summaryrefslogtreecommitdiff
path: root/board/sandburst/common
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2013-07-24 09:22:28 -0400
committerTom Rini <trini@ti.com>2013-07-24 09:50:24 -0400
commitc2120fbfbc4d1f6953228f86be8bdbf38bacfdab (patch)
tree14cd8ec9a0a61f7113149be38d79808cd5e955f8 /board/sandburst/common
parente85427fd66a21b39145a47e67871a8863c0e5591 (diff)
parentecbd7e1ec7280d90d151a99691f74b892588cadd (diff)
downloadu-boot-imx-c2120fbfbc4d1f6953228f86be8bdbf38bacfdab.zip
u-boot-imx-c2120fbfbc4d1f6953228f86be8bdbf38bacfdab.tar.gz
u-boot-imx-c2120fbfbc4d1f6953228f86be8bdbf38bacfdab.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-i2c
The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'board/sandburst/common')
-rw-r--r--board/sandburst/common/ppc440gx_i2c.c494
-rw-r--r--board/sandburst/common/ppc440gx_i2c.h44
-rw-r--r--board/sandburst/common/sb_common.c103
-rw-r--r--board/sandburst/common/sb_common.h1
4 files changed, 52 insertions, 590 deletions
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
deleted file mode 100644
index 1d7f17c..0000000
--- a/board/sandburst/common/ppc440gx_i2c.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- * Copyright (C) 2005 Sandburst Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Ported from arch/powerpc/cpu/ppc4xx/i2c.c by AS HARNOIS by
- * Travis B. Sawyer
- * Sandburst Corporation.
- */
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc4xx-i2c.h>
-#include <i2c.h>
-#include <command.h>
-#include "ppc440gx_i2c.h"
-#include <asm/io.h>
-
-#ifdef CONFIG_I2C_BUS1
-
-#define IIC_OK 0
-#define IIC_NOK 1
-#define IIC_NOK_LA 2 /* Lost arbitration */
-#define IIC_NOK_ICT 3 /* Incomplete transfer */
-#define IIC_NOK_XFRA 4 /* Transfer aborted */
-#define IIC_NOK_DATA 5 /* No data in buffer */
-#define IIC_NOK_TOUT 6 /* Transfer timeout */
-
-#define IIC_TIMEOUT 1 /* 1 second */
-#if defined(CONFIG_SYS_I2C_NOPROBES)
-static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
-#endif
-
-static struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_REGISTERS_BUS1_BASE_ADDRESS;
-
-static void _i2c_bus1_reset (void)
-{
- int i, status;
-
- /* Reset status register */
- /* write 1 in SCMP and IRQA to clear these fields */
- out_8 (IIC_STS1, 0x0A);
-
- /* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
- out_8 (IIC_EXTSTS1, 0x8F);
- __asm__ volatile ("eieio");
-
- /*
- * Get current state, reset bus
- * only if no transfers are pending.
- */
- i = 10;
- do {
- /* Get status */
- status = in_8 (IIC_STS1);
- udelay (500); /* 500us */
- i--;
- } while ((status & IIC_STS_PT) && (i > 0));
- /* Soft reset controller */
- status = in_8 (IIC_XTCNTLSS1);
- out_8 (IIC_XTCNTLSS1, (status | IIC_XTCNTLSS_SRST));
- __asm__ volatile ("eieio");
-
- /* make sure where in initial state, data hi, clock hi */
- out_8 (IIC_DIRECTCNTL1, 0xC);
- for (i = 0; i < 10; i++) {
- if ((in_8 (IIC_DIRECTCNTL1) & 0x3) != 0x3) {
- /* clock until we get to known state */
- out_8 (IIC_DIRECTCNTL1, 0x8); /* clock lo */
- udelay (100); /* 100us */
- out_8 (IIC_DIRECTCNTL1, 0xC); /* clock hi */
- udelay (100); /* 100us */
- } else {
- break;
- }
- }
- /* send start condition */
- out_8 (IIC_DIRECTCNTL1, 0x4);
- udelay (1000); /* 1ms */
- /* send stop condition */
- out_8 (IIC_DIRECTCNTL1, 0xC);
- udelay (1000); /* 1ms */
- /* Unreset controller */
- out_8 (IIC_XTCNTLSS1, (status & ~IIC_XTCNTLSS_SRST));
- udelay (1000); /* 1ms */
-}
-
-void i2c1_init (int speed, int slaveadd)
-{
- sys_info_t sysInfo;
- unsigned long freqOPB;
- int val, divisor;
-
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
- /* call board specific i2c bus reset routine before accessing the */
- /* environment, which might be in a chip on that bus. For details */
- /* about this problem see doc/I2C_Edge_Conditions. */
- i2c_init_board();
-#endif
-
- /* Handle possible failed I2C state */
- /* FIXME: put this into i2c_init_board()? */
- _i2c_bus1_reset ();
-
- /* clear lo master address */
- out_8 (IIC_LMADR1, 0);
-
- /* clear hi master address */
- out_8 (IIC_HMADR1, 0);
-
- /* clear lo slave address */
- out_8 (IIC_LSADR1, 0);
