summaryrefslogtreecommitdiff
path: root/board/samsung
diff options
context:
space:
mode:
authorAkshay Saraswat <akshay.s@samsung.com>2014-05-13 10:30:14 +0530
committerMinkyu Kang <mk7.kang@samsung.com>2014-05-13 15:20:38 +0900
commitf6ae1ca05839f92b103aaa0743d1d0012ba9773d (patch)
tree808b8a627cffc6cff4679bd1d2e94391e41ad588 /board/samsung
parentbfbc47cc9fcbdb67067c20164aece775c2e2603b (diff)
downloadu-boot-imx-f6ae1ca05839f92b103aaa0743d1d0012ba9773d.zip
u-boot-imx-f6ae1ca05839f92b103aaa0743d1d0012ba9773d.tar.gz
u-boot-imx-f6ae1ca05839f92b103aaa0743d1d0012ba9773d.tar.bz2
S5P: Exynos: Add GPIO pin numbering and rename definitions
This patch includes following changes : * Adds gpio pin numbering support for EXYNOS SOCs. To have consistent 0..n-1 GPIO numbering the banks are divided into different parts where ever they have holes in them. * Rename GPIO definitions from GPIO_... to S5P_GPIO_... These changes were done to enable cmd_gpio for EXYNOS and cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence getting a error during compilation. * Adds support for name to gpio conversion in s5p_gpio to enable gpio command EXYNOS SoCs. Function has been added to asm/gpio.h to decode the input gpio name to gpio number. Example: SMDK5420 # gpio set gpa00 Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Diffstat (limited to 'board/samsung')
-rw-r--r--board/samsung/arndale/arndale.c11
-rw-r--r--board/samsung/goni/goni.c32
-rw-r--r--board/samsung/smdk5250/exynos5-dt.c20
-rw-r--r--board/samsung/smdk5250/smdk5250.c19
-rw-r--r--board/samsung/smdk5420/smdk5420.c15
-rw-r--r--board/samsung/smdkc100/smdkc100.c5
-rw-r--r--board/samsung/smdkv310/smdkv310.c19
-rw-r--r--board/samsung/trats/trats.c39
-rw-r--r--board/samsung/trats2/trats2.c74
-rw-r--r--board/samsung/universal_c210/universal.c51
10 files changed, 112 insertions, 173 deletions
diff --git a/board/samsung/arndale/arndale.c b/board/samsung/arndale/arndale.c
index 9efc355..ef88314 100644
--- a/board/samsung/arndale/arndale.c
+++ b/board/samsung/arndale/arndale.c
@@ -16,17 +16,14 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_USB_EHCI_EXYNOS
int board_usb_init(int index, enum usb_init_type init)
{
- struct exynos5_gpio_part1 *gpio = (struct exynos5_gpio_part1 *)
- samsung_get_base_gpio_part1();
-
/* Configure gpios for usb 3503 hub:
* disconnect, toggle reset and connect
*/
- s5p_gpio_direction_output(&gpio->d1, 7, 0);
- s5p_gpio_direction_output(&gpio->x3, 5, 0);
+ gpio_direction_output(EXYNOS5_GPIO_D17, 0);
+ gpio_direction_output(EXYNOS5_GPIO_X35, 0);
- s5p_gpio_direction_output(&gpio->x3, 5, 1);
- s5p_gpio_direction_output(&gpio->d1, 7, 1);
+ gpio_direction_output(EXYNOS5_GPIO_X35, 1);
+ gpio_direction_output(EXYNOS5_GPIO_D17, 1);
return 0;
}
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 61b9ece..4cea63b 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -17,8 +17,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static struct s5pc110_gpio *s5pc110_gpio;
-
u32 get_board_rev(void)
{
return 0;
@@ -27,8 +25,6 @@ u32 get_board_rev(void)
int board_init(void)
{
/* Set Initial global variables */
- s5pc110_gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
-
gd->bd->bi_arch_number = MACH_TYPE_GONI;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
@@ -82,7 +78,7 @@ int board_mmc_init(bd_t *bis)
int i, ret, ret_sd = 0;
/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
- s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
+ gpio_direction_output(S5PC110_GPIO_J27, 1);
/*
* MMC0 GPIO
@@ -91,15 +87,15 @@ int board_mmc_init(bd_t *bis)
