Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

6 files changed, 793 insertions, 0 deletions

diff --git a/board/renesas/ap325rxa/Makefile b/board/renesas/ap325rxa/Makefile
new file mode 100644
index 0000000..21f3e6e
--- /dev/null
+++ b/board/renesas/ap325rxa/Makefile
@@ -0,0 +1,51 @@
+#########################################################################
+#
+# Copyright (C) 2008 Renesas Solutions Corp.
+# Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+#
+# board/ap325rxa/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= ap325rxa.o cpld-ap325rxa.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/renesas/ap325rxa/ap325rxa.c b/board/renesas/ap325rxa/ap325rxa.c
new file mode 100644
index 0000000..9f1112a
--- /dev/null
+++ b/board/renesas/ap325rxa/ap325rxa.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+/* PRI control register */
+#define PRPRICR5	0xFF800048 /* LMB */
+#define PRPRICR5_D	0x2a
+
+/* FPGA control */
+#define FPGA_NAND_CTL	0xB410020C
+#define FPGA_NAND_RST	0x0008
+#define FPGA_NAND_INIT	0x0000
+#define FPGA_NAND_RST_WAIT	10000
+
+/* I/O port data */
+#define PACR_D	0x0000
+#define PBCR_D	0x0000
+#define PCCR_D	0x1000
+#define PDCR_D	0x0000
+#define PECR_D	0x0410
+#define PFCR_D	0xffff
+#define PGCR_D	0x0000
+#define PHCR_D	0x5011
+#define PJCR_D	0x4400
+#define PKCR_D	0x7c00
+#define PLCR_D	0x0000
+#define PMCR_D	0x0000
+#define PNCR_D	0x0000
+#define PQCR_D	0x0000
+#define PRCR_D	0x0000
+#define PSCR_D	0x0000
+#define PTCR_D	0x0010
+#define PUCR_D	0x0fff
+#define PVCR_D	0xffff
+#define PWCR_D	0x0000
+#define PXCR_D	0x7500
+#define PYCR_D	0x0000
+#define PZCR_D	0x5540
+
+/* Pin Function Controler data */
+#define PSELA_D	0x1410
+#define PSELB_D	0x0140
+#define PSELC_D	0x0000
+#define PSELD_D	0x0400
+
+/* I/O Buffer Hi-Z data */
+#define	HIZCRA_D	0x0000
+#define HIZCRB_D	0x1000
+#define HIZCRC_D	0x0000
+#define HIZCRD_D	0x0000
+
+/* Module select reg data */
+#define MSELCRA_D	0x0014
+#define MSELCRB_D	0x0018
+
+/* Module Stop reg Data */
+#define MSTPCR2_D	0xFFD9F280
+
+/* CPLD loader */
+extern void init_cpld(void);
+
+int checkboard(void)
+{
+	puts("BOARD: AP325RXA\n");
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Pin Function Controler Init */
+	outw(PSELA_D, PSELA);
+	outw(PSELB_D, PSELB);
+	outw(PSELC_D, PSELC);
+	outw(PSELD_D, PSELD);
+
+	/* I/O Buffer Hi-Z Init */
+	outw(HIZCRA_D, HIZCRA);
+	outw(HIZCRB_D, HIZCRB);
+	outw(HIZCRC_D, HIZCRC);
+	outw(HIZCRD_D, HIZCRD);
+
+	/* Module select reg Init */
+	outw(MSELCRA_D, MSELCRA);
+	outw(MSELCRB_D, MSELCRB);
+
+	/* Module Stop reg Init */
+	outl(MSTPCR2_D, MSTPCR2);
+
+	/* I/O ports */
+	outw(PACR_D, PACR);
+	outw(PBCR_D, PBCR);
+	outw(PCCR_D, PCCR);
+	outw(PDCR_D, PDCR);
+	outw(PECR_D, PECR);
+	outw(PFCR_D, PFCR);
+	outw(PGCR_D, PGCR);
+	outw(PHCR_D, PHCR);
+	outw(PJCR_D, PJCR);
+	outw(PKCR_D, PKCR);
+	outw(PLCR_D, PLCR);
+	outw(PMCR_D, PMCR);
+	outw(PNCR_D, PNCR);
+	outw(PQCR_D, PQCR);
+	outw(PRCR_D, PRCR);
+	outw(PSCR_D, PSCR);
+	outw(PTCR_D, PTCR);
+	outw(PUCR_D, PUCR);
+	outw(PVCR_D, PVCR);
+	outw(PWCR_D, PWCR);
+	outw(PXCR_D, PXCR);
+	outw(PYCR_D, PYCR);
+	outw(PZCR_D, PZCR);
+
+	/* PRI control register Init */
+	outl(PRPRICR5_D, PRPRICR5);
+
+	/* cpld init */
+	init_cpld();
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+	return 0;
+}
+
+void led_set_state(unsigned short value)
+{
+}
+
+void ide_set_reset(int idereset)
+{
+	outw(FPGA_NAND_RST, FPGA_NAND_CTL);	/* NAND RESET */
