ARM: Add support for S3C6400 based SMDK6400 board

SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
driver for it too. The board can also boot from the NOR flash, but due to
hardware limitations it can only address 64KiB on it, which is not enough
for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

1 files changed, 130 insertions, 0 deletions

diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c
new file mode 100644
index 0000000..77fd2c8
--- /dev/null
+++ b/board/samsung/smdk6400/smdk6400.c
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <s3c6400.h>
+
+/* ------------------------------------------------------------------------- */
+#define CS8900_Tacs	0x0	/* 0clk		address set-up		*/
+#define CS8900_Tcos	0x4	/* 4clk		chip selection set-up	*/
+#define CS8900_Tacc	0xE	/* 14clk	access cycle		*/
+#define CS8900_Tcoh	0x1	/* 1clk		chip selection hold	*/
+#define CS8900_Tah	0x4	/* 4clk		address holding time	*/
+#define CS8900_Tacp	0x6	/* 6clk		page mode access cycle	*/
+#define CS8900_PMC	0x0	/* normal(1data)page mode configuration	*/
+
+static inline void delay(unsigned long loops)
+{
+	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+			  "bne 1b"
+			  : "=r" (loops) : "0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+static void cs8900_pre_init(void)
+{
+	SROM_BW_REG &= ~(0xf << 4);
+	SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4);
+	SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) +
+			(CS8900_Tacc << 16) + (CS8900_Tcoh << 12) +
+			(CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC);
+}
+
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	cs8900_pre_init();
+
+	/* NOR-flash in SROM0 */
+
+	/* Enable WAIT */
+	SROM_BW_REG |= 4 | 8 | 1;
+
+	gd->bd->bi_arch_number = MACH_TYPE;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	printf("Board:   SMDK6400\n");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ENABLE_MMU
+ulong virt_to_phy_smdk6400(ulong addr)
+{
+	if ((0xc0000000 <= addr) && (addr < 0xc8000000))
+		return addr - 0xc0000000 + 0x50000000;
+	else
+		printf("do not support this address : %08lx\n", addr);
+
+	return addr;
+}
+#endif
+
+#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+void nand_init(void)
+{
+	nand_probe(CFG_NAND_BASE);
+	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN)
+		print_size(nand_dev_desc[0].totlen, "\n");
+}
+#endif
+
+ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info)
+{
+	if (banknum == 0) {	/* non-CFI boot flash */
+		info->portwidth = FLASH_CFI_16BIT;
+		info->chipwidth = FLASH_CFI_BY16;
+		info->interface = FLASH_CFI_X16;
+		return 1;
+	} else
+		return 0;
+}