summaryrefslogtreecommitdiff
path: root/board/ti
diff options
context:
space:
mode:
authorAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-01-08 13:15:45 +0100
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-01-08 13:15:45 +0100
commit79f38777947ac7685e2cef8bd977f954ab198c0e (patch)
tree6fe053ef751b1c424ec50be338844197b6421d74 /board/ti
parent96764df1b47ddebfb50fadf5af72530b07b5fc89 (diff)
parent9bd5c1ad0db802c9f8d49d72b443f03431cf6a89 (diff)
downloadu-boot-imx-79f38777947ac7685e2cef8bd977f954ab198c0e.zip
u-boot-imx-79f38777947ac7685e2cef8bd977f954ab198c0e.tar.gz
u-boot-imx-79f38777947ac7685e2cef8bd977f954ab198c0e.tar.bz2
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
This required manual merging drivers/mtd/nand/Makefile and adding am335x_evm support for CONFIG_SPL_NAND_DRIVERS
Diffstat (limited to 'board/ti')
-rw-r--r--board/ti/am335x/board.c4
-rw-r--r--board/ti/am335x/mux.c22
-rw-r--r--board/ti/beagle/beagle.c53
-rw-r--r--board/ti/evm/evm.c19
4 files changed, 60 insertions, 38 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index f0eca54..ed4229e 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -44,7 +44,7 @@ static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
/* MII mode defines */
#define MII_MODE_ENABLE 0x0
-#define RGMII_MODE_ENABLE 0xA
+#define RGMII_MODE_ENABLE 0x3A
/* GPIO that controls power to DDR on EVM-SK */
#define GPIO_DDR_VTT_EN 7
@@ -318,6 +318,8 @@ int board_init(void)
gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ gpmc_init();
+
return 0;
}
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 8437ef5..0283708 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -171,6 +171,25 @@ static struct module_pin_mux mii1_pin_mux[] = {
{-1},
};
+static struct module_pin_mux nand_pin_mux[] = {
+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
+ {-1},
+};
+
void enable_uart0_pin_mux(void)
{
configure_module_pin_mux(uart0_pin_mux);
@@ -257,6 +276,9 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
/* In profile #2 i2c1 and spi0 conflict. */
if (profile & ~PROFILE_2)
configure_module_pin_mux(i2c1_pin_mux);
+ /* Profiles 2 & 3 don't have NAND */
+ if (profile & ~(PROFILE_2 | PROFILE_3))
+ configure_module_pin_mux(nand_pin_mux);
else if (profile == PROFILE_2) {
configure_module_pin_mux(mmc1_pin_mux);
configure_module_pin_mux(spi0_pin_mux);
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index f20ebed..b829a79 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -144,8 +144,7 @@ static int get_board_revision(void)
* Description: If we use SPL then there is no x-loader nor config header
* so we have to setup the DDR timings ourself on both banks.
*/
-void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
- u32 *mr)
+void get_board_mem_timings(struct board_sdrc_timings *timings)
{
int pop_mfr, pop_id;
@@ -156,29 +155,29 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
*/
identify_nand_chip(&pop_mfr, &pop_id);
- *mr = MICRON_V_MR_165;
+ timings->mr = MICRON_V_MR_165;
switch (get_board_revision()) {
case REVISION_C4:
if (pop_mfr == NAND_MFR_STMICRO && pop_id == 0xba) {
/* 512MB DDR */
- *mcfg = NUMONYX_V_MCFG_165(512 << 20);
- *ctrla = NUMONYX_V_ACTIMA_165;
- *ctrlb = NUMONYX_V_ACTIMB_165;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ timings->mcfg = NUMONYX_V_MCFG_165(512 << 20);
+ timings->ctrla = NUMONYX_V_ACTIMA_165;
+ timings->ctrlb = NUMONYX_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
break;
} else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xba) {
/* Beagleboard Rev C4, 512MB Nand/256MB DDR*/
- *mcfg = MICRON_V_MCFG_165(128 << 20);
- *ctrla = MICRON_V_ACTIMA_165;
- *ctrlb = MICRON_V_ACTIMB_165;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ timings->mcfg = MICRON_V_MCFG_165(128 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_165;
+ timings->ctrlb = MICRON_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
break;
} else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xbc) {
/* Beagleboard Rev C5, 256MB DDR */
- *mcfg = MICRON_V_MCFG_200(256 << 20);
- *ctrla = MICRON_V_ACTIMA_200;
- *ctrlb = MICRON_V_ACTIMB_200;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ timings->mcfg = MICRON_V_MCFG_200(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_200;
+ timings->ctrlb = MICRON_V_ACTIMB_200;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
break;
}
case REVISION_XM_A:
@@ -186,24 +185,24 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
case REVISION_XM_C:
if (pop_mfr == 0) {
/* 256MB DDR */
- *mcfg = MICRON_V_MCFG_200(256 << 20);
- *ctrla = MICRON_V_ACTIMA_200;
- *ctrlb = MICRON_V_ACTIMB_200;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ timings->mcfg = MICRON_V_MCFG_200(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_200;
+ timings->ctrlb = MICRON_V_ACTIMB_200;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
} else {
/* 512MB DDR */
- *mcfg = NUMONYX_V_MCFG_165(512 << 20);
- *ctrla = NUMONYX_V_ACTIMA_165;
- *ctrlb = NUMONYX_V_ACTIMB_165;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ timings->mcfg = NUMONYX_V_MCFG_165(512 << 20);
+ timings->ctrla = NUMONYX_V_ACTIMA_165;
+ timings->ctrlb = NUMONYX_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
}
break;
default:
/* Assume 128MB and Micron/165MHz timings to be safe */
- *mcfg = MICRON_V_MCFG_165(128 << 20);
- *ctrla = MICRON_V_ACTIMA_165;
- *ctrlb = MICRON_V_ACTIMB_165;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ timings->mcfg = MICRON_V_MCFG_165(128 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_165;
+ timings->ctrlb = MICRON_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
}
}
#endif
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 61fc7b5..8a3aa0c 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -128,8 +128,7 @@ int board_init(void)
* provides the timing values back to the function that configures
* the memory.
*/
-void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
- u32 *mr)
+void get_board_mem_timings(struct board_sdrc_timings *timings)
{
int pop_mfr, pop_id;
@@ -142,17 +141,17 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
if (pop_mfr == NAND_MFR_HYNIX && pop_id == 0xbc) {
/* 256MB DDR */
- *mcfg = HYNIX_V_MCFG_200(256 << 20);
- *ctrla = HYNIX_V_ACTIMA_200;
- *ctrlb = HYNIX_V_ACTIMB_200;
+ timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
+ timings->ctrla = HYNIX_V_ACTIMA_200;
+ timings->ctrlb = HYNIX_V_ACTIMB_200;
} else {
/* 128MB DDR */
- *mcfg = MICRON_V_MCFG_165(128 << 20);
- *ctrla = MICRON_V_ACTIMA_165;
- *ctrlb = MICRON_V_ACTIMB_165;
+ timings->mcfg = MICRON_V_MCFG_165(128 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_165;
+ timings->ctrlb = MICRON_V_ACTIMB_165;
}
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
- *mr = MICRON_V_MR_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ timings->mr = MICRON_V_MR_165;
}
#endif