+	udelay(FPGA_NAND_RST_WAIT);
+	outw(FPGA_NAND_INIT, FPGA_NAND_CTL);
+}
diff --git a/board/renesas/ap325rxa/config.mk b/board/renesas/ap325rxa/config.mk
new file mode 100644
index 0000000..b52a5e5
--- /dev/null
+++ b/board/renesas/ap325rxa/config.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x8FFC0000
diff --git a/board/renesas/ap325rxa/cpld-ap325rxa.c b/board/renesas/ap325rxa/cpld-ap325rxa.c
new file mode 100644
index 0000000..16fadcb
--- /dev/null
+++ b/board/renesas/ap325rxa/cpld-ap325rxa.c
@@ -0,0 +1,206 @@
+/***************************************************************
+ * Project:
+ *	  CPLD SlaveSerial Configuration via embedded microprocessor.
+ *
+ * Copyright info:
+ *
+ *	  This is free software; you can redistribute it and/or modify
+ *	  it as you like.
+ *
+ *	  This program is distributed in the hope that it will be useful,
+ *	  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Description:
+ *
+ *      This is the main source file that will allow a microprocessor
+ *      to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II,
+ *      and Spartan-II devices via the SlaveSerial Configuration Mode.
+ *      This code is discussed in Xilinx Application Note, XAPP502.
+ *
+ * History:
+ *	  3-October-2001  MN/MP  - Created
+ *	  20-August-2008  Renesas Solutions - Modified to SH7723
+ ****************************************************************/
+
+#include <common.h>
+
+/* Serial */
+#define SCIF_BASE 0xffe00000 /* SCIF0 */
+#define SCSMR	(vu_short *)(SCIF_BASE + 0x00)
+#define SCBRR	(vu_char *)(SCIF_BASE + 0x04)
+#define SCSCR	(vu_short *)(SCIF_BASE + 0x08)
+#define SC_TDR	(vu_char *)(SCIF_BASE + 0x0C)
+#define SC_SR	(vu_short *)(SCIF_BASE + 0x10)
+#define SCFCR	(vu_short *)(SCIF_BASE + 0x18)
+#define	RFCR	(vu_long *)0xFE400020
+
+#define SCSCR_INIT		0x0038
+#define SCSCR_CLR		0x0000
+#define SCFCR_INIT		0x0006
+#define SCSMR_INIT		0x0080
+#define RFCR_CLR		0xA400
+#define SCI_TD_E		0x0020
+#define SCI_TDRE_CLEAR	0x00df
+
+#define BPS_SETTING_VALUE	1 /* 12.5MHz */
+#define WAIT_RFCR_COUNTER	500
+
+/* CPLD data size */
+#define CPLD_DATA_SIZE	169216
+
+/* out */
+#define CPLD_PFC_ADR	((vu_short *)0xA4050112)
+
+#define CPLD_PROG_ADR	((vu_char *)0xA4050132)
+#define CPLD_PROG_DAT	0x80
+
+/* in */
+#define CPLD_INIT_ADR	((vu_char *)0xA4050132)
+#define CPLD_INIT_DAT	0x40
+#define CPLD_DONE_ADR	((vu_char *)0xA4050132)
+#define CPLD_DONE_DAT	0x20
+
+#define	HIZCRB			((vu_short *)0xA405015A)
+
+/* data */
+#define CPLD_NOMAL_START	0xA0A80000
+#define CPLD_SAFE_START		0xA0AC0000
+#define MODE_SW				(vu_char *)0xA405012A
+
+static void init_cpld_loader(void)
+{
+
+	*SCSCR = SCSCR_CLR;
+	*SCFCR = SCFCR_INIT;
+	*SCSMR = SCSMR_INIT;
+
+	*SCBRR = BPS_SETTING_VALUE;
+
+	*RFCR = RFCR_CLR; /* Refresh counter clear */
+
+	while (*RFCR < WAIT_RFCR_COUNTER)
+		;
+
+	*SCFCR = 0x0; /* RTRG=00, TTRG=00 */
+				  /* MCE=0,TFRST=0,RFRST=0,LOOP=0 */
+	*SCSCR = SCSCR_INIT;
+}
+
+static int check_write_ready(void)
+{
+	u16 status = *SC_SR;
+	return status & SCI_TD_E;
+}
+
+static void write_cpld_data(char ch)
+{
+	while (!check_write_ready())
+		;
+
+	*SC_TDR = ch;
+	*SC_SR;
+	*SC_SR = SCI_TDRE_CLEAR;
+}
+
+static int delay(void)
+{
+	int i;
+	int c = 0;
+	for (i = 0; i < 200; i++) {
+		c = *(volatile int *)0xa0000000;
+	}
+	return c;
+}
+
+/***********************************************************************
+ *
+ * Function:     slave_serial
+ *
+ * Description:  Initiates SlaveSerial Configuration.
