arm nomadik: rename board to nhk8815

This is an error in my side in the initial submission: nobody
calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>

4 files changed, 0 insertions, 496 deletions

diff --git a/board/st/nmdk8815/Makefile b/board/st/nmdk8815/Makefile
deleted file mode 100644
index be9a424..0000000
--- a/board/st/nmdk8815/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2004
-# ARM Ltd.
-# Philippe Robin, <philippe.robin@arm.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= nmdk8815.o
-SOBJS	:= platform.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/st/nmdk8815/config.mk b/board/st/nmdk8815/config.mk
deleted file mode 100644
index 590393b..0000000
--- a/board/st/nmdk8815/config.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-# (C) Copyright 2007
-# STMicroelectronics, <www.st.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# image should be loaded at 0x01000000
-#
-
-TEXT_BASE = 0x03F80000
diff --git a/board/st/nmdk8815/nmdk8815.c b/board/st/nmdk8815/nmdk8815.c
deleted file mode 100644
index edf4626..0000000
--- a/board/st/nmdk8815/nmdk8815.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2005
- * STMicrolelctronics, <www.st.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-void show_boot_progress(int progress)
-{
-	printf("%i\n", progress);
-}
-#endif
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_NOMADIK;
-	gd->bd->bi_boot_params = 0x00000100;
-	writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
-	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
-	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
-	writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
-
-	/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
-	writel(0x0000305b, REG_FSMC_BCR1);
-	writel(0x00033f33, REG_FSMC_BTR1);
-
-	icache_enable();
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	setenv("verify", "n");
-	return 0;
-}
-
-int dram_init(void)
-{
-	/* set dram bank start addr and size */
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-	return 0;
-}
diff --git a/board/st/nmdk8815/platform.S b/board/st/nmdk8815/platform.S
deleted file mode 100644
index 2a67110..0000000
--- a/board/st/nmdk8815/platform.S
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2005
- * STMicrolelctronics, <www.st.com>
- *
- * (C) Copyright 2004, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Jump to the flash address */
-	ldr r0, =CFG_ONENAND_BASE
-
-	/*
-	 * Make it independent whether we boot from 0x0 or 0x30000000.
-	 * Non-portable: it relies on the knowledge that ip has to be updated
-	 */
-	orr ip, ip, r0	/* adjust return address of cpu_init_crit */
-	orr lr, lr, r0	/* adjust return address */
-	orr pc, pc, r0	/* jump to the normal address */
-	nop
-
-	/* Initialize PLL, Remap clear, FSMC, MPMC here! */
-	/* What about GPIO, CLCD and UART */
-
-	/* PLL Initialization */
-	/* Prog the PLL1 @ 266 MHz ==> SDRAM Clock = 100.8 MHz */