* GPG0[2] SD_0_CDn -> Not used
* GPG0[3:6] SD_0_DATA[0:3]
*/
- for (i = 0; i < 7; i++) {
- if (i == 2)
+ for (i = S5PC110_GPIO_G00; i < S5PC110_GPIO_G07; i++) {
+ if (i == S5PC110_GPIO_G02)
continue;
/* GPG0[0:6] special function 2 */
- s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
+ gpio_cfg_pin(i, 0x2);
/* GPG0[0:6] pull disable */
- s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
/* GPG0[0:6] drv 4x */
- s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
ret = s5p_mmc_init(0, 4);
@@ -110,20 +106,20 @@ int board_mmc_init(bd_t *bis)
* SD card (T_FLASH) detect and init
* T_FLASH_DETECT: EINT28: GPH3[4] input mode
*/
- s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT);
- s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP);
+ gpio_cfg_pin(S5PC110_GPIO_H34, S5P_GPIO_INPUT);
+ gpio_set_pull(S5PC110_GPIO_H34, S5P_GPIO_PULL_UP);
- if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) {
- for (i = 0; i < 7; i++) {
- if (i == 2)
+ if (!gpio_get_value(S5PC110_GPIO_H34)) {
+ for (i = S5PC110_GPIO_G20; i < S5PC110_GPIO_G27; i++) {
+ if (i == S5PC110_GPIO_G22)
continue;
/* GPG2[0:6] special function 2 */
- s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2);
+ gpio_cfg_pin(i, 0x2);
/* GPG2[0:6] pull disable */
- s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
/* GPG2[0:6] drv 4x */
- s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
ret_sd = s5p_mmc_init(2, 4);
diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c
index 379a45c..58821c4 100644
--- a/board/samsung/smdk5250/exynos5-dt.c
+++ b/board/samsung/smdk5250/exynos5-dt.c
@@ -27,12 +27,9 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SOUND_MAX98095
static void board_enable_audio_codec(void)
{
- struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
- samsung_get_base_gpio_part1();
-
/* Enable MAX98095 Codec */
- s5p_gpio_direction_output(&gpio1->x1, 7, 1);
- s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS5_GPIO_X17, 1);
+ gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
}
#endif
@@ -47,19 +44,16 @@ int exynos_init(void)
#ifdef CONFIG_LCD
void exynos_cfg_lcd_gpio(void)
{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
-
/* For Backlight */
- s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->b2, 0, 1);
+ gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5_GPIO_B20, 1);
/* LCD power on */
- s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->x1, 5, 1);
+ gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5_GPIO_X15, 1);
/* Set Hotplug detect for DP */
- s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
}
void exynos_set_dp_phy(unsigned int onoff)
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 28a6d9e..014b7bd 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -29,12 +29,9 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SOUND_MAX98095
static void board_enable_audio_codec(void)
{
- struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
- samsung_get_base_gpio_part1();
-
/* Enable MAX98095 Codec */
- s5p_gpio_direction_output(&gpio1->x1, 7, 1);
- s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS5_GPIO_X17, 1);
+ gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
}
#endif
@@ -275,19 +272,17 @@ int exynos_power_init(void)
#ifdef CONFIG_LCD
void exynos_cfg_lcd_gpio(void)
{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
/* For Backlight */
- s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->b2, 0, 1);
+ gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5_GPIO_B20, 1);
/* LCD power on */
