EXYNOS: Add SMDK5250 board support

SMDK5250 board is based on Samsungs EXYNOS5250 SoC.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

1 files changed, 451 insertions, 0 deletions

diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h
new file mode 100644
index 0000000..1276fd3
--- /dev/null
+++ b/board/samsung/smdk5250/setup.h
@@ -0,0 +1,451 @@
+/*
+ * Machine Specific Values for SMDK5250 board based on S5PC520
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SMDK5250_SETUP_H
+#define _SMDK5250_SETUP_H
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+/* GPIO Offsets for UART: GPIO Contol Register */
+#define EXYNOS5_GPIO_A0_CON_OFFSET	0x0
+#define EXYNOS5_GPIO_A1_CON_OFFSET	0x20
+
+/* TZPC : Register Offsets */
+#define TZPC0_BASE		0x10100000
+#define TZPC1_BASE		0x10110000
+#define TZPC2_BASE		0x10120000
+#define TZPC3_BASE		0x10130000
+#define TZPC4_BASE		0x10140000
+#define TZPC5_BASE		0x10150000
+#define TZPC6_BASE		0x10160000
+#define TZPC7_BASE		0x10170000
+#define TZPC8_BASE		0x10180000
+#define TZPC9_BASE		0x10190000
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL, 1 = SCLKMPLL */
+#define MUX_HPM_SEL		0
+#define MUX_CPU_SEL		0
+#define MUX_APLL_SEL		1
+#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20) \
+				| (MUX_CPU_SEL << 16) \
+				| (MUX_APLL_SEL))
+
+/* CLK_DIV_CPU0 */
+#define ARM2_RATIO		0x0
+#define APLL_RATIO		0x1
+#define PCLK_DBG_RATIO		0x1
+#define ATB_RATIO		0x4
+#define PERIPH_RATIO		0x7
+#define ACP_RATIO		0x7
+#define CPUD_RATIO		0x2
+#define ARM_RATIO		0x0
+#define CLK_DIV_CPU0_VAL	((ARM2_RATIO << 28) \
+				| (APLL_RATIO << 24) \
+				| (PCLK_DBG_RATIO << 20) \
+				| (ATB_RATIO << 16) \
+				| (PERIPH_RATIO << 12) \
+				| (ACP_RATIO << 8) \
+				| (CPUD_RATIO << 4) \
+				| (ARM_RATIO))
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO		0x4
+#define COPY_RATIO		0x0
+#define CLK_DIV_CPU1_VAL	((HPM_RATIO << 4) \
+				| (COPY_RATIO))
+
+#define APLL_MDIV		0x7D
+#define APLL_PDIV		0x3
+#define APLL_SDIV		0x0
+
+#define MPLL_MDIV		0x64
+#define MPLL_PDIV		0x3
+#define MPLL_SDIV		0x0
+
+#define CPLL_MDIV		0x96
+#define CPLL_PDIV		0x4
+#define CPLL_SDIV		0x0
+
+/* APLL_CON1 */
+#define APLL_CON1_VAL	(0x00203800)
+
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL	(0x00203800)
+
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL	(0x00203800)
+
+#define EPLL_MDIV	0x60
+#define EPLL_PDIV	0x3
+#define EPLL_SDIV	0x3
+
