ARM: remove jadecpu board support

This is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Matthias Weisser <weisserm@arcor.de>
Acked-by: Marek Vasut <marex@denx.de>

5 files changed, 0 insertions, 443 deletions

diff --git a/board/syteco/jadecpu/Kconfig b/board/syteco/jadecpu/Kconfig
deleted file mode 100644
index 6e9392e..0000000
--- a/board/syteco/jadecpu/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_JADECPU
-
-config SYS_BOARD
-	default "jadecpu"
-
-config SYS_VENDOR
-	default "syteco"
-
-config SYS_SOC
-	default "mb86r0x"
-
-config SYS_CONFIG_NAME
-	default "jadecpu"
-
-endif
diff --git a/board/syteco/jadecpu/MAINTAINERS b/board/syteco/jadecpu/MAINTAINERS
deleted file mode 100644
index b53e7ca..0000000
--- a/board/syteco/jadecpu/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-JADECPU BOARD
-M:	Matthias Weisser <weisserm@arcor.de>
-S:	Maintained
-F:	board/syteco/jadecpu/
-F:	include/configs/jadecpu.h
-F:	configs/jadecpu_defconfig
diff --git a/board/syteco/jadecpu/Makefile b/board/syteco/jadecpu/Makefile
deleted file mode 100644
index 7426436..0000000
--- a/board/syteco/jadecpu/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= jadecpu.o
-obj-y	+= lowlevel_init.o
diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c
deleted file mode 100644
index 6c60a41..0000000
--- a/board/syteco/jadecpu/jadecpu.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * (c) 2010 Graf-Syteco, Matthias Weisser
- * <weisserm@arcor.de>
- *
- * (C) Copyright 2007, mycable GmbH
- * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/mb86r0x.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	struct mb86r0x_ccnt * ccnt = (struct mb86r0x_ccnt *)
-					MB86R0x_CCNT_BASE;
-
-	/* We select mode 0 for group 2 and mode 1 for group 4 */
-	writel(0x00000010, &ccnt->cmux_md);
-
-	gd->flags = 0;
-	gd->bd->bi_boot_params = PHYS_SDRAM + PHYS_SDRAM_SIZE - 0x10000;
-
-	icache_enable();
-	dcache_enable();
-
-	return 0;
-}
-
-static void setup_display_power(uint32_t pwr_bit, char *pwm_opts,
-				unsigned long pwm_base)
-{
-	struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
-					MB86R0x_GPIO_BASE;
-	struct mb86r0x_pwm *pwm = (struct mb86r0x_pwm *) pwm_base;
-	const char *e;
-
-	writel(readl(&gpio->gpdr2) | pwr_bit, &gpio->gpdr2);
-
-	e = getenv(pwm_opts);
-	if (e != NULL) {
-		const char *s;
-		uint32_t freq, init;
-
-		freq = 0;
-		init = 0;
-
-		s = strchr(e, 'f');
-		if (s != NULL)
-			freq = simple_strtol(s + 2, NULL, 0);
-
-		s = strchr(e, 'i');
-		if (s != NULL)
-			init = simple_strtol(s + 2, NULL, 0);
-
-		if (freq > 0) {
-			writel(CONFIG_MB86R0x_IOCLK / 1000 / freq,
-				&pwm->bcr);
-			writel(1002, &pwm->tpr);
-			writel(1, &pwm->pr);
-			writel(init * 10 + 1, &pwm->dr);
-			writel(1, &pwm->cr);
-			writel(1, &pwm->sr);
-		}
-	}
-}
-
-int board_late_init(void)
-{
-	struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
-					MB86R0x_GPIO_BASE;
-	uint32_t in_word;
-
-#ifdef CONFIG_VIDEO_MB86R0xGDC
-	/* Check if we have valid display settings and turn on power if so */
-	/* Display 0 */
-	if (getenv("gs_dsp_0_param") || getenv("videomode"))
-		setup_display_power((1 << 3), "gs_dsp_0_pwm",
-					MB86R0x_PWM0_BASE);
-
-	/* The corresponding GPIO is always an output */
-	writel(readl(&gpio->gpddr2) | (1 << 3), &gpio->gpddr2);
-
-	/* Display 1 */
-	if (getenv("gs_dsp_1_param") || getenv("videomode1"))
-		setup_display_power((1 << 4), "gs_dsp_1_pwm",
-					MB86R0x_PWM1_BASE);
