diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2009-05-15 23:48:37 +0200 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2009-06-12 20:39:51 +0200 |
| commit | 28b00324becf3552134ae1e086509dc9c3d6e932 (patch) | |
| tree | 594dc834c42c982e1aa3b075018ebe8747e61ca3 /board/siemens/CCM | |
| parent | 136cf92dc9e84c9a1bf567f1fe741092bf765495 (diff) | |
| download | u-boot-imx-28b00324becf3552134ae1e086509dc9c3d6e932.zip u-boot-imx-28b00324becf3552134ae1e086509dc9c3d6e932.tar.gz u-boot-imx-28b00324becf3552134ae1e086509dc9c3d6e932.tar.bz2 | |
dm355 evm support
Initial U-Boot support for the DaVinci DM355 EVM. This is a board
from Spectrum Digital. Board docs include schematic and firmware
for its microcontroller:
http://c6000.spectrumdigital.com/evmdm355/revd/
Most of the DM355 chip is fully documented by TI, the most notable
exception being the MPEG/JPEG coprocessor (programmable using codecs
available at no cost from TI), which is omitted from its DM335 sibling:
http://focus.ti.com/docs/prod/folders/print/tms320dm355.html
This version can boot from the on-board DM9000 Ethernet chip, after
being loaded (from NAND, MMC/SD, or UART). In the near future, NAND
and USB support could be added ... NAND support is being held back
until the support for the 4-bit ECC hardware is ready.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'board/siemens/CCM')
0 files changed, 0 insertions, 0 deletions