- s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->x1, 5, 1);
+ gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5_GPIO_X15, 1);
/* Set Hotplug detect for DP */
- s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
}
void exynos_set_dp_phy(unsigned int onoff)
diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c
index e4606ec..9207522 100644
--- a/board/samsung/smdk5420/smdk5420.c
+++ b/board/samsung/smdk5420/smdk5420.c
@@ -21,11 +21,8 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_USB_EHCI_EXYNOS
static int board_usb_vbus_init(void)
{
- struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
- samsung_get_base_gpio_part1();
-
/* Enable VBUS power switch */
- s5p_gpio_direction_output(&gpio1->x2, 6, 1);
+ gpio_direction_output(EXYNOS5420_GPIO_X26, 1);
/* VBUS turn ON time */
mdelay(3);
@@ -49,15 +46,15 @@ void cfg_lcd_gpio(void)
(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
/* For Backlight */
- s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->b2, 0, 1);
+ gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5420_GPIO_B20, 1);
/* LCD power on */
- s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->x1, 5, 1);
+ gpio_cfg_pin(EXYNOS5420_GPIO_X15, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5420_GPIO_X15, 1);
/* Set Hotplug detect for DP */
- s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_X07, S5P_GPIO_FUNC(0x3));
}
vidinfo_t panel_info = {
diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c
index 860c851..e009564 100644
--- a/board/samsung/smdkc100/smdkc100.c
+++ b/board/samsung/smdkc100/smdkc100.c
@@ -21,11 +21,8 @@ static void smc9115_pre_init(void)
{
u32 smc_bw_conf, smc_bc_conf;
- struct s5pc100_gpio *const gpio =
- (struct s5pc100_gpio *)samsung_get_base_gpio();
-
/* gpio configuration GPK0CON */
- s5p_gpio_cfg_pin(&gpio->k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+ gpio_cfg_pin(S5PC100_GPIO_K00 + CONFIG_ENV_SROM_BANK, S5P_GPIO_FUNC(2));
/* Ethernet needs bus width of 16 bits */
smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c
index 81a3060..8eca358 100644
--- a/board/samsung/smdkv310/smdkv310.c
+++ b/board/samsung/smdkv310/smdkv310.c
@@ -15,15 +15,13 @@
#include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR;
-struct exynos4_gpio_part1 *gpio1;
-struct exynos4_gpio_part2 *gpio2;
static void smc9115_pre_init(void)
{
u32 smc_bw_conf, smc_bc_conf;
/* gpio configuration GPK0CON */
- s5p_gpio_cfg_pin(&gpio2->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS4_GPIO_Y00 + CONFIG_ENV_SROM_BANK, S5P_GPIO_FUNC(2));
/* Ethernet needs bus width of 16 bits */
smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
@@ -38,9 +36,6 @@ static void smc9115_pre_init(void)
int board_init(void)
{
- gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
- gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
-
smc9115_pre_init();
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
@@ -103,21 +98,21 @@ int board_mmc_init(bd_t *bis)
* GPK2[2] SD_2_CDn
* GPK2[3:6] SD_2_DATA[0:3](2)
*/
- for (i = 0; i < 7; i++) {
+ for (i = EXYNOS4_GPIO_K20; i < EXYNOS4_GPIO_K27; i++) {
/* GPK2[0:6] special function 2 */
- s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
/* GPK2[0:6] drv 4x */
- s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
/* GPK2[0:1] pull disable */
- if (i == 0 || i == 1) {
- s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+ if (i == EXYNOS4_GPIO_K20 || i == EXYNOS4_GPIO_K21) {
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
continue;
}
/* GPK2[2:6] pull up */
