summaryrefslogtreecommitdiff
path: root/board/ti
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2012-07-30 16:13:10 -0700
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-09-01 14:58:13 +0200
commit973b663820382c9d02bc6042a5901f3f74640c17 (patch)
tree815ca40f1c18c175ddb70010a1978f7ac9946302 /board/ti
parentd4898ea89684aa285cfb34fbab6831c28dc0ed33 (diff)
downloadu-boot-imx-973b663820382c9d02bc6042a5901f3f74640c17.zip
u-boot-imx-973b663820382c9d02bc6042a5901f3f74640c17.tar.gz
u-boot-imx-973b663820382c9d02bc6042a5901f3f74640c17.tar.bz2
am33xx: Remove board/ti/am335x/evm.c
The intention has always been (and boards are to support) an i2c EEPROM that will identify what hardware they are, allowing a single binary to support multiple boards. As such, remove the 'evm.c' file as there is nothing EVM centric in it currently, only SoC peripheral configuration. Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'board/ti')
-rw-r--r--board/ti/am335x/Makefile2
-rw-r--r--board/ti/am335x/evm.c199
2 files changed, 1 insertions, 200 deletions
diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
index d58b185..e3609bc 100644
--- a/board/ti/am335x/Makefile
+++ b/board/ti/am335x/Makefile
@@ -18,7 +18,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := evm.o mux.o
+COBJS := mux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/ti/am335x/evm.c b/board/ti/am335x/evm.c
deleted file mode 100644
index b7eee80..0000000
--- a/board/ti/am335x/evm.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * evm.c
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/common_def.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-/* MII mode defines */
-#define MII_MODE_ENABLE 0x0
-#define RGMII_MODE_ENABLE 0xA
-
-struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-/*
- * I2C Address of on-board EEPROM
- */
-#define I2C_BASE_BOARD_ADDR 0x50
-
-#define NO_OF_MAC_ADDR 3
-#define ETH_ALEN 6
-
-#define NAME_LEN 8
-
-struct am335x_baseboard_id {
- unsigned int magic;
- char name[NAME_LEN];
- char version[4];
- char serial[12];
- char config[32];
- char mac_addr[NO_OF_MAC_ADDR][ETH_ALEN];
-};
-
-static struct am335x_baseboard_id header;
-
-static inline int board_is_bone(void)
-{
- return !strncmp(header.name, "A335BONE", NAME_LEN);
-}
-
-/*
- * Read header information from EEPROM into global structure.
- */
-int read_eeprom(void)
-{
- /* Check if baseboard eeprom is available */
- if (i2c_probe(I2C_BASE_BOARD_ADDR)) {
- printf("Could not probe the EEPROM; something fundamentally "
- "wrong on the I2C bus.\n");
- return -ENODEV;
- }
-
- /* read the eeprom using i2c */
- if (i2c_read(I2C_BASE_BOARD_ADDR, 0, 2, (uchar *)&header,
- sizeof(header))) {
- printf("Could not read the EEPROM; something fundamentally"
- " wrong on the I2C bus.\n");
- return -EIO;
- }
-
- if (header.magic != 0xEE3355AA) {
- /*
- * read the eeprom using i2c again,
- * but use only a 1 byte address
- */
- if (i2c_read(I2C_BASE_BOARD_ADDR, 0, 1, (uchar *)&header,
- sizeof(header))) {
- printf("Could not read the EEPROM; something "
- "fundamentally wrong on the I2C bus.\n");
- return -EIO;
- }
-
- if (header.magic != 0xEE3355AA) {
- printf("Incorrect magic number in EEPROM\n");
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-/*
- * Basic board specific setup
- */
-int board_init(void)
-{
- enable_uart0_pin_mux();
-
- enable_i2c0_pin_mux();
- enable_i2c1_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- if (read_eeprom() < 0)
- printf("Could not get board ID.\n");
-
- gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
-
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-static void cpsw_control(int enabled)
-{
- /* VTP can be added here */
-
- return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
- {
- .slave_reg_ofs = 0x208,
- .sliver_reg_ofs = 0xd80,
- .phy_id = 0,
- },
- {
- .slave_reg_ofs = 0x308,
- .sliver_reg_ofs = 0xdc0,
- .phy_id = 1,
- },
-};
-
-static struct cpsw_platform_data cpsw_data = {
- .mdio_base = AM335X_CPSW_MDIO_BASE,
- .cpsw_base = AM335X_CPSW_BASE,
- .mdio_div = 0xff,
- .channels = 8,
- .cpdma_reg_ofs = 0x800,
- .slaves = 1,
- .slave_data = cpsw_slaves,
- .ale_reg_ofs = 0xd00,
- .ale_entries = 1024,
- .host_port_reg_ofs = 0x108,
- .hw_stats_reg_ofs = 0x900,
- .mac_control = (1 << 5),
- .control = cpsw_control,
- .host_port_num = 0,
- .version = CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
- uint8_t mac_addr[6];
- uint32_t mac_hi, mac_lo;
-
- if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
- debug("<ethaddr> not set. Reading from E-fuse\n");
- /* try reading mac address from efuse */
- mac_lo = readl(&cdev->macid0l);
- mac_hi = readl(&cdev->macid0h);
- mac_addr[0] = mac_hi & 0xFF;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
- mac_addr[4] = mac_lo & 0xFF;
- mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
- if (is_valid_ether_addr(mac_addr))
- eth_setenv_enetaddr("ethaddr", mac_addr);
- else
- return -1;
- }
-
- if (board_is_bone()) {
- enable_mii1_pin_mux();
- writel(MII_MODE_ENABLE, &cdev->miisel);
- cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
- PHY_INTERFACE_MODE_MII;
- } else {
- enable_rgmii1_pin_mux();
- writel(RGMII_MODE_ENABLE, &cdev->miisel);
- cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
- PHY_INTERFACE_MODE_RGMII;
- }
-
- return cpsw_register(&cpsw_data);
-}
-#endif