Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

3 files changed, 61 insertions, 61 deletions

diff --git a/board/siemens/CCM/ccm.c b/board/siemens/CCM/ccm.c
index d653763..8053da4 100644
--- a/board/siemens/CCM/ccm.c
+++ b/board/siemens/CCM/ccm.c
@@ -133,7 +133,7 @@ int checkboard (void)
 int power_on_reset(void)
 {
     /* Test Reset Status Register */
-    return ((volatile immap_t *)CFG_IMMR)->im_clkrst.car_rsr & RSR_CSRS ? 0:1;
+    return ((volatile immap_t *)CONFIG_SYS_IMMR)->im_clkrst.car_rsr & RSR_CSRS ? 0:1;
 }
 
 #define PB_LED_GREEN	0x10000		/* red LED is on PB.15 */
@@ -142,7 +142,7 @@ int power_on_reset(void)
 
 static void init_leds (void)
 {
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t *immap  = (immap_t *)CONFIG_SYS_IMMR;
 
     immap->im_cpm.cp_pbpar &= ~PB_LEDS;
     immap->im_cpm.cp_pbodr &= ~PB_LEDS;
@@ -157,7 +157,7 @@ static void init_leds (void)
 
 phys_size_t initdram (int board_type)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
     long int size8, size9;
     long int size = 0;
@@ -171,7 +171,7 @@ phys_size_t initdram (int board_type)
      * with two SDRAM banks or four cycles every 31.2 us with one
      * bank. It will be adjusted after memory sizing.
      */
-    memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+    memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
     memctl->memc_mar  = 0x00000088;
 
@@ -180,10 +180,10 @@ phys_size_t initdram (int board_type)
      * preliminary addresses - these have to be modified after the
      * SDRAM size has been determined.
      */
-    memctl->memc_or2 = CFG_OR2_PRELIM;
-    memctl->memc_br2 = CFG_BR2_PRELIM;
+    memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+    memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
-    memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+    memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
 
     udelay(200);
 
@@ -203,21 +203,21 @@ phys_size_t initdram (int board_type)
      *
      * try 8 column mode
      */
-    size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+    size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 
     udelay (1000);
 
     /*
      * try 9 column mode
      */
-    size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+    size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 
     if (size8 < size9) {		/* leave configuration at 9 columns	*/
 	size = size9;
 /*	debug ("SDRAM in 9 column mode: %ld MB\n", size >> 20);	*/
     } else {				/* back to 8 columns			*/
 	size = size8;
-	memctl->memc_mamr = CFG_MAMR_8COL;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 	udelay(500);
 /*	debug ("SDRAM in 8 column mode: %ld MB\n", size >> 20);	*/
     }
@@ -230,7 +230,7 @@ phys_size_t initdram (int board_type)
      */
     if (size < 0x02000000) {
 	/* reduce to 15.6 us (62.4 us / quad) */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 	udelay(1000);
     }
 
@@ -238,13 +238,13 @@ phys_size_t initdram (int board_type)
      * Final mapping
      */
 
-    memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-    memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+    memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+    memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 
     /* adjust refresh rate depending on SDRAM type, one bank */
     reg = memctl->memc_mptpr;
-    reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+    reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
     memctl->memc_mptpr = reg;
 
     can_driver_enable ();
@@ -263,7 +263,7 @@ phys_size_t initdram (int board_type)
  */
 void can_driver_enable (void)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
 
     /* Initialize MBMR */
@@ -302,13 +302,13 @@ void can_driver_enable (void)
     memctl->memc_mcr = 0x011C | UPMB;
 
     /* Initialize OR3 / BR3 for CAN Bus Controller */
-    memctl->memc_or3 = CFG_OR3_CAN;
-    memctl->memc_br3 = CFG_BR3_CAN;
+    memctl->memc_or3 = CONFIG_SYS_OR3_CAN;
+    memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
 }
 
 void can_driver_disable (void)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
 
     /* Reset OR3 / BR3 to disable  CAN Bus Controller */
@@ -331,7 +331,7 @@ void can_driver_disable (void)
 
 static long int dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
 
     memctl->memc_mamr = mamr_value;
@@ -341,24 +341,24 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize
 
 /* ------------------------------------------------------------------------- */
 
-#define	ETH_CFG_BITS	(CFG_PB_ETH_CFG1 | CFG_PB_ETH_CFG2  | CFG_PB_ETH_CFG3 )
+#define	ETH_CFG_BITS	(CONFIG_SYS_PB_ETH_CFG1 | CONFIG_SYS_PB_ETH_CFG2  | CONFIG_SYS_PB_ETH_CFG3 )
 
-#define ETH_ALL_BITS	(ETH_CFG_BITS | CFG_PB_ETH_POWERDOWN)
+#define ETH_ALL_BITS	(ETH_CFG_BITS | CONFIG_SYS_PB_ETH_POWERDOWN)
 
 void	reset_phy(void)
 {
-	immap_t *immr = (immap_t *)CFG_IMMR;
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	ulong value;
 