- s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
+ gpio_set_pull(i, S5P_GPIO_PULL_UP);
}
err = s5p_mmc_init(2, 4);
return err;
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 7c79e7b..f8b2908 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -54,8 +54,6 @@ int exynos_init(void)
void i2c_init_board(void)
{
int err;
- struct exynos4_gpio_part2 *gpio2 =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
/* I2C_5 -> PMIC */
err = exynos_pinmux_config(PERIPH_ID_I2C5, PINMUX_FLAG_NONE);
@@ -65,8 +63,8 @@ void i2c_init_board(void)
}
/* I2C_8 -> FG */
- s5p_gpio_direction_output(&gpio2->y4, 0, 1);
- s5p_gpio_direction_output(&gpio2->y4, 1, 1);
+ gpio_direction_output(EXYNOS4_GPIO_Y40, 1);
+ gpio_direction_output(EXYNOS4_GPIO_Y41, 1);
}
static void trats_low_power_mode(void)
@@ -347,21 +345,19 @@ int exynos_power_init(void)
static unsigned int get_hw_revision(void)
{
- struct exynos4_gpio_part1 *gpio =
- (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
int hwrev = 0;
int i;
/* hw_rev[3:0] == GPE1[3:0] */
- for (i = 0; i < 4; i++) {
- s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
- s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
+ for (i = EXYNOS4_GPIO_E10; i < EXYNOS4_GPIO_E14; i++) {
+ gpio_cfg_pin(i, S5P_GPIO_INPUT);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
}
udelay(1);
for (i = 0; i < 4; i++)
- hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i);
+ hwrev |= (gpio_get_value(EXYNOS4_GPIO_E10 + i) << i);
debug("hwrev 0x%x\n", hwrev);
@@ -444,11 +440,8 @@ int usb_cable_connected(void)
static void pmic_reset(void)
{
- struct exynos4_gpio_part2 *gpio =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-
- s5p_gpio_direction_output(&gpio->x0, 7, 1);
- s5p_gpio_set_pull(&gpio->x2, 7, GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS4_GPIO_X07, 1);
+ gpio_set_pull(EXYNOS4_GPIO_X27, S5P_GPIO_PULL_NONE);
}
static void board_clock_init(void)
@@ -525,12 +518,9 @@ static void board_power_init(void)
static void exynos_uart_init(void)
{
- struct exynos4_gpio_part2 *gpio2 =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-
/* UART_SEL GPY4[7] (part2) at EXYNOS4 */
- s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP);
- s5p_gpio_direction_output(&gpio2->y4, 7, 1);
+ gpio_set_pull(EXYNOS4_GPIO_Y47, S5P_GPIO_PULL_UP);
+ gpio_direction_output(EXYNOS4_GPIO_Y47, 1);
}
int exynos_early_init_f(void)
@@ -546,14 +536,11 @@ int exynos_early_init_f(void)
void exynos_reset_lcd(void)
{
- struct exynos4_gpio_part2 *gpio2 =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-
- s5p_gpio_direction_output(&gpio2->y4, 5, 1);
+ gpio_direction_output(EXYNOS4_GPIO_Y45, 1);
udelay(10000);
- s5p_gpio_direction_output(&gpio2->y4, 5, 0);
+ gpio_direction_output(EXYNOS4_GPIO_Y45, 0);
udelay(10000);
- s5p_gpio_direction_output(&gpio2->y4, 5, 1);
+ gpio_direction_output(EXYNOS4_GPIO_Y45, 1);
}
int lcd_power(void)
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index f558ef9..d4d5926 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -25,9 +25,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static struct exynos4x12_gpio_part1 *gpio1;
-static struct exynos4x12_gpio_part2 *gpio2;
-
static unsigned int board_rev = -1;
static inline u32 get_model_rev(void);
@@ -37,26 +34,24 @@ static void check_hw_revision(void)
int modelrev = 0;
int i;
- gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
-
/*
* GPM1[1:0]: MODEL_REV[1:0]
* Don't set as pull-none for these N/C pin.
* TRM say that it may cause unexcepted state and leakage current.
* and pull-none is only for output function.