-
- /* clear hi slave address */
- out_8 (IIC_HSADR1, 0);
-
- /* Clock divide Register */
- /* get OPB frequency */
- get_sys_info (&sysInfo);
- freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
- /* set divisor according to freqOPB */
- divisor = (freqOPB - 1) / 10000000;
- if (divisor == 0)
- divisor = 1;
- out_8 (IIC_CLKDIV1, divisor);
-
- /* no interrupts */
- out_8 (IIC_INTRMSK1, 0);
-
- /* clear transfer count */
- out_8 (IIC_XFRCNT1, 0);
-
- /* clear extended control & stat */
- /* write 1 in SRC SRS SWC SWS to clear these fields */
- out_8 (IIC_XTCNTLSS1, 0xF0);
-
- /* Mode Control Register
- Flush Slave/Master data buffer */
- out_8 (IIC_MDCNTL1, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
- __asm__ volatile ("eieio");
-
-
- val = in_8(IIC_MDCNTL1);
- __asm__ volatile ("eieio");
-
- /* Ignore General Call, slave transfers are ignored,
- disable interrupts, exit unknown bus state, enable hold
- SCL
- 100kHz normaly or FastMode for 400kHz and above
- */
-
- val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL;
- if( speed >= 400000 ){
- val |= IIC_MDCNTL_FSM;
- }
- out_8 (IIC_MDCNTL1, val);
-
- /* clear control reg */
- out_8 (IIC_CNTL1, 0x00);
- __asm__ volatile ("eieio");
-
-}
-
-/*
- This code tries to use the features of the 405GP i2c
- controller. It will transfer up to 4 bytes in one pass
- on the loop. It only does out_8(lbz) to the buffer when it
- is possible to do out16(lhz) transfers.
-
- cmd_type is 0 for write 1 for read.
-
- addr_len can take any value from 0-255, it is only limited
- by the char, we could make it larger if needed. If it is
- 0 we skip the address write cycle.
-
- Typical case is a Write of an addr followd by a Read. The
- IBM FAQ does not cover this. On the last byte of the write
- we don't set the creg CHT bit, and on the first bytes of the
- read we set the RPST bit.
-
- It does not support address only transfers, there must be
- a data part. If you want to write the address yourself, put
- it in the data pointer.
-
- It does not support transfer to/from address 0.
-
- It does not check XFRCNT.
-*/
-static
-int i2c_transfer1(unsigned char cmd_type,
- unsigned char chip,
- unsigned char addr[],
- unsigned char addr_len,
- unsigned char data[],
- unsigned short data_len )
-{
- unsigned char* ptr;
- int reading;
- int tran,cnt;
- int result;
- int status;
- int i;
- uchar creg;
-
- if( data == 0 || data_len == 0 ){
- /*Don't support data transfer of no length or to address 0*/
- printf( "i2c_transfer: bad call\n" );
- return IIC_NOK;
- }
- if( addr && addr_len ){
- ptr = addr;
- cnt = addr_len;
- reading = 0;
- }else{
- ptr = data;
- cnt = data_len;
- reading = cmd_type;
- }
-
- /*Clear Stop Complete Bit*/
- out_8(IIC_STS1,IIC_STS_SCMP);
- /* Check init */
- i=10;
- do {
- /* Get status */
- status = in_8(IIC_STS1);
- __asm__ volatile("eieio");
- i--;
- } while ((status & IIC_STS_PT) && (i>0));
-
- if (status & IIC_STS_PT) {
- result = IIC_NOK_TOUT;
- return(result);
- }
- /*flush the Master/Slave Databuffers*/
- out_8(IIC_MDCNTL1, ((in_8(IIC_MDCNTL1))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
- /*need to wait 4 OPB clocks? code below should take that long*/
-
- /* 7-bit adressing */
- out_8(IIC_HMADR1,0);
- out_8(IIC_LMADR1, chip);
- __asm__ volatile("eieio");
-
- tran = 0;
- result = IIC_OK;
- creg = 0;
-
- while ( tran != cnt && (result == IIC_OK)) {
- int bc,j;
-
- /* Control register =
- Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start,
- Transfer is a sequence of transfers
- */
- creg |= IIC_CNTL_PT;
-
- bc = (cnt - tran) > 4 ? 4 :
- cnt - tran;
- creg |= (bc-1)<<4;
- /* if the real cmd type is write continue trans*/
- if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) )
- creg |= IIC_CNTL_CHT;
-
- if (reading)
- creg |= IIC_CNTL_READ;
- else {
- for(j=0; j<bc; j++) {
- /* Set buffer */
- out_8(IIC_MDBUF1,ptr[tran+j]);
- __asm__ volatile("eieio");
- }
- }
- out_8(IIC_CNTL1, creg );
- __asm__ volatile("eieio");
-
- /* Transfer is in progress
- we have to wait for upto 5 bytes of data
- 1 byte chip address+r/w bit then bc bytes
- of data.
