Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  arm, davinci: add DAVINCI_MMC_CLKID
  arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
  arm, davinci: da850/dm365 lowlevel cleanup
  omap5: Add omap5_evm board build support.
  omap4/5: Add support for booting with CH.
  omap5: emif: Add emif/ddr configurations required for omap5 evm
  omap5: clocks: Add clocks support for omap5 platform.
  omap5: Add minimal support for omap5430.
  omap: Checkpatch fixes
  omap4: make omap4 code common for future reuse
  GCC4.6: Squash warnings in onenand_base.c
  GCC4.6: Fix common/usb.c on xscale
  OneNAND: Add simple OneNAND SPL
  PXA: vpac270: Enable the new generic MMC driver
  PXA: Cleanup serial_pxa
  PXA: Drop csb226 and innokom boards (unmaintained)
  m28evk: Fix comment about the number of RAM banks
  mx31: Fix checkpatch warnings in generic.c
  mx31: Use proper IO accessor for GPR register
  mx31: Remove duplicate definition for GPR register
  qong: Use generic function for configuring GPR register
  M28EVK: Enable USB HOST support
  iMX28: Add USB HOST driver
  iMX28: Add USB and USB PHY register definitions
  M28: Add memory detection into SPL
  iMX28: Fix ARM vector handling
  M28: Add doc/README.m28 documentation
  M28: Add MMC SPL
  iMX28: Add support for DENX M28EVK board
  iMX28: Add u-boot.sb target to Makefile
  iMX28: Add image header generator tool
  iMX28: Add driver for internal RTC
  iMX28: Add GPMI NAND driver
  iMX28: Add APBH DMA driver
  iMX28: Add SPI driver
  iMX28: Add GPIO control
  iMX28: Add I2C bus driver
  iMX28: Add PINMUX control
  FEC: Add support for iMX28 quirks
  iMX28: Add SSP MMC driver
  iMX28: Initial support for iMX28 CPU
  MX25: zmx25: GCC4.6 fix build warnings
  da850: add new config file for AM18xx
  BeagleBoard: config: Switch to ttyO2
  OMAP3: Change omap3_evm maintainer
  devkit8000: Fix NAND SPL on boards with 256MB NAND
  integrator: enable Vpp and disable flash protection
  integrator: add system controller header
  integrator: make flash writeable on boot
  integrator: use io-accessors for board init
  integrator: move text offset to config
  integrator: pass configs for core modules
  ARM: remove superfluous setting of arch_number in board specific code.
  SPL: Allow ARM926EJS to avoid compiling in the CPU support code
  integrator: do not test first part of the memory
  arm: a320: fix broken timer
  ARM: define CONFIG_MACH_TYPE for all ronetix boards
  dm646x: pass board revision info to kernel
  dm646x: add new configuration for dm6467T
  arm, davinci: Fix setting of the SDRAM configuration register
  arm, davinci: Remove the duplication of LPSC functions
  arm, davinci: Rename AM1808 lowlevel functions to DA850
  da8xxevm: fix build error
  ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE

3 files changed, 81 insertions, 3 deletions

diff --git a/board/ti/sdp4430/Makefile b/board/ti/sdp4430/Makefile
index 806fdf4..72ad3eb 100644
--- a/board/ti/sdp4430/Makefile
+++ b/board/ti/sdp4430/Makefile
@@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
+COBJS	:= sdp.o
+
 ifndef CONFIG_SPL_BUILD
-COBJS	:= sdp.o cmd_bat.o
+COBJS	+= cmd_bat.o
 endif
 
 SRCS	:= $(COBJS:.o=.c)
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index a5ea682..e1b853c 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -70,6 +70,23 @@ int misc_init_r(void)
 	return 0;
 }
 