*/
- for (i = 0; i < 2; i++)
- s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT);
+ for (i = EXYNOS4X12_GPIO_M10; i < EXYNOS4X12_GPIO_M12; i++)
+ gpio_cfg_pin(i, S5P_GPIO_INPUT);
/* GPM1[5:2]: HW_REV[3:0] */
- for (i = 2; i < 6; i++) {
- s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT);
- s5p_gpio_set_pull(&gpio2->m1, i, GPIO_PULL_NONE);
+ for (i = EXYNOS4X12_GPIO_M12; i < EXYNOS4X12_GPIO_M16; i++) {
+ gpio_cfg_pin(i, S5P_GPIO_INPUT);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
}
/* GPM1[1:0]: MODEL_REV[1:0] */
for (i = 0; i < 2; i++)
- modelrev |= (s5p_gpio_get_value(&gpio2->m1, i) << i);
+ modelrev |= (gpio_get_value(EXYNOS4X12_GPIO_M10 + i) << i);
/* board_rev[15:8] = model */
board_rev = modelrev << 8;
@@ -74,26 +69,24 @@ static inline u32 get_model_rev(void)
static void board_external_gpio_init(void)
{
- gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
-
/*
* some pins which in alive block are connected with external pull-up
* but it's default setting is pull-down.
* if that pin set as input then that floated
*/
- s5p_gpio_set_pull(&gpio2->x0, 2, GPIO_PULL_NONE); /* PS_ALS_INT */
- s5p_gpio_set_pull(&gpio2->x0, 4, GPIO_PULL_NONE); /* TSP_nINT */
- s5p_gpio_set_pull(&gpio2->x0, 7, GPIO_PULL_NONE); /* AP_PMIC_IRQ*/
- s5p_gpio_set_pull(&gpio2->x1, 5, GPIO_PULL_NONE); /* IF_PMIC_IRQ*/
- s5p_gpio_set_pull(&gpio2->x2, 0, GPIO_PULL_NONE); /* VOL_UP */
- s5p_gpio_set_pull(&gpio2->x2, 1, GPIO_PULL_NONE); /* VOL_DOWN */
- s5p_gpio_set_pull(&gpio2->x2, 3, GPIO_PULL_NONE); /* FUEL_ALERT */
- s5p_gpio_set_pull(&gpio2->x2, 4, GPIO_PULL_NONE); /* ADC_INT */
- s5p_gpio_set_pull(&gpio2->x2, 7, GPIO_PULL_NONE); /* nPOWER */
- s5p_gpio_set_pull(&gpio2->x3, 0, GPIO_PULL_NONE); /* WPC_INT */
- s5p_gpio_set_pull(&gpio2->x3, 5, GPIO_PULL_NONE); /* OK_KEY */
- s5p_gpio_set_pull(&gpio2->x3, 7, GPIO_PULL_NONE); /* HDMI_HPD */
+ gpio_set_pull(EXYNOS4X12_GPIO_X02, S5P_GPIO_PULL_NONE); /* PS_ALS_INT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X04, S5P_GPIO_PULL_NONE); /* TSP_nINT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X07, S5P_GPIO_PULL_NONE); /* AP_PMIC_IRQ*/
+ gpio_set_pull(EXYNOS4X12_GPIO_X15, S5P_GPIO_PULL_NONE); /* IF_PMIC_IRQ*/
+ gpio_set_pull(EXYNOS4X12_GPIO_X20, S5P_GPIO_PULL_NONE); /* VOL_UP */
+ gpio_set_pull(EXYNOS4X12_GPIO_X21, S5P_GPIO_PULL_NONE); /* VOL_DOWN */
+ gpio_set_pull(EXYNOS4X12_GPIO_X23, S5P_GPIO_PULL_NONE); /* FUEL_ALERT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X24, S5P_GPIO_PULL_NONE); /* ADC_INT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X27, S5P_GPIO_PULL_NONE); /* nPOWER */
+ gpio_set_pull(EXYNOS4X12_GPIO_X30, S5P_GPIO_PULL_NONE); /* WPC_INT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X35, S5P_GPIO_PULL_NONE); /* OK_KEY */
+ gpio_set_pull(EXYNOS4X12_GPIO_X37, S5P_GPIO_PULL_NONE); /* HDMI_HPD */
}
#ifdef CONFIG_SYS_I2C_INIT_BOARD
@@ -101,9 +94,6 @@ static void board_init_i2c(void)
{
