diff options
| author | Fabio Estevam <fabio.estevam@freescale.com> | 2014-01-03 15:55:58 -0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2014-01-15 10:33:25 +0100 |
| commit | 3a21773129f6ef218f1978d05a1a5d5cf6801ab6 (patch) | |
| tree | cc0839f6d06048b4ef9a1d292316798b77ebc6b6 /board/solidrun/hummingboard/README | |
| parent | 5f98d0b5d3038cb3345712bc779efacaba4322f7 (diff) | |
| download | u-boot-imx-3a21773129f6ef218f1978d05a1a5d5cf6801ab6.zip u-boot-imx-3a21773129f6ef218f1978d05a1a5d5cf6801ab6.tar.gz u-boot-imx-3a21773129f6ef218f1978d05a1a5d5cf6801ab6.tar.bz2 | |
mx6: Add initial support for the Hummingboard solo
SolidRun has designed the Hummingboard board based on mx6q/dl/solo.
Add the initial support for the mx6 solo variant.
More information about this hardware can be found at:
http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware
(Carrier-One was the previous name of Hummingboard).
Based on the work from Jon Nettleton <jon.nettleton@gmail.com>.
Signed-off-by: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'board/solidrun/hummingboard/README')
| -rw-r--r-- | board/solidrun/hummingboard/README | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/board/solidrun/hummingboard/README b/board/solidrun/hummingboard/README new file mode 100644 index 0000000..cfd62d4 --- /dev/null +++ b/board/solidrun/hummingboard/README @@ -0,0 +1,40 @@ +U-Boot for SolidRun Hummingboard +-------------------------------- + +This file contains information for the port of U-Boot to the Hummingboard. + +For more details about Hummingboard, please refer to: +http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware + +(Carrier-One was the previous name of Hummingboard). + +Building U-boot for Hummingboard +-------------------------------- + +To build U-Boot for the Hummingboard Solo version: + +$ make hummingboard_solo_config +$ make + +Flashing U-boot into the SD card +-------------------------------- + +- After the 'make' command completes, the generated 'u-boot.imx' binary must be +flashed into the SD card: + +$ sudo dd if=u-boot.imx of=/dev/mmcblk0 bs=1k seek=1; sync + +(Note - the SD card node may vary, so adjust this as needed). + +Also, a more detailed explanation on how to format the SD card is available +at doc/README.imximage. + +- Insert the micro SD card into the slot located in the bottom of the board + +- Connect a 3.3V USB to serial converter cable to the host PC. The MX6 UART +signals are available in the 26 pin connector as shown at: +http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware +(Check for "26 pin header layout"). + +- Power up the board via USB cable (CON201) and U-boot messages will appear in +the serial console. |