+void set_muxconf_regs_essential(void)
+{
+	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+		   sizeof(core_padconf_array_essential) /
+		   sizeof(struct pad_conf_entry));
+
+	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+		   sizeof(wkup_padconf_array_essential) /
+		   sizeof(struct pad_conf_entry));
+
+	if (omap_revision() >= OMAP4460_ES1_0)
+		do_set_mux(CONTROL_PADCONF_WKUP,
+				 wkup_padconf_array_essential_4460,
+				 sizeof(wkup_padconf_array_essential_4460) /
+				 sizeof(struct pad_conf_entry));
+}
+
 void set_muxconf_regs_non_essential(void)
 {
 	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
@@ -81,7 +98,7 @@ void set_muxconf_regs_non_essential(void)
 		   sizeof(struct pad_conf_entry));
 }
 
-#ifdef CONFIG_GENERIC_MMC
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
 int board_mmc_init(bd_t *bis)
 {
 	omap_mmc_init(0);
@@ -89,3 +106,11 @@ int board_mmc_init(bd_t *bis)
 	return 0;
 }
 #endif
+
+/*
+ * get_board_rev() - get board revision
+ */
+u32 get_board_rev(void)
+{
+	return 0x20;
+}
diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h
index 06efaea..1c6e0ee 100644
--- a/board/ti/sdp4430/sdp4430_mux_data.h
+++ b/board/ti/sdp4430/sdp4430_mux_data.h
@@ -28,6 +28,49 @@
 
 #include <asm/arch/mux_omap4.h>
 
+const struct pad_conf_entry core_padconf_array_essential[] = {
+
+{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
+{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
+{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
+{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
+{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
+{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
+{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
+{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)},	 /* sdmmc2_clk */
+{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
+{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)},	 /* sdmmc1_clk */
+{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
+{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
+{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
+{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
+{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
+{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
+{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
+{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
+{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
+{UART3_CTS_RCTX, (PTU | IEN | M0)},			/* uart3_tx */
+{UART3_RTS_SD, (M0)},					/* uart3_rts_sd */
+{UART3_RX_IRRX, (IEN | M0)},				/* uart3_rx */
+{UART3_TX_IRTX, (M0)}					/* uart3_tx */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential[] = {
+
+{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+{PAD1_SYS_32K, (IEN | M0)}	 /* sys_32k */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
+
+{PAD1_FREF_CLK4_REQ, (M3)},	 /* gpio_wk7, TPS */
+
+};
+
 const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* gpio_32 */
 	{GPMC_AD9, (PTU | IEN | M3)},					/* gpio_33 */
@@ -200,6 +243,15 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{DPM_EMU17, (IEN | M5)},					/* dispc2_data2 */
 	{DPM_EMU18, (IEN | M5)},					/* dispc2_data1 */
 	{DPM_EMU19, (IEN | M5)},					/* dispc2_data0 */
+	{I2C1_SCL, (PTU | IEN | M0)},					/* i2c1_scl */
+	{I2C1_SDA, (PTU | IEN | M0)},					/* i2c1_sda */
+	{I2C2_SCL, (PTU | IEN | M0)},					/* i2c2_scl */
+	{I2C2_SDA, (PTU | IEN | M0)},					/* i2c2_sda */
+	{I2C3_SCL, (PTU | IEN | M0)},					/* i2c3_scl */
+	{I2C3_SDA, (PTU | IEN | M0)},					/* i2c3_sda */
+	{I2C4_SCL, (PTU | IEN | M0)},					/* i2c4_scl */
+	{I2C4_SDA, (PTU | IEN | M0)}					/* i2c4_sda */
+
 };
 
 const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
@@ -214,7 +266,6 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
 	{PAD0_FREF_CLK0_OUT, (M2)},		/* sys_drm_msecure */
 	{PAD1_FREF_CLK3_REQ, (M3)},		/* gpio_wk30 - Debug led-1 */
 	{PAD0_FREF_CLK3_OUT, (M0)},		/* fref_clk3_out */
-	{PAD1_FREF_CLK4_REQ, (M3)},		/* gpio_wk7 - Debug led-2 */
 	{PAD0_FREF_CLK4_OUT, (M3)},		/* gpio_wk8 - Debug led-3 */
 	{PAD0_SYS_NRESPWRON, (M0)},		/* sys_nrespwron */
 	{PAD1_SYS_NRESWARM, (M0)},		/* sys_nreswarm */