- udelay(10) is 1 bit time at 100khz
- Doubled for slop. 20 is too small.
- */
- i=2*5*8;
- do {
- /* Get status */
- status = in_8(IIC_STS1);
- __asm__ volatile("eieio");
- udelay (10);
- i--;
- } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR)
- && (i>0));
-
- if (status & IIC_STS_ERR) {
- result = IIC_NOK;
- status = in_8 (IIC_EXTSTS1);
- /* Lost arbitration? */
- if (status & IIC_EXTSTS_LA)
- result = IIC_NOK_LA;
- /* Incomplete transfer? */
- if (status & IIC_EXTSTS_ICT)
- result = IIC_NOK_ICT;
- /* Transfer aborted? */
- if (status & IIC_EXTSTS_XFRA)
- result = IIC_NOK_XFRA;
- } else if ( status & IIC_STS_PT) {
- result = IIC_NOK_TOUT;
- }
- /* Command is reading => get buffer */
- if ((reading) && (result == IIC_OK)) {
- /* Are there data in buffer */
- if (status & IIC_STS_MDBS) {
- /*
- even if we have data we have to wait 4OPB clocks
- for it to hit the front of the FIFO, after that
- we can just read. We should check XFCNT here and
- if the FIFO is full there is no need to wait.
- */
- udelay (1);
- for(j=0;j<bc;j++) {
- ptr[tran+j] = in_8(IIC_MDBUF1);
- __asm__ volatile("eieio");
- }
- } else
- result = IIC_NOK_DATA;
- }
- creg = 0;
- tran+=bc;
- if( ptr == addr && tran == cnt ) {
- ptr = data;
- cnt = data_len;
- tran = 0;
- reading = cmd_type;
- if( reading )
- creg = IIC_CNTL_RPST;
- }
- }
- return (result);
-}
-
-int i2c_probe1 (uchar chip)
-{
- uchar buf[1];
-
- buf[0] = 0;
-
- /*
- * What is needed is to send the chip address and verify that the
- * address was <ACK>ed (i.e. there was a chip at that address which
- * drove the data line low).
- */
- return(i2c_transfer1 (1, chip << 1, 0,0, buf, 1) != 0);
-}
-
-
-int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
- uchar xaddr[4];
- int ret;
-
- if ( alen > 4 ) {
- printf ("I2C read: addr len %d not supported\n", alen);
- return 1;
- }
-
- if ( alen > 0 ) {
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
- }
-
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
- * address and the extra bits end up in the "chip address"
- * bit slots. This makes a 24WC08 (1Kbyte) chip look like
- * four 256 byte chips.
- *
- * Note that we consider the length of the address field to
- * still be one byte because the extra address bits are
- * hidden in the chip address.
- */
- if( alen > 0 )
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
- if( (ret = i2c_transfer1( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
- printf( "I2c read: failed %d\n", ret);
- return 1;
- }
- return 0;
-}
-
-int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
- uchar xaddr[4];
-
- if ( alen > 4 ) {
- printf ("I2C write: addr len %d not supported\n", alen);
- return 1;
-
- }
- if ( alen > 0 ) {
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
- }
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
- * address and the extra bits end up in the "chip address"
- * bit slots. This makes a 24WC08 (1Kbyte) chip look like
- * four 256 byte chips.
