUT_PULLUP)},	/* mmc1_sdcd.gpio6_27 */
 	{MMC1_SDWP, (M14 | PIN_INPUT_SLEW)},	/* mmc1_sdwp.gpio6_28 */
-	{GPIO6_11, (M14 | PIN_INPUT_PULLUP)},	/* gpio6_11.gpio6_11 */
 	{SPI1_SCLK, (M0 | PIN_INPUT_PULLDOWN)},	/* spi1_sclk.spi1_sclk */
 	{SPI1_D1, (M0 | PIN_INPUT_PULLDOWN)},	/* spi1_d1.spi1_d1 */
 	{SPI1_D0, (M0 | PIN_INPUT_PULLDOWN)},	/* spi1_d0.spi1_d0 */
@@ -188,6 +161,65 @@ const struct pad_conf_entry dra72x_core_padconf_array[] = {
 	{WAKEUP3, (M1 | PULL_ENA | PULL_UP)},	/* Wakeup3.sys_nirq1 */
 };
 
+const struct pad_conf_entry dra72x_rgmii_padconf_array_revb[] = {
+	{GPIO6_11, (M14 | PIN_INPUT_PULLUP)},	/* gpio6_11.gpio6_11 */
+	{RGMII0_TXC, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txc.rgmii0_txc */
+	{RGMII0_TXCTL, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txctl.rgmii0_txctl */
+	{RGMII0_TXD3, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txd3.rgmii0_txd3 */
+	{RGMII0_TXD2, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txd2.rgmii0_txd2 */
+	{RGMII0_TXD1, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txd1.rgmii0_txd1 */
+	{RGMII0_TXD0, (M0 | PIN_OUTPUT | MANUAL_MODE)},	/* rgmii0_txd0.rgmii0_txd0 */
+	{RGMII0_RXC, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxc.rgmii0_rxc */
+	{RGMII0_RXCTL, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxctl.rgmii0_rxctl */
+	{RGMII0_RXD3, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxd3.rgmii0_rxd3 */
+	{RGMII0_RXD2, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxd2.rgmii0_rxd2 */
+	{RGMII0_RXD1, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxd1.rgmii0_rxd1 */
+	{RGMII0_RXD0, (M0 | PIN_INPUT | MANUAL_MODE)},	/* rgmii0_rxd0.rgmii0_rxd0 */
+	{VIN2A_D12, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d0.rgmii1_txc */
+	{VIN2A_D13, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d1.rgmii1_txctl */
+	{VIN2A_D14, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d2.rgmii1_txd3 */
+	{VIN2A_D15, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d3.rgmii1_txd2 */
+	{VIN2A_D16, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d4.rgmii1_txd1 */
+	{VIN2A_D17, (M3 | PIN_OUTPUT | MANUAL_MODE)},	/* vin2a_d5.rgmii1_txd0 */
+	{VIN2A_D18, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d6.rgmii1_rxc */
+	{VIN2A_D19, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d7.rgmii1_rxctl */
+	{VIN2A_D20, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d8.rgmii1_rxd3 */
+	{VIN2A_D21, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d9.rgmii1_rxd2 */
+	{VIN2A_D22, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d10.rgmii1_rxd1 */
+	{VIN2A_D23, (M3 | PIN_INPUT | MANUAL_MODE)},	/* vin2a_d11.rgmii1_rxd0 */
+	{XREF_CLK1, (M5 | PIN_OUTPUT)},	/* xref_clk1.atl_clk1 */
+	{XREF_CLK2, (M5 | PIN_OUTPUT)},	/* xref_clk2.atl_clk2 */
+};
+
+const struct pad_conf_entry dra72x_rgmii_padconf_array_revc[] = {
+	{VIN2A_FLD0, (M14 | PIN_INPUT)},	/* vin2a_fld0.gpio3_30 */
+	{RGMII0_TXC, (M0 | PIN_OUTPUT)},	/* rgmii0_txc.rgmii0_txc */
+	{RGMII0_TXCTL, (M0 | PIN_OUTPUT)},	/* rgmii0_txctl.rgmii0_txctl */
+	{RGMII0_TXD3, (M0 | PIN_OUTPUT)},	/* rgmii0_txd3.rgmii0_txd3 */
+	{RGMII0_TXD2, (M0 | PIN_OUTPUT)},	/* rgmii0_txd2.rgmii0_txd2 */
+	{RGMII0_TXD1, (M0 | PIN_OUTPUT)},	/* rgmii0_txd1.rgmii0_txd1 */
+	{RGMII0_TXD0, (M0 | PIN_OUTPUT)},	/* rgmii0_txd0.rgmii0_txd0 */
+	{RGMII0_RXC, (M0 | PIN_INPUT_PULLDOWN)},	/* rgmii0_rxc.rgmii0_rxc */
+	{RGMII0_RXCTL, (M0 | PIN_INPUT_PULLDOWN)},	/* rgmii0_rxctl.rgmii0_rxctl */
+	{RGMII0_RXD3, (M0 | PIN_INPUT_PULLDOWN)},	/* rgmii0_rxd3.rgmii0_rxd3 */
+	{RGMII0_RXD2, (M0 | PIN_INPUT_PULLDOWN)},	/* rgmii0_rxd2.rgmii0_rxd2 */
+	{RGMII0_RXD1, (M0 | PIN_INPUT_PULLDOWN)},	/* rgmii0_rxd1.rgmii0_rxd1 */
+	{RGMII0_RXD0, (M0 | PIN_INPUT_PULLDOWN)},	/* rgmii0_rxd0.rgmii0_rxd0 */
+	{VIN2A_D12, (M3 | PIN_OUTPUT)},	/* vin2a_d12.rgmii1_txc */
+	{VIN2A_D13, (M3 | PIN_OUTPUT)},	/* vin2a_d13.rgmii1_txctl */
+	{VIN2A_D14, (M3 | PIN_OUTPUT)},	/* vin2a_d14.rgmii1_txd3 */
+	{VIN2A_D15, (M3 | PIN_OUTPUT)},	/* vin2a_d15.rgmii1_txd2 */
+	{VIN2A_D16, (M3 | PIN_OUTPUT)},	/* vin2a_d16.rgmii1_txd1 */
+	{VIN2A_D17, (M3 | PIN_OUTPUT)},	/* vin2a_d17.rgmii1_txd0 */
+	{VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN)},	/* vin2a_d18.rgmii1_rxc */
+	{VIN2A_D19, (M3 | PIN_INPUT_PULLDOWN)},	/* vin2a_d19.rgmii1_rxctl */
+	{VIN2A_D20, (M3 | PIN_INPUT_PULLDOWN)},	/* vin2a_d20.rgmii1_rxd3 */
+	{VIN2A_D21, (M3 | PIN_INPUT_PULLDOWN)},	/* vin2a_d21.rgmii1_rxd2 */
+	{VIN2A_D22, (M3 | PIN_INPUT_PULLDOWN)},	/* vin2a_d22.rgmii1_rxd1 */
+	{VIN2A_D23, (M3 | PIN_INPUT_PULLDOWN)},	/* vin2a_d23.rgmii1_rxd0 */
+	{XREF_CLK2, (M5 | PIN_INPUT_PULLDOWN)},	/* xref_clk2.atl_clk2 */
+};
+
 const struct pad_conf_entry early_padconf[] = {
 #if (CONFIG_CONS_INDEX == 1)
 	{UART1_RXD, (PIN_INPUT_SLEW | M0)}, /* UART1_RXD */
@@ -201,7 +233,7 @@ const struct pad_conf_entry early_padconf[] = {
 };
 
