diff options
| author | Heiko Schocher <hs@denx.de> | 2013-10-22 11:03:18 +0200 |
|---|---|---|
| committer | Heiko Schocher <hs@denx.de> | 2013-11-13 06:18:17 +0100 |
| commit | 6789e84ecaa8f45d053084e08c381284a04abff7 (patch) | |
| tree | c4ad9d9cab924058bd66a7af160f8e526bfb7231 /board/siemens | |
| parent | 124913556c4b99909f40b4bf4ceaefe2b555d6f8 (diff) | |
| download | u-boot-imx-6789e84ecaa8f45d053084e08c381284a04abff7.zip u-boot-imx-6789e84ecaa8f45d053084e08c381284a04abff7.tar.gz u-boot-imx-6789e84ecaa8f45d053084e08c381284a04abff7.tar.bz2 | |
i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
- add omap24xx driver to new multibus/multiadpater support
- adapted all config files, which uses this driver
Tested on the am335x based siemens boards rut, dxr2 and pxm2
posted here:
http://patchwork.ozlabs.org/patch/263211/
Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Tom Rini <trini@ti.com>
Cc: Lars Poeschel <poeschel@lemonage.de>
Cc: Steve Sakoman <sakoman@gmail.com>
Cc: Thomas Weber <weber@corscience.de>
Cc: Tom Rix <Tom.Rix@windriver.com>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Cc: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Ilya Yanok <yanok@emcraft.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Nishanth Menon <nm@ti.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Peter Barada <peter.barada@logicpd.com>
Cc: Nagendra T S <nagendra@mistralsolutions.com>
Cc: Michael Jones <michael.jones@matrix-vision.de>
Cc: Raphael Assenat <raph@8d.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board/siemens')
| -rw-r--r-- | board/siemens/common/board.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index 6279c32..32d2ee4 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -42,7 +42,7 @@ void set_mux_conf_regs(void) { /* Initalize the board header */ enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(0); if (read_eeprom() < 0) puts("Could not get board ID.\n"); @@ -67,7 +67,7 @@ int board_init(void) #if defined(CONFIG_HW_WATCHDOG) hw_watchdog_init(); #endif /* defined(CONFIG_HW_WATCHDOG) */ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(0); if (read_eeprom() < 0) puts("Could not get board ID.\n"); |