diff options
author | Kumar Gala <galak@kernel.crashing.org> | 2010-12-01 22:55:54 -0600 |
---|---|---|
committer | Kumar Gala <galak@kernel.crashing.org> | 2010-12-13 09:32:15 -0600 |
commit | 72c96a6802d9b1c949785d1d152f8bc8666c753d (patch) | |
tree | e22f1e828882e091dc84c32ebdfef592195d0763 /board/sixnet | |
parent | ac8983bcba75576c50307b5e8dc8fb848740ee61 (diff) | |
download | u-boot-imx-72c96a6802d9b1c949785d1d152f8bc8666c753d.zip u-boot-imx-72c96a6802d9b1c949785d1d152f8bc8666c753d.tar.gz u-boot-imx-72c96a6802d9b1c949785d1d152f8bc8666c753d.tar.bz2 |
tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMII
The following commit:
commit 46e91674fb4b6d06c6a4984c0b5ac7d9a16923f4
Author: Peter Tyser <ptyser@xes-inc.com>
Date: Tue Nov 3 17:52:07 2009 -0600
tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode
Removed setting Auto-Neg by default, however this is believed to be
proper default configuration for initialization of the TBI interface.
Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the
XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require
Auto-Neg to be disabled to function properly.
This addresses a breakage on the P2020 DS & MPC8572 DS boards when used
with an SGMII riser card. We also remove setting
CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the
default setting is sufficient for them.
Additionally, we clean up the code a bit to remove an unnecessary second
define.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
Diffstat (limited to 'board/sixnet')
0 files changed, 0 insertions, 0 deletions