- *
- * Note that we consider the length of the address field to
- * still be one byte because the extra address bits are
- * hidden in the chip address.
- */
- if( alen > 0 )
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
- return (i2c_transfer1( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
-}
-
-/*-----------------------------------------------------------------------
- * Read a register
- */
-uchar i2c_reg_read1(uchar i2c_addr, uchar reg)
-{
- uchar buf;
-
- i2c_read1(i2c_addr, reg, 1, &buf, (uchar)1);
-
- return(buf);
-}
-
-/*-----------------------------------------------------------------------
- * Write a register
- */
-void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val)
-{
- i2c_write1(i2c_addr, reg, 1, &val, 1);
-}
-
-
-int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int j;
-#if defined(CONFIG_SYS_I2C_NOPROBES)
- int k, skip;
-#endif
-
- puts ("Valid chip addresses:");
- for(j = 0; j < 128; j++) {
-#if defined(CONFIG_SYS_I2C_NOPROBES)
- skip = 0;
- for (k = 0; k < sizeof(i2c_no_probes); k++){
- if (j == i2c_no_probes[k]){
- skip = 1;
- break;
- }
- }
- if (skip)
- continue;
-#endif
- if(i2c_probe1(j) == 0) {
- printf(" %02X", j);
- }
- }
- putc ('\n');
-
-#if defined(CONFIG_SYS_I2C_NOPROBES)
- puts ("Excluded chip addresses:");
- for( k = 0; k < sizeof(i2c_no_probes); k++ )
- printf(" %02X", i2c_no_probes[k] );
- putc ('\n');
-#endif
-
- return 0;
-}
-
-U_BOOT_CMD(
- iprobe1, 1, 1, do_i2c1_probe,
- "probe to discover valid I2C chip addresses",
- ""
-);
-
-#endif /* CONFIG_I2C_BUS1 */
diff --git a/board/sandburst/common/ppc440gx_i2c.h b/board/sandburst/common/ppc440gx_i2c.h
deleted file mode 100644
index b1179bc..0000000
--- a/board/sandburst/common/ppc440gx_i2c.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2005 Sandburst Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Ported from i2c driver for ppc4xx by AS HARNOIS by
- * Travis B. Sawyer
- * Sandburst Corporation
- */
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc4xx-i2c.h>
-#include <i2c.h>
-
-#ifdef CONFIG_HARD_I2C
-
-#define I2C_BUS1_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
-#define I2C_REGISTERS_BUS1_BASE_ADDRESS I2C_BUS1_BASE_ADDR
-#define IIC_MDBUF1 (&i2c->mdbuf)
-#define IIC_SDBUF1 (&i2c->sdbuf)
-#define IIC_LMADR1 (&i2c->lmadr)
-#define IIC_HMADR1 (&i2c->hmadr)
-#define IIC_CNTL1 (&i2c->cntl)
-#define IIC_MDCNTL1 (&i2c->mdcntl)
-#define IIC_STS1 (&i2c->sts)
-#define IIC_EXTSTS1 (&i2c->extsts)
-#define IIC_LSADR1 (&i2c->lsadr)
-#define IIC_HSADR1 (&i2c->hsadr)
-#define IIC_CLKDIV1 (&i2c->clkdiv)
-#define IIC_INTRMSK1 (&i2c->intrmsk)
-#define IIC_XFRCNT1 (&i2c->xfrcnt)
-#define IIC_XTCNTLSS1 (&i2c->xtcntlss)
-#define IIC_DIRECTCNTL1 (&i2c->directcntl)
-
-void i2c1_init (int speed, int slaveadd);
-int i2c_probe1 (uchar chip);
-int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len);
-int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len);
-uchar i2c_reg_read1(uchar i2c_addr, uchar reg);
-void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val);
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
index 12334df..b579812 100644
--- a/board/sandburst/common/sb_common.c
+++ b/board/sandburst/common/sb_common.c
@@ -10,7 +10,6 @@
#include <asm/io.h>
#include <spd_sdram.h>
#include <i2c.h>
-#include "ppc440gx_i2c.h"
#include "sb_common.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -68,7 +67,7 @@ unsigned short sbcommon_get_serial_number(void)
/* Get the board serial number from eeprom */
/* Initialize I2C */
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_set_bus_num(0);
/* Read 256 bytes in EEPROM */
i2c_read (0x50, 0, 1, buff, 0x100);
@@ -94,85 +93,87 @@ void sbcommon_fans(void)
* Attempt to turn on 2 of the fans...