+#define EPLL_CON1_VAL	0x00000000
+#define EPLL_CON2_VAL	0x00000080
+
+#define VPLL_MDIV	0x96
+#define VPLL_PDIV	0x3
+#define VPLL_SDIV	0x2
+
+#define VPLL_CON1_VAL	0x00000000
+#define VPLL_CON2_VAL	0x00000080
+
+#define BPLL_MDIV	0x215
+#define BPLL_PDIV	0xC
+#define BPLL_SDIV	0x1
+
+#define BPLL_CON1_VAL	0x00203800
+
+/* Set PLL */
+#define set_pll(mdiv, pdiv, sdiv)	(1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
+
+#define APLL_CON0_VAL	set_pll(APLL_MDIV, APLL_PDIV, APLL_SDIV)
+#define MPLL_CON0_VAL	set_pll(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
+#define CPLL_CON0_VAL	set_pll(CPLL_MDIV, CPLL_PDIV, CPLL_SDIV)
+#define EPLL_CON0_VAL	set_pll(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
+#define VPLL_CON0_VAL	set_pll(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
+#define BPLL_CON0_VAL	set_pll(BPLL_MDIV, BPLL_PDIV, BPLL_SDIV)
+
+/* CLK_SRC_CORE0 */
+#define CLK_SRC_CORE0_VAL	0x00060000
+
+/* CLK_SRC_CORE1 */
+#define CLK_SRC_CORE1_VAL	0x100
+
+/* CLK_DIV_CORE0 */
+#define CLK_DIV_CORE0_VAL	0x120000
+
+/* CLK_DIV_CORE1 */
+#define CLK_DIV_CORE1_VAL	0x07070700
+
+/* CLK_SRC_CDREX */
+#define CLK_SRC_CDREX_INIT_VAL	0x1
+#define CLK_SRC_CDREX_VAL	0x111
+
+/* CLK_DIV_CDREX */
+#define CLK_DIV_CDREX_INIT_VAL	0x71771111
+
+#define MCLK_CDREX2_RATIO	0x0
+#define ACLK_EFCON_RATIO	0x1
+#define MCLK_DPHY_RATIO		0x0
+#define MCLK_CDREX_RATIO	0x0
+#define ACLK_C2C_200_RATIO	0x1
+#define C2C_CLK_400_RATIO	0x1
+#define PCLK_CDREX_RATIO	0x3
+#define ACLK_CDREX_RATIO	0x1
+#define CLK_DIV_CDREX_VAL	((MCLK_DPHY_RATIO << 20) \
+				| (MCLK_CDREX_RATIO << 16) \
+				| (ACLK_C2C_200_RATIO << 12) \
+				| (C2C_CLK_400_RATIO << 8) \
+				| (PCLK_CDREX_RATIO << 4) \
+				| (ACLK_CDREX_RATIO))
+
+#define MCLK_EFPHY_RATIO	0x4
+#define CLK_DIV_CDREX2_VAL	MCLK_EFPHY_RATIO
+
+/* CLK_DIV_ACP */
+#define CLK_DIV_ACP_VAL	0x12
+
+/* CLK_SRC_TOP0 */
+#define MUX_ACLK_300_GSCL_SEL		0x1
+#define MUX_ACLK_300_GSCL_MID_SEL	0x0
+#define MUX_ACLK_400_SEL		0x0
+#define MUX_ACLK_333_SEL		0x0
+#define MUX_ACLK_300_DISP1_SEL		0x1
+#define MUX_ACLK_300_DISP1_MID_SEL	0x0
+#define MUX_ACLK_200_SEL		0x0
+#define MUX_ACLK_166_SEL		0x0
+#define CLK_SRC_TOP0_VAL	((MUX_ACLK_300_GSCL_SEL << 25) \
+				| (MUX_ACLK_300_GSCL_MID_SEL << 24) \
+				| (MUX_ACLK_400_SEL << 20) \
+				| (MUX_ACLK_333_SEL << 16) \
+				| (MUX_ACLK_300_DISP1_SEL << 15) \
+				| (MUX_ACLK_300_DISP1_MID_SEL << 14)	\
+				| (MUX_ACLK_200_SEL << 12) \