 #ifdef CONFIG_IODELAY_RECALIBRATION
-const struct iodelay_cfg_entry dra72_iodelay_cfg_array[] = {
+const struct iodelay_cfg_entry dra72_iodelay_cfg_array_revb[] = {
 	{0x6F0, 359, 0}, /* RGMMI0_RXC_IN */
 	{0x6FC, 129, 1896}, /* RGMMI0_RXCTL_IN */
 	{0x708, 80, 1391}, /* RGMMI0_RXD0_IN */
@@ -236,6 +268,18 @@ const struct iodelay_cfg_entry dra72_iodelay_cfg_array[] = {
 	{0x188, 0, 0}, /* CFG_GPMC_A18_OUT */
 	{0x374, 121, 0}, /* CFG_GPMC_CS2_OUT */
 };
+
+const struct iodelay_cfg_entry dra72_iodelay_cfg_array_revc[] = {
+	{0x0144, 0, 0},	/* CFG_GPMC_A13_IN */
+	{0x0150, 2247, 1186},	/* CFG_GPMC_A14_IN */
+	{0x015C, 2176, 1197},	/* CFG_GPMC_A15_IN */
+	{0x0168, 2229, 1268},	/* CFG_GPMC_A16_IN */
+	{0x0170, 0, 0},	/* CFG_GPMC_A16_OUT */
+	{0x0174, 2251, 1217},	/* CFG_GPMC_A17_IN */
+	{0x0188, 0, 0},	/* CFG_GPMC_A18_OUT */
+	{0x0374, 0, 0},	/* CFG_GPMC_CS2_OUT */
+};
+
 #endif
 
 const struct pad_conf_entry dra74x_core_padconf_array[] = {