+ *               Calls ShiftDataOut() to output serial data
+ *
+ ***********************************************************************/
+static void slave_serial(void)
+{
+	int i;
+	unsigned char *flash;
+
+	*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
+	delay();
+
+	/*
+	 * Toggle Program Pin by Toggling Program_OE bit
+	 * This is accomplished by writing to the Program Register in the CPLD
+	 *
+	 * NOTE: The Program_OE bit should be driven high to bring the Virtex
+	 *      Program Pin low. Likewise, it should be driven low
+	 *      to bring the Virtex Program Pin to High-Z
+	 */
+
+	*CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */
+	delay();
+
+	/*
+	 * Bring Program High-Z
+	 * (Drive Program_OE bit low to bring Virtex Program Pin to High-Z
+	 */
+
+	/* Program_OE bit Low brings the Virtex Program Pin to High Z: */
+	*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
+
+	while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0)
+		delay();
+
+	/* Begin Slave-Serial Configuration */
+	flash = (unsigned char *)CPLD_NOMAL_START;
+
+	for (i = 0; i < CPLD_DATA_SIZE; i++)
+		write_cpld_data(*flash++);
+}
+
+/***********************************************************************
+ *
+ * Function: check_done_bit
+ *
+ * Description: This function takes monitors the CPLD Input Register
+ * 		   by checking the status of the DONE bit in that Register.
+ *               By doing so, it monitors the Xilinx Virtex device's DONE
+ *               Pin to see if configuration bitstream has been properly
+ *               loaded
+ *
+ ***********************************************************************/
+static void check_done_bit(void)
+{
+	while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT))
+		;
+}
+
+/***********************************************************************
+ *
+ * Function: init_cpld
+ *
+ * Description: Begins Slave Serial configuration of Xilinx FPGA
+ *
+ ***********************************************************************/
+void init_cpld(void)
+{
+	/* Init serial device */
+	init_cpld_loader();
+
+	if (*CPLD_DONE_ADR & CPLD_DONE_DAT)	/* Already DONE */
+		return;
+
+	*HIZCRB = 0x0000;
+	*CPLD_PFC_ADR = 0x7c00;			/* FPGA PROG = OUTPUT */
+
+	/* write CPLD data from NOR flash to device */
+	slave_serial();
+
+	/*
+	 * Monitor the DONE bit in the CPLD Input Register to see if
+	 * configuration successful
+	 */
+
+	check_done_bit();
+}
diff --git a/board/renesas/ap325rxa/lowlevel_init.S b/board/renesas/ap325rxa/lowlevel_init.S
new file mode 100644
index 0000000..4f66588
--- /dev/null
+++ b/board/renesas/ap325rxa/lowlevel_init.S
@@ -0,0 +1,243 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * board/ap325rxa/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+
+/*
+ * Board specific low level init code, called _very_ early in the
+ * startup sequence. Relocation to SDRAM has not happened yet, no
+ * stack is available, bss section has not been initialised, etc.
+ *
+ * (Note: As no stack is available, no subroutines can be called...).