+				| (MUX_ACLK_166_SEL << 8))
+
+/* CLK_SRC_TOP1 */
+#define MUX_ACLK_400_ISP_SEL		0x0
+#define MUX_ACLK_400_IOP_SEL		0x0
+#define MUX_ACLK_MIPI_HSI_TXBASE_SEL	0x0
+#define CLK_SRC_TOP1_VAL		((MUX_ACLK_400_ISP_SEL << 24) \
+					|(MUX_ACLK_400_IOP_SEL << 20) \
+					|(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16))
+
+/* CLK_SRC_TOP2 */
+#define MUX_BPLL_USER_SEL	0x1
+#define MUX_MPLL_USER_SEL	0x1
+#define MUX_VPLL_SEL		0x0
+#define MUX_EPLL_SEL		0x0
+#define MUX_CPLL_SEL		0x0
+#define VPLLSRC_SEL		0x0
+#define CLK_SRC_TOP2_VAL	((MUX_BPLL_USER_SEL << 24) \
+				| (MUX_MPLL_USER_SEL << 20) \
+				| (MUX_VPLL_SEL << 16) \
+				| (MUX_EPLL_SEL << 12) \
+				| (MUX_CPLL_SEL << 8) \
+				| (VPLLSRC_SEL))
+/* CLK_SRC_TOP3 */
+#define MUX_ACLK_333_SUB_SEL		0x1
+#define MUX_ACLK_400_SUB_SEL		0x1
+#define MUX_ACLK_266_ISP_SUB_SEL	0x1
+#define MUX_ACLK_266_GPS_SUB_SEL	0x1
+#define MUX_ACLK_300_GSCL_SUB_SEL	0x1
+#define MUX_ACLK_266_GSCL_SUB_SEL	0x1
+#define MUX_ACLK_300_DISP1_SUB_SEL	0x1
+#define MUX_ACLK_200_DISP1_SUB_SEL	0x1
+#define CLK_SRC_TOP3_VAL		((MUX_ACLK_333_SUB_SEL << 24) \
+					| (MUX_ACLK_400_SUB_SEL << 20) \
+					| (MUX_ACLK_266_ISP_SUB_SEL << 16) \
+					| (MUX_ACLK_266_GPS_SUB_SEL << 12) \
+					| (MUX_ACLK_300_GSCL_SUB_SEL << 10) \
+					| (MUX_ACLK_266_GSCL_SUB_SEL << 8) \
+					| (MUX_ACLK_300_DISP1_SUB_SEL << 6) \
+					| (MUX_ACLK_200_DISP1_SUB_SEL << 4))
+
+/* CLK_DIV_TOP0 */
+#define ACLK_300_RATIO		0x0
+#define ACLK_400_RATIO		0x3
+#define ACLK_333_RATIO		0x2
+#define ACLK_266_RATIO		0x2
+#define ACLK_200_RATIO		0x3
+#define ACLK_166_RATIO		0x5
+#define ACLK_133_RATIO		0x1
+#define ACLK_66_RATIO		0x5
+#define CLK_DIV_TOP0_VAL	((ACLK_300_RATIO << 28) \
+				| (ACLK_400_RATIO << 24) \
+				| (ACLK_333_RATIO << 20) \
+				| (ACLK_266_RATIO << 16) \
+				| (ACLK_200_RATIO << 12) \
+				| (ACLK_166_RATIO << 8) \
+				| (ACLK_133_RATIO << 4) \
+				| (ACLK_66_RATIO))
+
+/* CLK_DIV_TOP1 */
+#define ACLK_MIPI_HSI_TX_BASE_RATIO	0x3
+#define ACLK_66_PRE_RATIO	0x1
+#define ACLK_400_ISP_RATIO	0x1
+#define ACLK_400_IOP_RATIO	0x1
+#define ACLK_300_GSCL_RATIO	0x0
+#define ACLK_266_GPS_RATIO	0x7
+
+#define CLK_DIV_TOP1_VAL	((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \
+				| (ACLK_66_PRE_RATIO << 24) \
+				| (ACLK_400_ISP_RATIO << 20) \
+				| (ACLK_400_IOP_RATIO << 16) \
+				| (ACLK_300_GSCL_RATIO << 12) \
+				| (ACLK_266_GPS_RATIO << 8))
+
+/* APLL_LOCK */