* Need to go through the bridge
*/
+ i2c_set_bus_num(1);
puts ("FANS: ");
/* select fan4 through the bridge */
- i2c_reg_write1(0x73, /* addr */
- 0x00, /* reg */
- 0x08); /* val = bus 4 */
+ i2c_reg_write(0x73, /* addr */
+ 0x00, /* reg */
+ 0x08); /* val = bus 4 */
/* Turn on FAN 4 */
- i2c_reg_write1(0x2e,
- 1,
- 0x80);
+ i2c_reg_write(0x2e,
+ 1,
+ 0x80);
- i2c_reg_write1(0x2e,
- 0,
- 0x19);
+ i2c_reg_write(0x2e,
+ 0,
+ 0x19);
/* Deselect bus 4 on the bridge */
- i2c_reg_write1(0x73,
- 0x00,
- 0x00);
+ i2c_reg_write(0x73,
+ 0x00,
+ 0x00);
/* select fan3 through the bridge */
- i2c_reg_write1(0x73, /* addr */
- 0x00, /* reg */
- 0x04); /* val = bus 3 */
+ i2c_reg_write(0x73, /* addr */
+ 0x00, /* reg */
+ 0x04); /* val = bus 3 */
/* Turn on FAN 3 */
- i2c_reg_write1(0x2e,
- 1,
- 0x80);
+ i2c_reg_write(0x2e,
+ 1,
+ 0x80);
- i2c_reg_write1(0x2e,
- 0,
- 0x19);
+ i2c_reg_write(0x2e,
+ 0,
+ 0x19);
/* Deselect bus 3 on the bridge */
- i2c_reg_write1(0x73,
- 0x00,
- 0x00);
+ i2c_reg_write(0x73,
+ 0x00,
+ 0x00);
/* select fan2 through the bridge */
- i2c_reg_write1(0x73, /* addr */
- 0x00, /* reg */
- 0x02); /* val = bus 4 */
+ i2c_reg_write(0x73, /* addr */
+ 0x00, /* reg */
+ 0x02); /* val = bus 4 */
/* Turn on FAN 2 */
- i2c_reg_write1(0x2e,
- 1,
- 0x80);
+ i2c_reg_write(0x2e,
+ 1,
+ 0x80);
- i2c_reg_write1(0x2e,
- 0,
- 0x19);
+ i2c_reg_write(0x2e,
+ 0,
+ 0x19);
/* Deselect bus 2 on the bridge */
- i2c_reg_write1(0x73,
- 0x00,
- 0x00);
+ i2c_reg_write(0x73,
+ 0x00,
+ 0x00);
/* select fan1 through the bridge */
- i2c_reg_write1(0x73, /* addr */
- 0x00, /* reg */
- 0x01); /* val = bus 0 */
+ i2c_reg_write(0x73, /* addr */
+ 0x00, /* reg */
+ 0x01); /* val = bus 0 */
/* Turn on FAN 1 */
- i2c_reg_write1(0x2e,
- 1,
- 0x80);
+ i2c_reg_write(0x2e,
+ 1,
+ 0x80);
- i2c_reg_write1(0x2e,
- 0,
- 0x19);
+ i2c_reg_write(0x2e,
+ 0,
+ 0x19);
/* Deselect bus 1 on the bridge */
- i2c_reg_write1(0x73,
- 0x00,
- 0x00);
+ i2c_reg_write(0x73,
+ 0x00,
+ 0x00);
puts ("on\n");
+ i2c_set_bus_num(0);
return;
@@ -303,7 +304,7 @@ void board_get_enetaddr(int macaddr_idx, uchar *enet)
if (0 == macaddr_idx) {
/* Initialize I2C */
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_set_bus_num(0);
/* Read 256 bytes in EEPROM */
i2c_read (0x50, 0, 1, buff, 0x100);
diff --git a/board/sandburst/common/sb_common.h b/board/sandburst/common/sb_common.h
index c86061c..8716eac 100644
--- a/board/sandburst/common/sb_common.h
+++ b/board/sandburst/common/sb_common.h
@@ -12,7 +12,6 @@
#include <asm/io.h>
#include <spd_sdram.h>
#include <i2c.h>
-#include "ppc440gx_i2c.h"
/*
* GPIO Settings