 	/* Configure all needed port pins for GPIO */
-#ifdef CFG_ETH_MDDIS_VALUE
-	immr->im_ioport.iop_padat |=   CFG_PA_ETH_MDDIS;
+#ifdef CONFIG_SYS_ETH_MDDIS_VALUE
+	immr->im_ioport.iop_padat |=   CONFIG_SYS_PA_ETH_MDDIS;
 #else
-	immr->im_ioport.iop_padat &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET);	/* Set low */
+	immr->im_ioport.iop_padat &= ~(CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET);	/* Set low */
 #endif
-	immr->im_ioport.iop_papar &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET);	/* GPIO */
-	immr->im_ioport.iop_paodr &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET);	/* active output */
-	immr->im_ioport.iop_padir |=   CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET;	/* output */
+	immr->im_ioport.iop_papar &= ~(CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET);	/* GPIO */
+	immr->im_ioport.iop_paodr &= ~(CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET);	/* active output */
+	immr->im_ioport.iop_padir |=   CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET;	/* output */
 
 	immr->im_cpm.cp_pbpar &= ~(ETH_ALL_BITS);	/* GPIO */
 	immr->im_cpm.cp_pbodr &= ~(ETH_ALL_BITS);	/* active output */
@@ -366,23 +366,23 @@ void	reset_phy(void)
 	value  = immr->im_cpm.cp_pbdat;
 
 	/* Assert Powerdown and Reset signals */
-	value |=  CFG_PB_ETH_POWERDOWN;
+	value |=  CONFIG_SYS_PB_ETH_POWERDOWN;
 
 	/* PHY configuration includes MDDIS and CFG1 ... CFG3 */
-#ifdef CFG_ETH_CFG1_VALUE
-	value |=   CFG_PB_ETH_CFG1;
+#ifdef CONFIG_SYS_ETH_CFG1_VALUE
+	value |=   CONFIG_SYS_PB_ETH_CFG1;
 #else
-	value &= ~(CFG_PB_ETH_CFG1);
+	value &= ~(CONFIG_SYS_PB_ETH_CFG1);
 #endif
-#ifdef CFG_ETH_CFG2_VALUE
-	value |=   CFG_PB_ETH_CFG2;
+#ifdef CONFIG_SYS_ETH_CFG2_VALUE
+	value |=   CONFIG_SYS_PB_ETH_CFG2;
 #else
-	value &= ~(CFG_PB_ETH_CFG2);
+	value &= ~(CONFIG_SYS_PB_ETH_CFG2);
 #endif
-#ifdef CFG_ETH_CFG3_VALUE
-	value |=   CFG_PB_ETH_CFG3;
+#ifdef CONFIG_SYS_ETH_CFG3_VALUE
+	value |=   CONFIG_SYS_PB_ETH_CFG3;
 #else
-	value &= ~(CFG_PB_ETH_CFG3);
+	value &= ~(CONFIG_SYS_PB_ETH_CFG3);
 #endif
 
 	/* Drive output signals to initial state */
@@ -391,11 +391,11 @@ void	reset_phy(void)
 	udelay (10000);
 
 	/* De-assert Ethernet Powerdown */
-	immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */
+	immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* Enable PHY power */
 	udelay (10000);
 
 	/* de-assert RESET signal of PHY */
-	immr->im_ioport.iop_padat |= CFG_PA_ETH_RESET;
+	immr->im_ioport.iop_padat |= CONFIG_SYS_PA_ETH_RESET;
 	udelay (1000);
 }
 
diff --git a/board/siemens/CCM/flash.c b/board/siemens/CCM/flash.c
index 9c32785..ad1ed79 100644
--- a/board/siemens/CCM/flash.c
+++ b/board/siemens/CCM/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -38,13 +38,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -75,38 +75,38 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
-		memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 				    BR_MS_GPCM | BR_V;
 
 		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
 					  &flash_info[1]);
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -419,7 +419,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long*)(info->start[l_sect]);
 	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -542,7 +542,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/siemens/CCM/fpga_ccm.c b/board/siemens/CCM/fpga_ccm.c
index 11b97bc..50b08ab 100644
--- a/board/siemens/CCM/fpga_ccm.c
+++ b/board/siemens/CCM/fpga_ccm.c
@@ -31,7 +31,7 @@
 
 fpga_t fpga_list[] = {
     { "PUMA" , PUMA_CONF_BASE ,
-      CFG_PC_PUMA_INIT , CFG_PC_PUMA_PROG , CFG_PC_PUMA_DONE  }
+      CONFIG_SYS_PC_PUMA_INIT , CONFIG_SYS_PC_PUMA_PROG , CONFIG_SYS_PC_PUMA_DONE  }
 };
 int fpga_count = sizeof(fpga_list) / sizeof(fpga_t);
 
@@ -90,7 +90,7 @@ const uint puma_table[] =
 
 ulong fpga_control (fpga_t* fpga, int cmd)
 {
-    volatile immap_t     *immr  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immr  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immr->im_memctl;
 
     switch (cmd) {