+#define APLL_LOCK_VAL		(0x3E8)
+/* MPLL_LOCK */
+#define MPLL_LOCK_VAL		(0x2F1)
+/* CPLL_LOCK */
+#define CPLL_LOCK_VAL		(0x3E8)
+/* EPLL_LOCK */
+#define EPLL_LOCK_VAL		(0x2321)
+/* VPLL_LOCK */
+#define VPLL_LOCK_VAL		(0x2321)
+/* BPLL_LOCK */
+#define BPLL_LOCK_VAL		(0x3E8)
+
+/* CLK_SRC_PERIC0 */
+/* SRC_CLOCK = SCLK_MPLL */
+#define PWM_SEL			0
+#define UART4_SEL		6
+#define UART3_SEL		6
+#define UART2_SEL		6
+#define UART1_SEL		6
+#define UART0_SEL		6
+#define CLK_SRC_PERIC0_VAL	((PWM_SEL << 24) \
+				| (UART4_SEL << 16) \
+				| (UART3_SEL << 12) \
+				| (UART2_SEL << 8) \
+				| (UART1_SEL << 4) \
+				| (UART0_SEL << 0))
+
+#define CLK_SRC_FSYS_VAL	0x66666
+#define CLK_DIV_FSYS0_VAL	0x0BB00000
+#define CLK_DIV_FSYS1_VAL	0x000f000f
+#define CLK_DIV_FSYS2_VAL	0x020f020f
+#define CLK_DIV_FSYS3_VAL	0x000f
+
+/* CLK_DIV_PERIC0 */
+#define UART5_RATIO		8
+#define UART4_RATIO		8
+#define UART3_RATIO		8
+#define UART2_RATIO		8
+#define UART1_RATIO		8
+#define UART0_RATIO		8
+#define CLK_DIV_PERIC0_VAL	((UART4_RATIO << 16) \
+				| (UART3_RATIO << 12) \
+				| (UART2_RATIO << 8) \
+				| (UART1_RATIO << 4) \
+				| (UART0_RATIO << 0))
+
+/* CLK_DIV_PERIC3 */
+#define PWM_RATIO		8
+#define CLK_DIV_PERIC3_VAL	(PWM_RATIO << 0)
+
+/* CLK_SRC_LEX */
+#define CLK_SRC_LEX_VAL		0x0
+
+/* CLK_DIV_LEX */
+#define CLK_DIV_LEX_VAL		0x10
+
+/* CLK_DIV_R0X */
+#define CLK_DIV_R0X_VAL		0x10
+
+/* CLK_DIV_L0X */
+#define CLK_DIV_R1X_VAL		0x10
+
+/* SCLK_SRC_ISP */
+#define SCLK_SRC_ISP_VAL	0x600
+/* CLK_DIV_ISP0 */
+#define CLK_DIV_ISP0_VAL	0x31
+
+/* CLK_DIV_ISP1 */
+#define CLK_DIV_ISP1_VAL	0x0
+
+/* CLK_DIV_ISP2 */
+#define CLK_DIV_ISP2_VAL	0x1
+
+#define MPLL_DEC	(MPLL_MDIV * MPLL_MDIV / (MPLL_PDIV * 2^(MPLL_SDIV-1)))
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE			0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET		0xFF
+
+/* DMC Init */
+#define SET			1
+#define RESET			0
+/* (Memory Interleaving Size = 1 << IV_SIZE) */
+#define CONFIG_IV_SIZE		0x07
+
+#define PHY_RESET_VAL	(0 << 0)
+
+/*ZQ Configurations */
+#define PHY_CON16_RESET_VAL	0x08000304
+
+#define ZQ_MODE_DDS_VAL		(0x5 << 24)
+#define ZQ_MODE_TERM_VAL	(0x5 << 21)
+#define SET_ZQ_MODE_DDS_VAL(x)	(x = (x & ~(0x7 << 24)) | ZQ_MODE_DDS_VAL)
+#define SET_ZQ_MODE_TERM_VAL(x)	(x = (x & ~(0x7 << 21)) | ZQ_MODE_TERM_VAL)
+
+#define ZQ_MODE_NOTERM		(1 << 19)
+#define ZQ_CLK_DIV_EN		(1 << 18)
+#define ZQ_MANUAL_STR		(1 << 1)
+
+/* Channel and Chip Selection */
