move Samsung's board to board/samsung

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 0 insertions, 112 deletions

diff --git a/board/smdk2400/smdk2400.c b/board/smdk2400/smdk2400.c
deleted file mode 100644
index 4d1f1a6..0000000
--- a/board/smdk2400/smdk2400.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <s3c2400.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void);
-int mdm_init (bd_t *);
-extern void disable_putc(void);
-extern void enable_putc(void);
-extern int hwflow_onoff(int);
-extern int do_mdm_init; /* defined in common/main.c */
-#endif /* CONFIG_MODEM_SUPPORT */
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-
-	/* memory and cpu-speed are setup before relocation */
-	/* change the clock to be 50 MHz 1:1:1 */
-	clk_power->MPLLCON = 0x5c042;
-	clk_power->CLKDIVN = 0;
-	/* set up the I/O ports */
-	gpio->PACON = 0x3ffff;
-	gpio->PBCON = 0xaaaaaaaa;
-	gpio->PBUP = 0xffff;
-	gpio->PECON = 0x0;
-	gpio->PEUP = 0x0;
-#ifdef CONFIG_HWFLOW
-	/*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
-	/*   10,   10,   00,   00,    10,   00,    10 */
-	gpio->PFCON=0xa22;
-	/* Disable pull-up on Rx, Tx, CTS and RTS pins */
-	gpio->PFUP=0x35;
-#else
-	/*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
-	/*   00,   00,   00,   00,    10,   00,    10 */
-	gpio->PFCON = 0x22;
-	/* Disable pull-up on Rx and Tx pins */
-	gpio->PFUP = 0x5;
-#endif	/* CONFIG_HWFLOW */
-	gpio->PGCON = 0x0;
-	gpio->PGUP = 0x0;
-	gpio->OPENCR = 0x0;
-
-	/* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
-	gd->bd->bi_arch_number = MACH_TYPE_SMDK2400;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x0C000100;
-
-#ifdef CONFIG_MODEM_SUPPORT
-	if (key_pressed()) {
-		disable_putc();	/* modem doesn't understand banner etc */
-		do_mdm_init = 1;
-	}
-#endif	/* CONFIG_MODEM_SUPPORT */
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void)
-{
-	int rc;
-	if (1) {	/* check for button push here, now just return 1 */
-		rc = 1;
-	}
-
-	return rc;
-}
-#endif	/* CONFIG_MODEM_SUPPORT */