diff options
| author | Marek Vasut <marex@denx.de> | 2015-12-05 17:55:54 +0100 |
|---|---|---|
| committer | Marek Vasut <marex@denx.de> | 2015-12-20 03:36:50 +0100 |
| commit | 1f5f18717254d6d0c0758580980ff096a8587b9d (patch) | |
| tree | ebb80e2105826f84e00fbda38769cda5ab0f5446 /board/terasic | |
| parent | 5df93c556445940a5e96e511d11497db382a409a (diff) | |
| download | u-boot-imx-1f5f18717254d6d0c0758580980ff096a8587b9d.zip u-boot-imx-1f5f18717254d6d0c0758580980ff096a8587b9d.tar.gz u-boot-imx-1f5f18717254d6d0c0758580980ff096a8587b9d.tar.bz2 | |
arm: socfpga: sockit: Remove Micrel PHY configuration
The Micrel PHY configuration is now done from OF, so hard-coding
the configuration into the board file is no longer necessary.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Diffstat (limited to 'board/terasic')
| -rw-r--r-- | board/terasic/sockit/socfpga.c | 40 |
1 files changed, 0 insertions, 40 deletions
diff --git a/board/terasic/sockit/socfpga.c b/board/terasic/sockit/socfpga.c index 0fbbc34..ccb1b4b 100644 --- a/board/terasic/sockit/socfpga.c +++ b/board/terasic/sockit/socfpga.c @@ -12,10 +12,6 @@ #include <usb/dwc2_udc.h> #include <usb_mass_storage.h> -#include <micrel.h> -#include <netdev.h> -#include <phy.h> - DECLARE_GLOBAL_DATA_PTR; void s_init(void) {} @@ -31,42 +27,6 @@ int board_init(void) return 0; } -/* - * PHY configuration - */ -#ifdef CONFIG_PHY_MICREL_KSZ9021 -int board_phy_config(struct phy_device *phydev) -{ - int ret; - /* - * These skew settings for the KSZ9021 ethernet phy is required for ethernet - * to work reliably on most flavors of cyclone5 boards. - */ - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, - 0xf0f0); - if (ret) - return ret; - - if (phydev->drv->config) - return phydev->drv->config(phydev); - - return 0; -} -#endif - #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, |