int err;
- gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
- gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
-
/* I2C_7 */
err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE);
if (err) {
@@ -112,12 +102,12 @@ static void board_init_i2c(void)
}
/* I2C_8 */
- s5p_gpio_direction_output(&gpio1->f1, 4, 1);
- s5p_gpio_direction_output(&gpio1->f1, 5, 1);
+ gpio_direction_output(EXYNOS4X12_GPIO_F14, 1);
+ gpio_direction_output(EXYNOS4X12_GPIO_F15, 1);
/* I2C_9 */
- s5p_gpio_direction_output(&gpio2->m2, 1, 1);
- s5p_gpio_direction_output(&gpio2->m2, 0, 1);
+ gpio_direction_output(EXYNOS4X12_GPIO_M21, 1);
+ gpio_direction_output(EXYNOS4X12_GPIO_M20, 1);
}
#endif
@@ -125,17 +115,17 @@ static void board_init_i2c(void)
int get_soft_i2c_scl_pin(void)
{
if (I2C_ADAP_HWNR)
- return exynos4x12_gpio_get(2, m2, 1); /* I2C9 */
+ return EXYNOS4X12_GPIO_M21; /* I2C9 */
else
- return exynos4x12_gpio_get(1, f1, 4); /* I2C8 */
+ return EXYNOS4X12_GPIO_F14; /* I2C8 */
}
int get_soft_i2c_sda_pin(void)
{
if (I2C_ADAP_HWNR)
- return exynos4x12_gpio_get(2, m2, 0); /* I2C9 */
+ return EXYNOS4X12_GPIO_M20; /* I2C9 */
else
- return exynos4x12_gpio_get(1, f1, 5); /* I2C8 */
+ return EXYNOS4X12_GPIO_F15; /* I2C8 */
}
#endif
@@ -398,11 +388,9 @@ void exynos_lcd_power_on(void)
{
struct pmic *p = pmic_get("MAX77686_PMIC");
- gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
-
/* LCD_2.2V_EN: GPC0[1] */
- s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP);
- s5p_gpio_direction_output(&gpio1->c0, 1, 1);
+ gpio_set_pull(EXYNOS4X12_GPIO_C01, S5P_GPIO_PULL_UP);
+ gpio_direction_output(EXYNOS4X12_GPIO_C01, 1);
/* LDO25 VCC_3.1V_LCD */
pmic_probe(p);
@@ -412,12 +400,10 @@ void exynos_lcd_power_on(void)
void exynos_reset_lcd(void)
{
- gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
-
/* reset lcd */
- s5p_gpio_direction_output(&gpio1->f2, 1, 0);
+ gpio_direction_output(EXYNOS4X12_GPIO_F21, 0);
udelay(10);
- s5p_gpio_set_value(&gpio1->f2, 1, 1);
+ gpio_set_value(EXYNOS4X12_GPIO_F21, 1);
}
void exynos_lcd_misc_init(vidinfo_t *vid)
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index f9d71b6..25f2a93 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -27,8 +27,6 @@
DECLARE_GLOBAL_DATA_PTR;
-struct exynos4_gpio_part1 *gpio1;
-struct exynos4_gpio_part2 *gpio2;
unsigned int board_rev;
u32 get_board_rev(void)
@@ -312,35 +310,35 @@ void exynos_cfg_lcd_gpio(void)
for (i = 0; i < 8; i++) {
/* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */
- s5p_gpio_cfg_pin(&gpio1->f0, i, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->f1, i, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->f2, i, GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS4_GPIO_F00 + i, S5P_GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS4_GPIO_F10 + i, S5P_GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS4_GPIO_F20 + i, S5P_GPIO_FUNC(2));
/* pull-up/down disable */