-
-	/* The corresponding GPIO is always an output */
-	writel(readl(&gpio->gpddr2) | (1 << 4), &gpio->gpddr2);
-#endif /* CONFIG_VIDEO_MB86R0xGDC */
-
-	/* 5V enable */
-	writel(readl(&gpio->gpdr1) & ~(1 << 5), &gpio->gpdr1);
-	writel(readl(&gpio->gpddr1) | (1 << 5), &gpio->gpddr1);
-
-	/* We have special boot options if told by GPIOs */
-	in_word = readl(&gpio->gpdr1);
-
-	if ((in_word & 0xC0) == 0xC0) {
-		setenv("stdin", "serial");
-		setenv("stdout", "serial");
-		setenv("stderr", "serial");
-		setenv("preboot", "run gs_slow_boot");
-	} else if ((in_word & 0xC0) != 0) {
-		setenv("stdout", "vga");
-		setenv("preboot", "run gs_slow_boot");
-	} else {
-		setenv("stdin", "serial");
-		setenv("stdout", "serial");
-		setenv("stderr", "serial");
-		if (getenv("gs_devel")) {
-			setenv("preboot", "run gs_slow_boot");
-		} else {
-			setenv("preboot", "run gs_fast_boot");
-		}
-	}
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	return 0;
-}
-
-/*
- * DRAM configuration
- */
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
-					PHYS_SDRAM_SIZE);
-
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = gd->ram_size;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}
diff --git a/board/syteco/jadecpu/lowlevel_init.S b/board/syteco/jadecpu/lowlevel_init.S
deleted file mode 100644
index 9568cec..0000000
--- a/board/syteco/jadecpu/lowlevel_init.S
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2007, mycable GmbH
- * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
- *
- * (C) Copyright 2003, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/macro.h>
-#include <asm/arch/mb86r0x.h>
-#include <generated/asm-offsets.h>
-
-/* Set up the platform, once the cpu has been initialized */
-.globl lowlevel_init
-lowlevel_init:
-/*
- * Initialize Clock Reset Generator (CRG)
- */
-
-	ldr		r0, =MB86R0x_CRG_BASE
-
-	/* Not change the initial value that is set by external pin.*/
-WAIT_PLL:
-	ldr		r2, [r0, #CRG_CRPR]	/* Wait for PLLREADY */
-	tst		r2, #MB86R0x_CRG_CRPR_PLLRDY
-	beq		WAIT_PLL
-
-	/* Set clock gate control */
-	ldr		r1, =CONFIG_SYS_CRG_CRHA_INIT
-	str		r1, [r0, #CRG_CRHA]
-	ldr		r1, =CONFIG_SYS_CRG_CRPA_INIT
-	str		r1, [r0, #CRG_CRPA]
-	ldr		r1, =CONFIG_SYS_CRG_CRPB_INIT
-	str		r1, [r0, #CRG_CRPB]
-	ldr		r1, =CONFIG_SYS_CRG_CRHB_INIT
-	str		r1, [r0, #CRG_CRHB]
-	ldr		r1, =CONFIG_SYS_CRG_CRAM_INIT
-	str		r1, [r0, #CRG_CRAM]
-
-/*
- * Initialize External Bus Interface
- */
-	ldr		r0, =MB86R0x_MEMC_BASE
-
-	ldr		r1, =CONFIG_SYS_MEMC_MCFMODE0_INIT
-	str		r1, [r0, #MEMC_MCFMODE0]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFMODE2_INIT
-	str		r1, [r0, #MEMC_MCFMODE2]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFMODE4_INIT
-	str		r1, [r0, #MEMC_MCFMODE4]
-
-	ldr		r1, =CONFIG_SYS_MEMC_MCFTIM0_INIT
-	str		r1, [r0, #MEMC_MCFTIM0]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFTIM2_INIT
-	str		r1, [r0, #MEMC_MCFTIM2]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFTIM4_INIT
-	str		r1, [r0, #MEMC_MCFTIM4]
-
-	ldr		r1, =CONFIG_SYS_MEMC_MCFAREA0_INIT
-	str		r1, [r0, #MEMC_MCFAREA0]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFAREA2_INIT
-	str		r1, [r0, #MEMC_MCFAREA2]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFAREA4_INIT
-	str		r1, [r0, #MEMC_MCFAREA4]
-
-/*
- * Initialize DDR2 Controller
- */
-
-	/* Wait for PLL LOCK up time or more */
-	wait_timer	20
-
-	/*
-	 * (2) Initialize DDRIF
-	 */
-	ldr	r0, =MB86R0x_DDR2_BASE