-	ldr r0, =NOMADIK_SRC_BASE
-
-	ldr r1, =0x2B013502
-
-	str r1, [r0, #0x14]
-
-	/* Used to set all the timers clock to 2.4MHZ */
-	ldr r1, =0x2AAAA004
-	str r1, [r0]
-
-	ldr r1, =0x10000000
-	str r1, [r0, #0x10]
-
-	/* FSMC setup ---- */
-	ldr r0, =NOMADIK_FSMC_BASE
-
-	ldr r1, =0x10DB		/* For 16-bit NOR flash */
-	str r1, [r0, #0x08]
-
-	ldr r1, =0x03333333	/* For 16-bit NOR flash */
-	str r1, [r0, #0xc]
-
-	/* oneNAND setting */
-	ldr r1, =0x0000105B	/* BCR0 Prog control register */
-	str r1, [r0]
-
-	ldr r1, =0x0A200551	/* BTR0 Prog timing register */
-	str r1, [r0, #0x04]
-
-	/* preload the instructions into icache */
-	add r0, pc, #0x1F
-	bic r0, r0, #0x1F
-	mcr p15, 0, r0, c7, c13, 1
-	add r0, r0, #0x20
-	mcr p15, 0, r0, c7, c13, 1
-
-	/* Now Clear Remap */
-	ldr r0, =NOMADIK_SRC_BASE
-
-	ldr r1, =0x2004
-	str r1, [r0]
-
-	ldr r1, =0x10000000
-	str r1, [r0, #0x10]
-
-	ldr r0, =0x101E9000
-	ldr r1, =0x2004
-	str r1, [r0]
-
-	ldr r0, =NOMADIK_SRC_BASE
-	ldr r1, =0x2104
-	str r1, [r0]
-
-	/* FSMC setup -- */
-	mov r0, #(NOMADIK_FSMC_BASE & 0x10000000)
-	orr r0, r0, #(NOMADIK_FSMC_BASE & 0x0FFFFFFF)
-
-	ldr r1, =0x10DB		/* For 16-bit NOR flash */
-	str r1, [r0, #0x8]
-
-	ldr r1, =0x03333333	/* For 16-bit NOR flash */
-	str r1, [r0, #0xc]
-
-	/* MPMC Setup */
-	ldr r0, =NOMADIK_MPMC_BASE
-
-	ldr r1, =0xF00003
-	str r1, [r0]		/* Enable the MPMC and the DLL */
-
-	ldr r1, =0x183
-	str r1, [r0, #0x20]
-
-	ldr r2, =NOMADIK_PMU_BASE
-
-	ldr r1, =0x1111
-	str r1, [r2]
-
-	ldr r1, =0x1111		/* Prog the, mand delay strategy */
-	str r1, [r0, #0x28]
-
-	ldr r1, =0x103		/* NOP ,mand */
-	str r1, [r0, #0x20]
-
-	/* FIXME -- Wait required here */
-
-	ldr r1, =0x103		/* PALL ,mand*/
-	str r1, [r0, #0x20]
-
-	ldr r1, =0x1
-	str r1, [r0, #0x24]	/* To do at least two auto-refresh */
-
-	/* FIXME -- Wait required here */
-
-	/* Auto-refresh period = 7.8us @ SDRAM Clock = 100.8 MHz */
-	ldr r1, =0x31
-	str r1, [r0, #0x24]
-
-	/* Prog Little Endian, Not defined in 8800 board */
-	ldr r1, =0x0
-	str r1,	[r0, #0x8]
-
-
-	ldr r1, =0x2
-	str r1, [r0, #0x30]		/* Prog tRP timing */
-
-	ldr r1, =0x4			/* Change for 8815 */
-	str r1, [r0, #0x34]		/* Prog tRAS timing */
-
-	ldr r1, =0xB
-	str r1, [r0, #0x38]		/* Prog tSREX timing */
-
-
-	ldr r1, =0x1
-	str r1, [r0, #0x44]		/* Prog tWR timing */
-
-	ldr r1, =0x8
-	str r1, [r0, #0x48]		/* Prog tRC timing */
-
-	ldr r1, =0xA
-	str r1, [r0, #0x4C]		/* Prog tRFC timing */
-
-	ldr r1, =0xB
-	str r1, [r0, #0x50]		/* Prog tXSR timing */
-
-	ldr r1, =0x1
-	str r1, [r0, #0x54]		/* Prog tRRD timing */
-
-	ldr r1, =0x1
-	str r1, [r0, #0x58]		/* Prog tMRD timing */
-
-	ldr r1, =0x1
-	str r1, [r0, #0x5C]		/* Prog tCDLR timing */
-
-	/* DDR-SDRAM MEMORY IS ON BANK0 8815 */
-	ldr r1, =0x304			/* Prog RAS and CAS for CS 0 */
-	str r1, [r0, #0x104]
-
-	/* SDR-SDRAM MEMORY IS ON BANK1 8815 */
-	ldr r1, =0x304			/* Prog RAS and CAS for CS 1 */
-	str r1, [r0, #0x124]