+#define CONFIG_DMC_CHANNELS		2
+#define CONFIG_CHIPS_PER_CHANNEL	2
+
+#define SET_CMD_CHANNEL(x, y)	(x = (x & ~(1 << 28)) | y << 28)
+#define SET_CMD_CHIP(x, y)	(x = (x & ~(1 << 20)) | y << 20)
+
+/* Diret Command */
+#define	DIRECT_CMD_NOP		0x07000000
+#define DIRECT_CMD_MRS1		0x00071C00
+#define DIRECT_CMD_MRS2		0x00010BFC
+#define DIRECT_CMD_MRS3		0x00000708
+#define DIRECT_CMD_MRS4		0x00000818
+#define	DIRECT_CMD_PALL		0x01000000
+
+/* DLL Resync */
+#define FP_RSYNC		(1 << 3)
+
+#define CONFIG_CTRL_DLL_ON(x, y)	(x = (x & ~(1 << 5)) | y << 5)
+#define CONFIG_CTRL_START(x, y)		(x = (x & ~(1 << 6)) | y << 6)
+#define SET_CTRL_FORCE_VAL(x, y)	(x = (x & ~(0x7F << 8)) | y << 8)
+
+/* RDLVL */
+#define PHY_CON0_RESET_VAL	0x17023240
+#define DDR_MODE_LPDDR2		0x2
+#define BYTE_RDLVL_EN		(1 << 13)
+#define CTRL_ATGATE		(1 << 6)
+#define SET_CTRL_DDR_MODE(x, y)	(x = (x & ~(0x3 << 11)) | y << 11)
+
+#define PHY_CON1_RESET_VAL	0x9210100
+#define RDLVL_RDDATAPADJ	0x1
+#define SET_RDLVL_RDDATAPADJ	((PHY_CON1_RESET_VAL & ~(0xFFFF << 0))\
+					| RDLVL_RDDATAPADJ << 0)
+
+#define PHY_CON2_RESET_VAL	0x00010004
+#define RDLVL_EN		(1 << 25)
+#define RDDSKEW_CLEAR		(1 << 13)
+
+#define CTRL_RDLVL_DATA_EN	(1 << 1)
+#define LPDDR2_ADDR		0x00000208
+
+#define DMC_MEMCONFIG0_VAL	0x00001323
+#define DMC_MEMCONFIG1_VAL	0x00001323
+#define DMC_MEMBASECONFIG0_VAL	0x00400780
+#define DMC_MEMBASECONFIG1_VAL	0x00800780
+#define DMC_MEMCONTROL_VAL	0x00212500
+#define DMC_PRECHCONFIG_VAL		0xFF000000
+#define DMC_PWRDNCONFIG_VAL		0xFFFF00FF
+#define DMC_TIMINGREF_VAL		0x0000005D
+#define DMC_TIMINGROW_VAL		0x2336544C
+#define DMC_TIMINGDATA_VAL		0x24202408
+#define DMC_TIMINGPOWER_VAL		0x38260235
+
+#define CTRL_BSTLEN		0x04
+#define CTRL_RDLAT		0x08
+#define PHY_CON42_VAL		(CTRL_BSTLEN << 8 | CTRL_RDLAT << 0)
+
+/* DQS, DQ, DEBUG offsets */
+#define	SET_DQS_OFFSET_VAL	0x7F7F7F7F
+#define	SET_DQ_OFFSET_VAL	0x7F7F7F7F
+#define	SET_DEBUG_OFFSET_VAL	0x7F
+
+#define	RESET_DQS_OFFSET_VAL	0x08080808
+#define	RESET_DQ_OFFSET_VAL	0x08080808
+#define	RESET_DEBUG_OFFSET_VAL	0x8
+
+#define CTRL_PULLD_DQ		(0x0F << 8)
+#define CTRL_PULLD_DQS		(0x0F << 0)
+
+#define DFI_INIT_START		(1 << 28)
+
+#define CLK_STOP_EN	(1 << 0)
+#define DPWRDN_EN	(1 << 1)
+#define DSREF_EN	(1 << 5)
+
+#define AREF_EN			(1 << 5)
+void sdelay(unsigned long);
+void mem_ctrl_init(void);
+void system_clock_init(void);
+void tzpc_init(void);
+
+#endif