summaryrefslogtreecommitdiff
path: root/board/ti
diff options
context:
space:
mode:
authorSteve Kipisz <s-kipisz2@ti.com>2013-08-14 10:51:31 -0400
committerTom Rini <trini@ti.com>2013-09-20 16:57:40 -0400
commit52f7d8442e0837ef00f848865286e301a5f0f78f (patch)
treea2570797365eb04c3193cea5bf41d1aadf1e9331 /board/ti
parent9721027aae63aab072de6ee8eae68d8e684b3af3 (diff)
downloadu-boot-imx-52f7d8442e0837ef00f848865286e301a5f0f78f.zip
u-boot-imx-52f7d8442e0837ef00f848865286e301a5f0f78f.tar.gz
u-boot-imx-52f7d8442e0837ef00f848865286e301a5f0f78f.tar.bz2
am335x:Handle worst case scenario for Errata 1.0.24
In Errata 1.0.24, if the board is running at OPP50 and has a warm reset, the boot ROM sets the frequencies for OPP100. This patch attempts to drop the frequencies back to OPP50 as soon as possible in the SPL. Then later the voltages and frequencies up set higher. Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> [trini: Adapt to current framework] Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'board/ti')
-rw-r--r--board/ti/am335x/board.c24
1 files changed, 18 insertions, 6 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 6135f07..c2fc5a6 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -249,14 +249,13 @@ const struct dpll_params dpll_ddr_bone_black = {
void am33xx_spl_board_init(void)
{
struct am335x_baseboard_id header;
- struct dpll_params dpll_mpu = {0, OSC-1, 1, -1, -1, -1, -1};
int mpu_vdd;
if (read_eeprom(&header) < 0)
puts("Could not get board ID.\n");
/* Get the frequency */
- dpll_mpu.m = am335x_get_efuse_mpu_max_freq(cdev);
+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
if (board_is_bone(&header) || board_is_bone_lt(&header)) {
/* BeagleBone PMIC Code */
@@ -293,13 +292,13 @@ void am33xx_spl_board_init(void)
* a Beaglebone Black it supports 1GHz.
*/
if (board_is_bone_lt(&header))
- dpll_mpu.m = MPUPLL_M_1000;
+ dpll_mpu_opp100.m = MPUPLL_M_1000;
/*
* Increase USB current limit to 1300mA or 1800mA and set
* the MPU voltage controller as needed.
*/
- if (dpll_mpu.m == MPUPLL_M_1000) {
+ if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
} else {
@@ -313,6 +312,15 @@ void am33xx_spl_board_init(void)
TPS65217_USB_INPUT_CUR_LIMIT_MASK))
puts("tps65217_reg_write failure\n");
+ /* Set DCDC3 (CORE) voltage to 1.125V */
+ if (tps65217_voltage_update(TPS65217_DEFDCDC3,
+ TPS65217_DCDC_VOLT_SEL_1125MV)) {
+ puts("tps65217_voltage_update failure\n");
+ return;
+ }
+
+ /* Set CORE Frequencies to OPP100 */
+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
/* Set DCDC2 (MPU) voltage */
if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
@@ -360,7 +368,8 @@ void am33xx_spl_board_init(void)
* VDD to drive at that speed.
*/
sil_rev = readl(&cdev->deviceid) >> 28;
- mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev, dpll_mpu.m);
+ mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev,
+ dpll_mpu_opp100.m);
/* Tell the TPS65910 to use i2c */
tps65910_set_i2c_control();
@@ -372,10 +381,13 @@ void am33xx_spl_board_init(void)
/* Second, update the CORE voltage. */
if (tps65910_voltage_update(CORE, TPS65910_OP_REG_SEL_1_1_3))
return;
+
+ /* Set CORE Frequencies to OPP100 */
+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
}
/* Set MPU Frequency to what we detected now that voltages are set */
- do_setup_dpll(&dpll_mpu_regs, &dpll_mpu);
+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
}
const struct dpll_params *get_dpll_ddr_params(void)