-	ldr	r1, =CONFIG_SYS_DDR2_DRIMS_INIT
-	strh	r1, [r0, #DDR2_DRIMS]
-
-	/*
-	 * (3) Wait for 20MCKPs(120nsec) or more
-	 */
-	wait_timer	20
-
-	/*
-	 * (4) IRESET/IUSRRST release
-	 */
-	ldr	r0, =MB86R0x_CCNT_BASE
-	ldr	r1, =CONFIG_SYS_CCNT_CDCRC_INIT_1
-	str	r1, [r0, #CCNT_CDCRC]
-
-	/*
-	 * (5) Wait for 20MCKPs(120nsec) or more
-	 */
-	wait_timer	20
-
-	/*
-	 * (6) IDLLRST release
-	 */
-	ldr	r0, =MB86R0x_CCNT_BASE
-	ldr	r1, =CONFIG_SYS_CCNT_CDCRC_INIT_2
-	str	r1, [r0, #CCNT_CDCRC]
-
-	/*
-	 * (7+8) Wait for 200us(=200000ns) or more (DDR2 Spec)
-	 */
-	wait_timer	33536
-
-	/*
-	 * (9) MCKE ON
-	 */
-	ldr	r0, =MB86R0x_DDR2_BASE
-	ldr	r1, =CONFIG_SYS_DDR2_DRIC1_INIT
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_DRIC2_INIT
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =CONFIG_SYS_DDR2_DRCA_INIT
-	strh	r1, [r0, #DDR2_DRCA]
-	ldr	r1, =MB86R0x_DDR2_DRCI_INIT
-	strh	r1, [r0, #DDR2_DRIC]
-
-	/*
-	 * (10) Initialize SDRAM
-	 */
-
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	wait_timer	67			/* 400ns wait */
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_1
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_1
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_2
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_2
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_3
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_3
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_4
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_4
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_5
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_5
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	wait_timer 200
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_6
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_6
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_7
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_7
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	wait_timer	18			/* 105ns wait */
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_8
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_8
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	wait_timer	200			/* MRS to OCD: 200clock */
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_9
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_9
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_10
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_10
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCM_INIT
-	strh	r1, [r0, #DDR2_DRCM]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCST1_INIT
-	strh	r1, [r0, #DDR2_DRCST1]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCST2_INIT
-	strh	r1, [r0, #DDR2_DRCST2]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCR_INIT
-	strh	r1, [r0, #DDR2_DRCR]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCF_INIT
-	strh	r1, [r0, #DDR2_DRCF]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRASR_INIT
-	strh	r1, [r0, #DDR2_DRASR]
-
-	/*
-	 * (11) ODT setting
-	 */
-	ldr	r1, =CONFIG_SYS_DDR2_DROBS_INIT
-	strh	r1, [r0, #DDR2_DROBS]
-	ldr	r1, =CONFIG_SYS_DDR2_DROABA_INIT
-	strh	r1, [r0, #DDR2_DROABA]
-	ldr	r1, =CONFIG_SYS_DDR2_DRIBSODT1_INIT
-	strh	r1, [r0, #DDR2_DRIBSODT1]
-
-	/*
-	 * (12) Shift to ODTCONT ON (SDRAM side) and DDR2 usual operation mode
-	 */
-	ldr	r1, =CONFIG_SYS_DDR2_DROS_INIT
-	strh	r1, [r0, #DDR2_DROS]
-	ldr	r1, =MB86R0x_DDR2_DRCI_NORMAL
-	strh	r1, [r0, #DDR2_DRIC]
-
-	mov pc, lr