diff options
author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2014-09-29 01:37:57 +0900 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-10-10 09:44:42 -0400 |
commit | dc9617e0cee28808863cbb21f4528f89bc383923 (patch) | |
tree | 6a832d0ebd45aec45efc386a2a29f930f7839801 /board/sandburst/karef/karef.c | |
parent | 717a23b871d1563bc3a063ebceccf13a2ca2d10b (diff) | |
download | u-boot-imx-dc9617e0cee28808863cbb21f4528f89bc383923.zip u-boot-imx-dc9617e0cee28808863cbb21f4528f89bc383923.tar.gz u-boot-imx-dc9617e0cee28808863cbb21f4528f89bc383923.tar.bz2 |
powerpc: ppc4xx: remove board support for KAREF and METROBOX
These boards have been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Diffstat (limited to 'board/sandburst/karef/karef.c')
-rw-r--r-- | board/sandburst/karef/karef.c | 595 |
1 files changed, 0 insertions, 595 deletions
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c deleted file mode 100644 index 96d7dcd..0000000 --- a/board/sandburst/karef/karef.c +++ /dev/null @@ -1,595 +0,0 @@ -/* - * Copyright (C) 2005 Sandburst Corporation - * Travis B. Sawyer - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include "karef.h" -#include "karef_version.h" -#include <timestamp.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <spd_sdram.h> -#include <i2c.h> -#include "../common/sb_common.h" -#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \ - defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) -#include <net.h> -#endif - -void fpga_init (void); - -KAREF_BOARD_ID_ST board_id_as[] = -{ - {"Undefined"}, /* Not specified */ - {"Kamino Reference Design"}, - {"Reserved"}, /* Reserved for future use */ - {"Reserved"}, /* Reserved for future use */ -}; - -KAREF_BOARD_ID_ST ofem_board_id_as[] = -{ - {"Undefined"}, - {"1x10 + 10x2"}, - {"Reserved"}, - {"Reserved"}, -}; - -/************************************************************************* - * board_early_init_f - * - * Setup chip selects, initialize the Opto-FPGA, initialize - * interrupt polarity and triggers. - ************************************************************************/ -int board_early_init_f (void) -{ - ppc440_gpio_regs_t *gpio_regs; - - /* Enable GPIO interrupts */ - mtsdr(SDR0_PFC0, 0x00103E00); - - /* Setup access for LEDs, and system topology info */ - gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE; - gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS; - gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS; - - /* Turn on all the leds for now */ - gpio_regs->out = SBCOMMON_GPIO_LEDS; - - /*--------------------------------------------------------------------+ - | Initialize EBC CONFIG - +-------------------------------------------------------------------*/ - mtebc(EBC0_CFG, - EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | - EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | - EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | - EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | - EBC_CFG_PR_32); - - /*--------------------------------------------------------------------+ - | 1/2 MB FLASH. Initialize bank 0 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB0AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); - /*--------------------------------------------------------------------+ - | 8KB NVRAM/RTC. Initialize bank 1 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB1AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); - - /*--------------------------------------------------------------------+ - | Compact Flash, uses 2 Chip Selects (2 & 6) - +-------------------------------------------------------------------*/ - mtebc(PB2AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); - - /*--------------------------------------------------------------------+ - | KaRef Scan FPGA. Initialize bank 3 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB5AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48200000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - | MAC A & B for Kamino. OFEM FPGA decodes the addresses - | Initialize bank 4 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB4AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) | - EBC_BXCR_BS_2MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - | OFEM FPGA Initialize bank 5 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB3AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - - mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48400000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - - /*--------------------------------------------------------------------+ - | Compact Flash, uses 2 Chip Selects (2 & 6) - +-------------------------------------------------------------------*/ - mtebc(PB6AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); - - /*--------------------------------------------------------------------+ - | BME-32. Initialize bank 7 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB7AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - * Setup the interrupt controller polarities, triggers, etc. - +-------------------------------------------------------------------*/ - /* - * Because of the interrupt handling rework to handle 440GX interrupts - * with the common code, we needed to change names of the UIC registers. - * Here the new relationship: - * - * U-Boot name 