diff options
author | Tom Rini <trini@ti.com> | 2014-01-10 10:56:00 -0500 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-01-10 10:56:00 -0500 |
commit | 7f673c99c2d8d1aa21996c5b914f06d784b080ca (patch) | |
tree | df68108a0bd7326dc6299b96853b769220c55470 /board/renesas/lager/lager.c | |
parent | 8401bfa91ef57e331e2a3abdf768d41803bec88e (diff) | |
parent | 10a147bc665367111920be657409a5d56d3c0590 (diff) | |
download | u-boot-imx-7f673c99c2d8d1aa21996c5b914f06d784b080ca.zip u-boot-imx-7f673c99c2d8d1aa21996c5b914f06d784b080ca.tar.gz u-boot-imx-7f673c99c2d8d1aa21996c5b914f06d784b080ca.tar.bz2 |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be
added to include/configs/exynos5-dt.h now.
Conflicts:
include/configs/exynos5250-dt.h
Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'board/renesas/lager/lager.c')
-rw-r--r-- | board/renesas/lager/lager.c | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c index 5c99fc9..cdd5b32 100644 --- a/board/renesas/lager/lager.c +++ b/board/renesas/lager/lager.c @@ -18,6 +18,8 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/arch/rmobile.h> +#include <miiphy.h> +#include <i2c.h> #include "qos.h" DECLARE_GLOBAL_DATA_PTR; @@ -207,6 +209,10 @@ void s_init(void) #define SMSTPCR7 0xE615014C #define SCIF0_MSTP721 (1 << 21) +#define MSTPSR8 0xE61509A0 +#define SMSTPCR8 0xE6150990 +#define ETHER_MSTP813 (1 << 13) + #define PMMR 0xE6060000 #define GPSR4 0xE6060014 #define IPSR14 0xE6060058 @@ -242,6 +248,9 @@ int board_early_init_f(void) mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); + /* ETHER */ + mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); + return 0; } @@ -256,6 +265,68 @@ int board_init(void) /* Init PFC controller */ r8a7790_pinmux_init(); + /* ETHER Enable */ + gpio_request(GPIO_FN_ETH_CRS_DV, NULL); + gpio_request(GPIO_FN_ETH_RX_ER, NULL); + gpio_request(GPIO_FN_ETH_RXD0, NULL); + gpio_request(GPIO_FN_ETH_RXD1, NULL); + gpio_request(GPIO_FN_ETH_LINK, NULL); + gpio_request(GPIO_FN_ETH_REF_CLK, NULL); + gpio_request(GPIO_FN_ETH_MDIO, NULL); + gpio_request(GPIO_FN_ETH_TXD1, NULL); + gpio_request(GPIO_FN_ETH_TX_EN, NULL); + gpio_request(GPIO_FN_ETH_MAGIC, NULL); + gpio_request(GPIO_FN_ETH_TXD0, NULL); + gpio_request(GPIO_FN_ETH_MDC, NULL); + gpio_request(GPIO_FN_IRQ0, NULL); + + gpio_request(GPIO_GP_5_31, NULL); /* PHY_RST */ + gpio_direction_output(GPIO_GP_5_31, 0); + mdelay(20); + gpio_set_value(GPIO_GP_5_31, 1); + udelay(1); + + return 0; +} + +#define CXR24 0xEE7003C0 /* MAC address high register */ +#define CXR25 0xEE7003C8 /* MAC address low register */ +int board_eth_init(bd_t *bis) +{ + int ret = -ENODEV; + +#ifdef CONFIG_SH_ETHER + u32 val; + unsigned char enetaddr[6]; + + ret = sh_eth_initialize(bis); + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + return ret; + + /* Set Mac address */ + val = enetaddr[0] << 24 | enetaddr[1] << 16 | + enetaddr[2] << 8 | enetaddr[3]; + writel(val, CXR24); + + val = enetaddr[4] << 8 | enetaddr[5]; + writel(val, CXR25); + +#endif + + return ret; +} + +/* lager has KSZ8041NL/RNL */ +#define PHY_CONTROL1 0x1E +#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE_ACK 0x4000 +int board_phy_config(struct phy_device *phydev) +{ + int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1); + ret &= ~PHY_LED_MODE; + ret |= PHY_LED_MODE_ACK; + ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret); + return 0; } @@ -284,4 +355,11 @@ int board_late_init(void) void reset_cpu(ulong addr) { + u8 val; + + i2c_set_bus_num(3); /* PowerIC connected to ch3 */ + i2c_init(400000, 0); + i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); + val |= 0x02; + i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); } |