-	/* THE DATA BUS WIDE IS PROGRAM FOR 16-BITS */
-	/* DDR-SDRAM MEMORY IS ON BANK0*/
-
-	ldr r1, =0x884			/* 8815 : config reg in BRC for CS0 */
-	str r1, [r0, #0x100]
-
-	/*SDR-SDRAM MEMORY IS ON BANK1*/
-
-	ldr r1, =0x884			/* 8815 : config reg in BRC for CS1 */
-	str r1, [r0, #0x120]
-
-	ldr r1, =0x83			/*MODE Mand*/
-	str r1, [r0, #0x20]
-
-	/* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK0 */
-
-	ldr r1, =0x62000			/*Data in*/
-	ldr r1, [r1]
-
-	/* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK1 */
-
-	ldr r1, =0x8062000
-	ldr r1, [r1]
-
-	ldr r1, =0x003
-	str r1, [r0, #0x20]
-
-	/* ENABLE ALL THE BUFFER FOR EACH AHB PORT*/
-
-	ldr r1, =0x01			/* Enable buffer 0 */
-	str r1, [r0, #0x400]
-
-	ldr r1, =0x01			/* Enable buffer 1 */
-	str r1, [r0, #0x420]
-
-	ldr r1, =0x01			/* Enable buffer 2 */
-	str r1, [r0, #0x440]
-
-	ldr r1, =0x01			/* Enable buffer 3 */
-	str r1, [r0, #0x460]
-
-	ldr r1, =0x01			/* Enable buffer 4 */
-	str r1, [r0, #0x480]
-
-	ldr r1, =0x01			/* Enable buffer 5 */
-	str r1, [r0, #0x4A0]
-
-	/* GPIO settings */
-
-	ldr r0, =NOMADIK_GPIO1_BASE
-
-	ldr r1, =0xC0600000
-	str r1, [r0, #0x20]
-
-	ldr r1, =0x3F9FFFFF		/* ABHI change this for uart1 */
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x3F9FFFFF		/* ABHI change this for uart1 */
-	str r1, [r0, #0x28]
-
-	ldr r0, =NOMADIK_GPIO0_BASE
-
-	ldr r1, =0xFFFFFFFF
-	str r1, [r0, #0x20]
-
-	ldr r1, =0x00
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x00
-	str r1, [r0, #0x28]
-
-	/* Configure CPLD_CTRL register for enabling MUX logic for UART0/UART2 */
-
-	ldr r0, =NOMADIK_FSMC_BASE
-
-	ldr r1, =0x10DB			/* INIT FSMC bank 0 */
-	str r1, [r0, #0x00]
-
-	ldr r1, =0x0FFFFFFF
-	str r1, [r0, #0x04]
-
-	ldr r1, =0x010DB		/* INIT FSMC bank 1 */
-	str r1, [r0, #0x08]
-
-	ldr r1, =0x00FFFFFFF
-	str r1, [r0, #0x0C]
-
-	ldr r0, =NOMADIK_UART0_BASE
-
-	ldr r1, =0x00000000
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x0000004e
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x00000008
-	str r1, [r0, #0x28]
-
-	ldr r1, =0x00000060
-	str r1, [r0, #0x2C]
-
-	ldr r1, =0x00000301
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x00000066
-	str r1, [r0]
-
-	ldr r0, =NOMADIK_UART1_BASE
-
-	ldr r1, =0x00000000
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x0000004e
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x00000008
-	str r1, [r0, #0x28]
-
-	ldr r1, =0x00000060
-	str r1, [r0, #0x2C]
-
-	ldr r1, =0x00000301
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x00000066
-	str r1, [r0]
-
-	ldr r0, =NOMADIK_UART2_BASE
-
-	ldr r1, =0x00000000
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x0000004e
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x00000008
-	str r1, [r0, #0x28]
-
-	ldr r1, =0x00000060
-	str r1, [r0, #0x2C]
-
-	ldr r1, =0x00000301
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x00000066
-	str r1, [r0]
-
-	/* Configure CPLD to enable UART0 */
-
-	mov pc, lr