440GX name - * ----------------------- - * UIC0 UICB0 - * UIC1 UIC0 - * UIC2 UIC1 - * UIC3 UIC2 - */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (UIC1ER, 0x00000000); /* disable all */ - mtdcr (UIC1CR, 0x00000000); /* all non- critical */ - mtdcr (UIC1PR, 0xfffffe03); /* polarity */ - mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */ - mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (UIC2ER, 0x00000000); /* disable all */ - mtdcr (UIC2CR, 0x00000000); /* all non-critical */ - mtdcr (UIC2PR, 0xffffc8ff); /* polarity */ - mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */ - mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (UIC3ER, 0x00000000); /* disable all */ - mtdcr (UIC3CR, 0x00000000); /* all non-critical */ - mtdcr (UIC3PR, 0xffff83ff); /* polarity */ - mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */ - mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - - mtdcr (UIC0SR, 0xfc000000); /* clear all */ - mtdcr (UIC0ER, 0x00000000); /* disable all */ - mtdcr (UIC0CR, 0x00000000); /* all non-critical */ - mtdcr (UIC0PR, 0xfc000000); - mtdcr (UIC0TR, 0x00000000); - mtdcr (UIC0VR, 0x00000001); - - fpga_init(); - - return 0; -} - - -/************************************************************************* - * checkboard - * - * Dump pertinent info to the console - ************************************************************************/ -int checkboard (void) -{ - sys_info_t sysinfo; - unsigned char brd_rev, brd_id; - unsigned short sernum; - unsigned char scan_rev, scan_id, ofem_rev=0, ofem_id=0; - unsigned char ofem_brd_rev, ofem_brd_id; - KAREF_FPGA_REGS_ST *karef_ps; - OFEM_FPGA_REGS_ST *ofem_ps; - - karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; - ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE; - - scan_id = (unsigned char)((karef_ps->revision_ul & - SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK) - >> SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT); - - scan_rev = (unsigned char)((karef_ps->revision_ul & SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK) - >> SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT); - - brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT); - - brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT); - - ofem_brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT); - - ofem_brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT); - - if (0xF != ofem_brd_id) { - ofem_id = (unsigned char)((ofem_ps->revision_ul & - SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK) - >> SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT); - - ofem_rev = (unsigned char)((ofem_ps->revision_ul & - SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK) - >> SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT); - } - - get_sys_info (&sysinfo); - - sernum = sbcommon_get_serial_number(); - - printf ("Board: Sandburst Corporation Kamino Reference Design " - "Serial Number: %d\n", sernum); - printf ("%s\n", KAREF_U_BOOT_REL_STR); - - printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER); - if (sbcommon_get_master()) { - printf("Slot 0 - Master\nSlave board"); - if (sbcommon_secondary_present()) - printf(" present\n"); - else - printf(" not detected\n"); - } else { - printf("Slot 1 - Slave\n\n"); - } - - printf ("ScanFPGA ID:\t0x%02X\tRev: 0x%02X\n", scan_id, scan_rev); - printf ("Board Rev:\t0x%02X\tID: 0x%02X\n", brd_rev, brd_id); - if(0xF != ofem_brd_id) { - printf("OFemFPGA ID:\t0x%02X\tRev: 0x%02X\n", ofem_id, ofem_rev); - printf("OFEM Board Rev:\t0x%02X\tID: 0x%02X\n", ofem_brd_id, ofem_brd_rev); - } - - /* Fix the ack in the bme 32 */ - udelay(5000); - out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001); - asm("eieio"); - - - return (0); -} - -/************************************************************************* - * misc_init_f - * - * Initialize I2C bus one to gain access to the fans - ************************************************************************/ -int misc_init_f (void) -{ - /* Turn on fans 3 & 4 */ - sbcommon_fans(); - - return (0); -} - -/************************************************************************* - * misc_init_r - * - * Do nothing. - ************************************************************************/ -int misc_init_r (void) -{ - unsigned short sernum; - char envstr[255]; - uchar enetaddr[6]; - KAREF_FPGA_REGS_ST *karef_ps; - OFEM_FPGA_REGS_ST *ofem_ps; - - if(NULL != getenv("secondserial")) { - puts("secondserial is set, switching to second serial port\n"); - setenv("stderr", "serial1"); - setenv("stdout", "serial1"); - setenv("stdin", "serial1"); - } - - setenv("ubrelver", KAREF_U_BOOT_REL_STR); - - memset(envstr, 0, 255); - sprintf (envstr, "Built %s %s by %s", - U_BOOT_DATE, U_BOOT_TIME, BUILDUSER); - setenv("bldstr", envstr); - saveenv(); - - if( getenv("autorecover")) { - setenv("autorecover", NULL); - saveenv(); - sernum = sbcommon_get_serial_number(); - - printf("\nSetting up environment for automatic filesystem recovery\n"); - /* - * Setup default bootargs - */ - memset(envstr, 0, 255); - - sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 " - "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33", - sernum, sernum); - setenv("bootargs", envstr); - - /* - * Setup Default boot command - */ - setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;" - "fatload