x86: Remove Unmaintained Boards

The SC520 CDP boards originally implemented by Daniel Engström are now
very broken. Attempts to contact Daniel via the email address on the
copyright notice have failed. Remove these boards from mainline

1 files changed, 0 insertions, 271 deletions

diff --git a/board/sc520_cdp/sc520_cdp_pci.c b/board/sc520_cdp/sc520_cdp_pci.c
deleted file mode 100644
index ccb7988..0000000
--- a/board/sc520_cdp/sc520_cdp_pci.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/ic/sc520.h>
-#include <asm/ic/pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef SC520_CDP_DEBUG
-
-#ifdef	SC520_CDP_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
-	/* a configurable lists of irqs to steal
-	 * when we need one (a board with more pci interrupt pins
-	 * would use a larger table */
-	static int irq_list[] = {
-		CONFIG_SYS_FIRST_PCI_IRQ,
-		CONFIG_SYS_SECOND_PCI_IRQ,
-		CONFIG_SYS_THIRD_PCI_IRQ,
-		CONFIG_SYS_FORTH_PCI_IRQ
-	};
-	static int next_irq_index=0;
-
-	uchar tmp_pin;
-	int pin;
-
-	pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
-	pin = tmp_pin;
-
-	pin-=1; /* pci config space use 1-based numbering */
-	if (-1 == pin) {
-		return; /* device use no irq */
-	}
-
-
-	/* map device number +  pin to a pin on the sc520 */
-	switch (PCI_DEV(dev)) {
-	case 20:
-		pin+=SC520_PCI_INTA;
-		break;
-
-	case 19:
-		pin+=SC520_PCI_INTB;
-		break;
-
-	case 18:
-		pin+=SC520_PCI_INTC;
-		break;
-
-	case 17:
-		pin+=SC520_PCI_INTD;
-		break;
-
-	default:
-		return;
-	}
-
-	pin&=3; /* wrap around */
-
-	if (sc520_pci_ints[pin] == -1) {
-		/* re-route one interrupt for us */
-		if (next_irq_index > 3) {
-			return;
-		}
-		if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) {
-			return;
-		}
-		next_irq_index++;
-	}
-
-
-	if (-1 != sc520_pci_ints[pin]) {
-		pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
-					   sc520_pci_ints[pin]);
-	}
-	PRINTF("fixup_irq: device %d pin %c irq %d\n",
-	       PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]);
-}
-
-static struct pci_controller sc520_cdp_hose = {
-	fixup_irq: pci_sc520_cdp_fixup_irq,
-};
-
-void pci_init_board(void)
-{
-	pci_sc520_init(&sc520_cdp_hose);
-}
-
-/*
- * This function should map a chunk of size bytes
- * of the system address space to the ISA bus
- *
- * The function will return the memory address
- * as seen by the host (which may very will be the
- * same as the bus address)
- */
-u32 isa_map_rom(u32 bus_addr, int size)
-{
-	u32 par;
-
-	PRINTF("isa_map_rom asked to map %d bytes at %x\n",
-	       size, bus_addr);
-
-	par = size;
-	if (par < 0x80000) {
-		par = 0x80000;
-	}
-	par >>= 12;
-	par--;
-	par&=0x7f;
-	par <<= 18;
-	par |= (bus_addr>>12);
-	par |= 0x50000000;
-
-	PRINTF ("setting PAR11 to %x\n", par);
-
-	/* Map rom 0x10000 with PAR1 */
-	sc520_mmcr->par[11] = par;
-
-	return bus_addr;
-}
-
-/*
- * this function removed any mapping created
- * with pci_get_rom_window()
- */
-void isa_unmap_rom(u32 addr)
-{
-	PRINTF("isa_unmap_rom asked to unmap %x", addr);
-	if ((addr>>12) == (sc520_mmcr->par[11] & 0x3ffff)) {
-		sc520_mmcr->par[11] = 0;
-		PRINTF(" done\n");
-		return;
-	}
-	PRINTF(" not ours\n");
-}
-
-#define PCI_ROM_TEMP_SPACE 0x10000
-/*
- * This function should map a chunk of size bytes
- * of the system address space to the PCI bus,
- * suitable to map PCI ROMS (bus address < 16M)
- * the function will return the host memory address
- * which should be converted into a bus address
- * before used to configure the PCI rom address
- * decoder
- */
-u32 pci_get_rom_window(struct pci_controller *hose, int size)
-{
-	u32 par;
-
-	par = size;
-	if (par < 0x80000) {
-		par = 0x80000;
-	}
-	par >>= 16;
-	par--;
-	par&=0x7ff;
-	par <<= 14;
-	par |= (PCI_ROM_TEMP_SPACE>>16);
-	par |= 0x72000000;
-
-	PRINTF ("setting PAR1 to %x\n", par);
-
-	/* Map rom 0x10000 with PAR1 */
-	sc520_mmcr->par[1] = par;
-
-	return PCI_ROM_TEMP_SPACE;
-}
-
-/*
- * this function removed any mapping created
- * with pci_get_rom_window()
- */
-void pci_remove_rom_window(struct pci_controller *hose, u32 addr)
-{
-	PRINTF("pci_remove_rom_window: %x", addr);
-	if (addr == PCI_ROM_TEMP_SPACE) {
-		sc520_mmcr->par[1] = 0;
-		PRINTF(" done\n");
-		return;
-	}
-	PRINTF(" not ours\n");
-
-}
-
-/*
- * This function is called in order to provide acces to the
- * legacy video I/O ports on the PCI bus.
- * After this function accesses to I/O ports 0x3b0-0x3bb and
- * 0x3c0-0x3df shuld result in transactions on the PCI bus.
- *
- */
-int pci_enable_legacy_video_ports(struct pci_controller *hose)
-{
-	/* Map video memory to 0xa0000*/
-	sc520_mmcr->par[0] = 0x7200400a;
-
-	/* forward all I/O accesses to PCI */
-	sc520_mmcr->adddecctl = sc520_mmcr->adddecctl | IO_HOLE_DEST_PCI;
-
-
-	/* so we map away all io ports to pci (only way to access pci io
-	 * below 0x400. But then we have to map back the portions that we dont
-	 * use so that the generate cycles on the GPIO bus where the sio and
-	 * ISA slots are connected, this requre the use of several PAR registers
-	 */
-
-	/* bring 0x100 - 0x1ef back to ISA using PAR5 */
-	sc520_mmcr->par[5] = 0x30ef0100;
-
-	/* IDE use 1f0-1f7 */
-
-	/* bring 0x1f8 - 0x2f7 back to ISA using PAR6 */
-	sc520_mmcr->par[6] = 0x30ff01f8;
-
-	/* com2 use 2f8-2ff */
-
-	/* bring 0x300 - 0x3af back to ISA using PAR7 */
-	sc520_mmcr->par[7] = 0x30af0300;
-
-	/* vga use 3b0-3bb */
-
-	/* bring 0x3bc - 0x3bf back to ISA using PAR8 */
-	sc520_mmcr->par[8] = 0x300303bc;
-
-	/* vga use 3c0-3df */
-
-	/* bring 0x3e0 - 0x3f5 back to ISA using PAR9 */
-	sc520_mmcr->par[9] = 0x301503e0;
-
-	/* ide use 3f6 */
-
-	/* bring 0x3f7  back to ISA using PAR10 */
-	sc520_mmcr->par[10] = 0x300003f7;
-
-	/* com1 use 3f8-3ff */
-
-	return 0;
-}