video: mb862xx: improve board-specific Lime configuration

To avoid board-specific code accessing the mb862xx registers directly,
the public function mb862xx_probe() has been introduced. Furthermore,
the "Change of Clock Frequency" and "Set Memory I/F Mode" registers
are now defined by CONFIG_SYS_MB862xx_CCF and CONFIG_SYS_MB862xx__MMR,
respectively. The BSPs for the socrates and lwmon5 boards have been
adapted accordingly.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>

1 files changed, 7 insertions, 39 deletions

diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c
index 51d66d5..9183c15 100644
--- a/board/socrates/socrates.c
+++ b/board/socrates/socrates.c
@@ -268,17 +268,6 @@ ft_board_setup(void *blob, bd_t *bd)
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
 
-#define CONFIG_SYS_LIME_SRST		((CONFIG_SYS_LIME_BASE) + 0x01FC002C)
-#define CONFIG_SYS_LIME_CCF		((CONFIG_SYS_LIME_BASE) + 0x01FC0038)
-#define CONFIG_SYS_LIME_MMR		((CONFIG_SYS_LIME_BASE) + 0x01FCFFFC)
-/* Lime clock frequency */
-#define CONFIG_SYS_LIME_CLK_100MHZ	0x00000
-#define CONFIG_SYS_LIME_CLK_133MHZ	0x10000
-/* SDRAM parameter */
-#define CONFIG_SYS_LIME_MMR_VALUE	0x4157BA63
-
-#define DISPLAY_WIDTH		800
-#define DISPLAY_HEIGHT		480
 #define DEFAULT_BRIGHTNESS	25
 #define BACKLIGHT_ENABLE	(1 << 31)
 
@@ -308,14 +297,12 @@ const gdc_regs *board_get_regs (void)
 	return init_regs;
 }
 
-#define CONFIG_SYS_LIME_CID		((CONFIG_SYS_LIME_BASE) + 0x01FC00F0)
-#define CONFIG_SYS_LIME_REV		((CONFIG_SYS_LIME_BASE) + 0x01FF8084)
 int lime_probe(void)
 {
 	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	uint cfg_br2;
 	uint cfg_or2;
-	uint reg;
+	int type;
 
 	cfg_br2 = memctl->br2;
 	cfg_or2 = memctl->or2;
@@ -325,21 +312,15 @@ int lime_probe(void)
 	memctl->or2 = 0xfc000410;
 	memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901;
 
-	/* Try to access GDC ID/Revision registers */
-	reg = in_be32((void *)CONFIG_SYS_LIME_CID);
-	reg = in_be32((void *)CONFIG_SYS_LIME_CID);
-	if (reg == 0x303) {
-		reg = in_be32((void *)CONFIG_SYS_LIME_REV);
-		reg = in_be32((void *)CONFIG_SYS_LIME_REV);
-		reg = ((reg & ~0xff) == 0x20050100) ? 1 : 0;
-	} else
-		reg = 0;
+	/* Get controller type */
+	type = mb862xx_probe(CONFIG_SYS_LIME_BASE);
 
 	/* Restore previous CS2 configuration */
 	memctl->br2 = 0;
 	memctl->or2 = cfg_or2;
 	memctl->br2 = cfg_br2;
-	return reg;
+
+	return (type == MB862XX_TYPE_LIME) ? 1 : 0;
 }
 
 /* Returns Lime base address */
@@ -348,21 +329,8 @@ unsigned int board_video_init (void)
 	if (!lime_probe())
 		return 0;
 
-	/*
-	 * Reset Lime controller
-	 */
-	out_be32((void *)CONFIG_SYS_LIME_SRST, 0x1);
-	udelay(200);
-
-	/* Set Lime clock to 133MHz */
-	out_be32((void *)CONFIG_SYS_LIME_CCF, CONFIG_SYS_LIME_CLK_133MHZ);
-	/* Delay required */
-	udelay(300);
-	/* Set memory parameters */
-	out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_LIME_MMR_VALUE);
-
-	mb862xx.winSizeX = DISPLAY_WIDTH;
-	mb862xx.winSizeY = DISPLAY_HEIGHT;
+	mb862xx.winSizeX = 800;
+	mb862xx.winSizeY = 480;
 	mb862xx.gdfIndex = GDF_15BIT_555RGB;
 	mb862xx.gdfBytesPP = 2;