ide 0 8100000 pramdisk;" - "bootm 8000000 8100000"); - - printf("Done. Please type allow the system to continue to boot\n"); - } - - if( getenv("fakeled")) { - karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; - ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE; - ofem_ps->control_ul &= ~SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK; - karef_ps->control_ul &= ~SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK; - setenv("bootdelay", "-1"); - saveenv(); - printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n"); - } - -#ifdef CONFIG_HAS_ETH0 - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(0, enetaddr); - eth_setenv_enetaddr("ethaddr", enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH1 - if (!eth_getenv_enetaddr("eth1addr", enetaddr)) { - board_get_enetaddr(1, enetaddr); - eth_setenv_enetaddr("eth1addr", enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH2 - if (!eth_getenv_enetaddr("eth2addr", enetaddr)) { - board_get_enetaddr(2, enetaddr); - eth_setenv_enetaddr("eth2addr", enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH3 - if (!eth_getenv_enetaddr("eth3addr", enetaddr)) { - board_get_enetaddr(3, enetaddr); - eth_setenv_enetaddr("eth3addr", enetaddr); - } -#endif - - return (0); -} - -/************************************************************************* - * ide_set_reset - ************************************************************************/ -#ifdef CONFIG_IDE_RESET -void ide_set_reset(int on) -{ - KAREF_FPGA_REGS_ST *karef_ps; - /* TODO: ide reset */ - karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; - - if (on) { - karef_ps->reset_ul &= ~SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK; - } else { - karef_ps->reset_ul |= SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK; - } -} -#endif /* CONFIG_IDE_RESET */ - -/************************************************************************* - * fpga_init - ************************************************************************/ -void fpga_init(void) -{ - KAREF_FPGA_REGS_ST *karef_ps; - OFEM_FPGA_REGS_ST *ofem_ps; - unsigned char ofem_id; - unsigned long tmp; - - /* Ensure we have power all around */ - udelay(500); - - karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; - tmp = - SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK; - - karef_ps->reset_ul = tmp; - - /* - * Wait a bit to allow the ofem fpga to get its brains - */ - udelay(5000); - - /* - * Check to see if the ofem is there - */ - ofem_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT); - if(0xF != ofem_id) { - tmp = - SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK | - SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK | - SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK; - - ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE; - ofem_ps->reset_ul = tmp; - - ofem_ps->control_ul |= 1 < SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT; - } - - karef_ps->control_ul |= 1 << SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT; - - asm("eieio"); - - return; -} - -int karefSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned short sernum; - char envstr[255]; - - sernum = sbcommon_get_serial_number(); - - memset(envstr, 0, 255); - /* - * Setup our ip address - */ - sprintf(envstr, "10.100.70.%d", sernum); - - setenv("ipaddr", envstr); - /* - * Setup the host ip address - */ - setenv("serverip", "10.100.17.10"); - - /* - * Setup default bootargs - */ - memset(envstr, 0, 255); - - sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs " - "rw nfsroot=10.100.17.10:/home/metrobox/mbc70.%d " - "nfsaddrs=10.100.70.%d:10.100.17.10:10.100.1.1:" - "255.255.0.0:karef%d.sandburst.com:eth0:none idebus=33", - sernum, sernum, sernum); - - setenv("bootargs_nfs", envstr); - setenv("bootargs", envstr); - - /* - * Setup CF bootargs - */ - memset(envstr, 0, 255); - - sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 " - "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33", - sernum, sernum); - - setenv("bootargs_cf", envstr); - - /* - * Setup Default boot command - */ - setenv("bootcmd_tftp", "tftp 8000000 uImage.karef;bootm 8000000"); - setenv("bootcmd", "tftp 8000000 uImage.karef;bootm 8000000"); - - /* - * Setup compact flash boot command - */ - setenv("bootcmd_cf", "fatload ide 0 8000000 uimage.karef;bootm 8000000"); - - saveenv(); - - return(1); -} - -int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned short sernum; - char envstr[255]; - - sernum = sbcommon_get_serial_number(); - - printf("\nSetting up environment for filesystem recovery\n"); - /* - * Setup default bootargs - */ - memset(envstr, 0, 255); - - sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 " - "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none", - sernum, sernum); - setenv("bootargs", envstr); - - /* - * Setup Default boot command - */ - - setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;" - "fatload ide 0 8100000 pramdisk;" - "bootm 8000000 8100000"); - - printf("Done. Please type boot<cr>.\nWhen the kernel has booted" - " please type fsrecover.sh<cr>\n"); - - return(1); -} - -U_BOOT_CMD(kasetup, 1, 1, karefSetupVars, - "Set environment to factory defaults", ""); - -U_BOOT_CMD(karecover, 1, 1, karefRecover, - "Set environment to allow for fs recovery", ""); |