diff options
author | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2008-10-16 15:01:15 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-10-18 21:54:03 +0200 |
commit | 6d0f6bcf337c5261c08fabe12982178c2c489d76 (patch) | |
tree | ae13958ffa9c6b58c2ea97aac07a4ad2f04a350f /board/stxgp3 | |
parent | 71edc271816ec82cf0550dd6980be2da3cc2ad9e (diff) | |
download | u-boot-imx-6d0f6bcf337c5261c08fabe12982178c2c489d76.zip u-boot-imx-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.gz u-boot-imx-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.bz2 |
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'board/stxgp3')
-rw-r--r-- | board/stxgp3/flash.c | 26 | ||||
-rw-r--r-- | board/stxgp3/law.c | 10 | ||||
-rw-r--r-- | board/stxgp3/stxgp3.c | 14 | ||||
-rw-r--r-- | board/stxgp3/tlb.c | 28 |
4 files changed, 39 insertions, 39 deletions
diff --git a/board/stxgp3/flash.c b/board/stxgp3/flash.c index 1433491..61c9602 100644 --- a/board/stxgp3/flash.c +++ b/board/stxgp3/flash.c @@ -37,13 +37,13 @@ #include <common.h> -#if !defined(CFG_NO_FLASH) +#if !defined(CONFIG_SYS_NO_FLASH) -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ #if defined(CONFIG_ENV_IS_IN_FLASH) # ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) # endif # ifndef CONFIG_ENV_SIZE # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE @@ -72,7 +72,7 @@ unsigned long flash_init (void) /* Init: enable write, * or we cannot even write flash commands */ - for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { + for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; /* set the default sector offset */ @@ -80,7 +80,7 @@ unsigned long flash_init (void) /* Static FLASH Bank configuration here - FIXME XXX */ - size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]); + size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); if (flash_info[0].flash_id == FLASH_UNKNOWN) { printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", @@ -88,15 +88,15 @@ unsigned long flash_init (void) } /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]); + size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); flash_info[0].size = size; -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE+monitor_flash_len-1, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, &flash_info[0]); #ifdef CONFIG_ENV_IS_IN_FLASH @@ -329,7 +329,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) asm("sync"); return 1; } - if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = 0xFFFFFFFF; /* reset bank */ asm("sync"); @@ -458,7 +458,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) flag = 0; while (((csr = *addr) & 0x00800080) != 0x00800080) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { flag = 1; break; } @@ -502,7 +502,7 @@ static int clear_block_lock_bit(vu_long * addr) start = get_timer (0); while((*addr & 0x00800080) != 0x00800080){ - if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout on clearing Block Lock Bit\n"); *addr = 0xFFFFFFFF; /* reset bank */ asm("sync"); @@ -512,4 +512,4 @@ static int clear_block_lock_bit(vu_long * addr) return 0; } -#endif /* !CFG_NO_FLASH */ +#endif /* !CONFIG_SYS_NO_FLASH */ diff --git a/board/stxgp3/law.c b/board/stxgp3/law.c index a7e9ceb..ba89f0e 100644 --- a/board/stxgp3/law.c +++ b/board/stxgp3/law.c @@ -46,13 +46,13 @@ struct law_entry law_table[] = { #ifndef CONFIG_SPD_EEPROM - SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR), + SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR), #endif - SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), /* This is not so much the SDRAM map as it is the whole localbus map. */ - SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), - SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/stxgp3/stxgp3.c b/board/stxgp3/stxgp3.c index c80f1b3..3804fe0 100644 --- a/board/stxgp3/stxgp3.c +++ b/board/stxgp3/stxgp3.c @@ -203,7 +203,7 @@ int board_early_init_f(void) { #if defined(CONFIG_PCI) - volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR); + volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR); pci->peer &= 0xfffffffdf; /* disable master abort */ #endif @@ -215,7 +215,7 @@ reset_phy(void) { volatile uint *blatch; - blatch = (volatile uint *)CFG_LBC_LCLDEVS_BASE; + blatch = (volatile uint *)CONFIG_SYS_LBC_LCLDEVS_BASE; /* reset Giga bit Ethernet port if needed here */ @@ -267,7 +267,7 @@ show_activity(int flag) if (next_led_update > get_ticks()) return; - blatch = (volatile uint *)CFG_LBC_LCLDEVS_BASE; + blatch = (volatile uint *)CONFIG_SYS_LBC_LCLDEVS_BASE; led_bit >>= 1; if (led_bit == 0) @@ -284,7 +284,7 @@ initdram (int board_type) #if defined(CONFIG_DDR_DLL) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint temp_ddrdll = 0; /* Work around to stabilize DDR DLL */ @@ -308,11 +308,11 @@ initdram (int board_type) } -#if defined(CFG_DRAM_TEST) +#if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { - uint *pstart = (uint *) CFG_MEMTEST_START; - uint *pend = (uint *) CFG_MEMTEST_END; + uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; + uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; uint *p; printf("SDRAM test phase 1:\n"); diff --git a/board/stxgp3/tlb.c b/board/stxgp3/tlb.c index d410416..aa11a5d 100644 --- a/board/stxgp3/tlb.c +++ b/board/stxgp3/tlb.c @@ -28,16 +28,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xff000000 16M FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_16M, 1), @@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 1: 256M Non-cacheable, guarded * 0x80000000 256M PCI1 MEM First half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_256M, 1), @@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 2: 256M Non-cacheable, guarded * 0x90000000 256M PCI1 MEM Second half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 3: 256M Non-cacheable, guarded * 0xc0000000 256M Rapid IO MEM First half */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256M, 1), @@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 4: 256M Non-cacheable, guarded * 0xd0000000 256M Rapid IO MEM Second half */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_256M, 1), @@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xe000_0000 1M CCSRBAR * 0xe200_0000 16M PCI1 IO */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_64M, 1), @@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 6: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ - SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 6, BOOKE_PAGESZ_64M, 1), @@ -103,7 +103,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 7: 16K Non-cacheable, guarded * 0xfc000000 16K Configuration Latch register */ - SET_TLB_ENTRY(1, CFG_LBC_LCLDEVS_BASE, CFG_LBC_LCLDEVS_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_LCLDEVS_BASE, CONFIG_SYS_LBC_LCLDEVS_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_16K, 1), @@ -117,11 +117,11 @@ struct fsl_e_tlb_entry tlb_table[] = { * Likely it needs to be increased by two for these entries. */ #error("Update the number of table entries in tlb1_entry") - SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 8, BOOKE_PAGESZ_64M, 1), - SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000, + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 9, BOOKE_PAGESZ_64M, 1), #endif |