armv7: Add support for ST-Ericsson U8500 href platform

Minimal platform support to boot linux from SD.

Supported devices/hw limited to external MMC/SD slot,
GPIO, I2C and minimal PRCMU.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Albert Aribaud <albert.aribaud@free.fr>

1 files changed, 165 insertions, 0 deletions

diff --git a/board/st-ericsson/u8500/prcmu.c b/board/st-ericsson/u8500/prcmu.c
new file mode 100644
index 0000000..6f9302f
--- /dev/null
+++ b/board/st-ericsson/u8500/prcmu.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson SA
+ *
+ * Adapted from the Linux version:
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+/*
+ * NOTE: This currently does not support the I2C workaround access method.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#include "prcmu-fw.h"
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL (U8500_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET (U8500_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR (U8500_PRCMU_BASE + 0x104)
+
+static int prcmu_is_ready(void)
+{
+	int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE;
+	if (!ready)
+		printf("PRCMU firmware not ready\n");
+	return ready;
+}
+
+static int _wait_for_req_complete(int num)
+{
+	int timeout = 1000;
+
+	/* checking any already on-going transaction */
+	while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--)
+		;
+
+	timeout = 1000;
+
+	/* Set an interrupt to XP70 */
+	writel(1 << num, PRCM_MBOX_CPU_SET);
+
+	while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--)
+		;
+
+	if (!timeout) {
+		printf("PRCMU operation timed out\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C
+ * @reg: - db8500 register bank to be accessed
+ * @slave:  - db8500 register to be accessed
+ * Returns: ACK_MB5  value containing the status
+ */
+int prcmu_i2c_read(u8 reg, u16 slave)
+{
+	uint8_t i2c_status;
+	uint8_t i2c_val;
+
+	if (!prcmu_is_ready())
+		return -1;
+
+	debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n",
+			reg, slave);
+
+	/* prepare the data for mailbox 5 */
+	writeb((reg << 1) | I2CREAD, PRCM_REQ_MB5_I2COPTYPE_REG);
+	writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
+	writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
+	writeb(0, PRCM_REQ_MB5_I2CVAL);
+
+	_wait_for_req_complete(REQ_MB5);
+
+	/* retrieve values */
+	debug("ack-mb5:transfer status = %x\n",
+			readb(PRCM_ACK_MB5_STATUS));
+	debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
+	debug("ack-mb5:slave_add = %x\n",
+			readb(PRCM_ACK_MB5_SLAVE));
+	debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
+
+	i2c_status = readb(PRCM_ACK_MB5_STATUS);
+	i2c_val = readb(PRCM_ACK_MB5_VAL);
+
+	if (i2c_status == I2C_RD_OK)
+		return i2c_val;
+	else {
+
+		printf("prcmu_i2c_read:read return status= %d\n",
+				i2c_status);
+		return -1;
+	}
+
+}
+
+/**
+ * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C
+ * @reg: - db8500 register bank to be accessed
+ * @slave:  - db800 register to be written to
+ * @reg_data: - the data to write
+ * Returns: ACK_MB5 value containing the status
+ */
+int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data)
+{
+	uint8_t i2c_status;
+
+	if (!prcmu_is_ready())
+		return -1;
+
+	debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n",
+			reg, slave);
+
+	/* prepare the data for mailbox 5 */
+	writeb((reg << 1) | I2CWRITE, PRCM_REQ_MB5_I2COPTYPE_REG);
+	writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
+	writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
+	writeb(reg_data, PRCM_REQ_MB5_I2CVAL);
+
+	debug("\ncpu_is_u8500v11\n");
+	_wait_for_req_complete(REQ_MB5);
+
+	/* retrieve values */
+	debug("ack-mb5:transfer status = %x\n",
+			readb(PRCM_ACK_MB5_STATUS));
+	debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
+	debug("ack-mb5:slave_add = %x\n",
+			readb(PRCM_ACK_MB5_SLAVE));
+	debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
+
+	i2c_status = readb(PRCM_ACK_MB5_STATUS);
+	debug("\ni2c_status = %x\n", i2c_status);
+	if (i2c_status == I2C_WR_OK)
+		return 0;
+	else {
+		printf("ape-i2c: i2c_status : 0x%x\n", i2c_status);
+		return -1;
+	}
+}