- s5p_gpio_set_pull(&gpio1->f0, i, GPIO_PULL_NONE);
- s5p_gpio_set_pull(&gpio1->f1, i, GPIO_PULL_NONE);
- s5p_gpio_set_pull(&gpio1->f2, i, GPIO_PULL_NONE);
+ gpio_set_pull(EXYNOS4_GPIO_F00 + i, S5P_GPIO_PULL_NONE);
+ gpio_set_pull(EXYNOS4_GPIO_F10 + i, S5P_GPIO_PULL_NONE);
+ gpio_set_pull(EXYNOS4_GPIO_F20 + i, S5P_GPIO_PULL_NONE);
/* drive strength to max (24bit) */
- s5p_gpio_set_drv(&gpio1->f0, i, GPIO_DRV_4X);
- s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
- s5p_gpio_set_drv(&gpio1->f1, i, GPIO_DRV_4X);
- s5p_gpio_set_rate(&gpio1->f1, i, GPIO_DRV_SLOW);
- s5p_gpio_set_drv(&gpio1->f2, i, GPIO_DRV_4X);
- s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
+ gpio_set_drv(EXYNOS4_GPIO_F00 + i, S5P_GPIO_DRV_4X);
+ gpio_set_rate(EXYNOS4_GPIO_F00 + i, S5P_GPIO_DRV_SLOW);
+ gpio_set_drv(EXYNOS4_GPIO_F10 + i, S5P_GPIO_DRV_4X);
+ gpio_set_rate(EXYNOS4_GPIO_F10 + i, S5P_GPIO_DRV_SLOW);
+ gpio_set_drv(EXYNOS4_GPIO_F20 + i, S5P_GPIO_DRV_4X);
+ gpio_set_rate(EXYNOS4_GPIO_F00 + i, S5P_GPIO_DRV_SLOW);
}
- for (i = 0; i < f3_end; i++) {
+ for (i = EXYNOS4_GPIO_F30; i < (EXYNOS4_GPIO_F30 + f3_end); i++) {
/* set GPF3[0:3] for RGB Interface and Data lines (32bit) */
- s5p_gpio_cfg_pin(&gpio1->f3, i, GPIO_FUNC(2));
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(2));
/* pull-up/down disable */
- s5p_gpio_set_pull(&gpio1->f3, i, GPIO_PULL_NONE);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
/* drive strength to max (24bit) */
- s5p_gpio_set_drv(&gpio1->f3, i, GPIO_DRV_4X);
- s5p_gpio_set_rate(&gpio1->f3, i, GPIO_DRV_SLOW);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
+ gpio_set_rate(i, S5P_GPIO_DRV_SLOW);
}
/* gpio pad configuration for LCD reset. */
- s5p_gpio_cfg_pin(&gpio2->y4, 5, GPIO_OUTPUT);
+ gpio_cfg_pin(EXYNOS4_GPIO_Y45, S5P_GPIO_OUTPUT);
spi_init();
}
@@ -352,11 +350,11 @@ int mipi_power(void)
void exynos_reset_lcd(void)
{
- s5p_gpio_set_value(&gpio2->y4, 5, 1);
+ gpio_set_value(EXYNOS4_GPIO_Y45, 1);
udelay(10000);
- s5p_gpio_set_value(&gpio2->y4, 5, 0);
+ gpio_set_value(EXYNOS4_GPIO_Y45, 0);
udelay(10000);
- s5p_gpio_set_value(&gpio2->y4, 5, 1);
+ gpio_set_value(EXYNOS4_GPIO_Y45, 1);
udelay(100);
}
@@ -386,9 +384,6 @@ void exynos_enable_ldo(unsigned int onoff)
int exynos_init(void)
{
- gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
- gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
-
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
switch (get_hwrev()) {
@@ -399,7 +394,7 @@ int exynos_init(void)
* you should set it HIGH since it removes the inverter
*/
/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
- s5p_gpio_direction_output(&gpio1->e3, 6, 0);
+ gpio_direction_output(EXYNOS4_GPIO_E36, 0);
break;
default:
/*
@@ -407,7 +402,7 @@ int exynos_init(void)
* But set it as HIGH to ensure
*/
/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
- s5p_gpio_direction_output(&gpio1->e1, 3, 1);
+ gpio_direction_output(EXYNOS4_GPIO_E13, 1);
break;
}