+ */
+
+	.global	lowlevel_init
+
+	.text
+	.align	2
+
+lowlevel_init:
+	mov.l	DRVCRA_A, r1
+	mov.l 	DRVCRA_D, r0
+	mov.w	r0, @r1
+
+	mov.l	DRVCRB_A, r1
+	mov.l 	DRVCRB_D, r0
+	mov.w	r0, @r1
+
+	mov.l	RWTCSR_A, r1
+	mov.l 	RWTCSR_D1, r0
+	mov.w	r0, @r1
+
+	mov.l	RWTCNT_A, r1
+	mov.l 	RWTCNT_D, r0
+	mov.w	r0, @r1
+
+	mov.l	RWTCSR_A, r1
+	mov.l 	RWTCSR_D2, r0
+	mov.w	r0, @r1
+
+	mov.l	FRQCR_A, r1
+	mov.l 	FRQCR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	CMNCR_A, r1
+	mov.l	CMNCR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	CS0BCR_A ,r1
+	mov.l	CS0BCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS4BCR_A ,r1
+	mov.l	CS4BCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS5ABCR_A ,r1
+	mov.l	CS5ABCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS5BBCR_A ,r1
+	mov.l	CS5BBCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS6ABCR_A ,r1
+	mov.l	CS6ABCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS6BBCR_A ,r1
+	mov.l	CS6BBCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS0WCR_A ,r1
+	mov.l	CS0WCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS4WCR_A ,r1
+	mov.l	CS4WCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS5AWCR_A ,r1
+	mov.l	CS5AWCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS5BWCR_A ,r1
+	mov.l	CS5BWCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS6AWCR_A ,r1
+	mov.l	CS6AWCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS6BWCR_A ,r1
+	mov.l	CS6BWCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_SDCR_A, r1
+	mov.l 	SBSC_SDCR_D1, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_SDWCR_A, r1
+	mov.l 	SBSC_SDWCR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_SDPCR_A, r1
+	mov.l 	SBSC_SDPCR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_RTCSR_A, r1
+	mov.l 	SBSC_RTCSR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_RTCNT_A, r1
+	mov.l 	SBSC_RTCNT_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_RTCOR_A, r1
+	mov.l 	SBSC_RTCOR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_SDMR3_A1, r1
+	mov.l 	SBSC_SDMR3_D, r0
+	mov.b	r0, @r1
+
+	mov.l	SBSC_SDMR3_A2, r1
+	mov.l 	SBSC_SDMR3_D, r0
+	mov.b	r0, @r1
+
+	mov.l	SLEEP_CNT, r1
+2:	tst	r1, r1
+	nop
+	bf/s	2b
+	dt	r1
+
+	mov.l	SBSC_SDMR3_A3, r1
+	mov.l 	SBSC_SDMR3_D, r0
+	mov.b	r0, @r1
+
+	mov.l	SBSC_SDCR_A, r1
+	mov.l 	SBSC_SDCR_D2, r0
+	mov.l	r0, @r1
+
+	mov.l	CCR_A, r1
+	mov.l 	CCR_D, r0
+	mov.l	r0, @r1
+
+	! BL bit off (init = ON)  (?!?)
+
+	stc	sr, r0				! BL bit off(init=ON)
+	mov.l	SR_MASK_D, r1
+	and	r1, r0
+	ldc	r0, sr
+
+	rts
+	 mov	#0, r0
+
+	.align	2
+
+DRVCRA_A:	.long	DRVCRA
+DRVCRB_A:	.long	DRVCRB
+DRVCRA_D:	.long	0x4555
+DRVCRB_D:	.long	0x0005
+
+RWTCSR_A:	.long	RWTCSR
+RWTCNT_A:	.long	RWTCNT
+FRQCR_A:	.long	FRQCR
+RWTCSR_D1:	.long	0xa507
+RWTCSR_D2:	.long	0xa504
+RWTCNT_D:	.long	0x5a00
+FRQCR_D:	.long	0x0b04474a
+
+SBSC_SDCR_A:	.long	SBSC_SDCR
+SBSC_SDWCR_A:	.long	SBSC_SDWCR
+SBSC_SDPCR_A:	.long	SBSC_SDPCR
+SBSC_RTCSR_A:	.long	SBSC_RTCSR
+SBSC_RTCNT_A:	.long	SBSC_RTCNT
+SBSC_RTCOR_A:	.long	SBSC_RTCOR
+SBSC_SDMR3_A1:	.long	0xfe510000
+SBSC_SDMR3_A2:	.long	0xfe500242
+SBSC_SDMR3_A3:	.long	0xfe5c0042
+
+SBSC_SDCR_D1:	.long	0x92810112
+SBSC_SDCR_D2:	.long	0x92810912
+SBSC_SDWCR_D:	.long	0x05162482
+SBSC_SDPCR_D:	.long	0x00300087
+SBSC_RTCSR_D:	.long	0xa55a0212
+SBSC_RTCNT_D:	.long	0xa55a0000
+SBSC_RTCOR_D:	.long	0xa55a0040
+SBSC_SDMR3_D:	.long	0x00
+
+CMNCR_A:	.long	CMNCR
+CS0BCR_A:	.long	CS0BCR
+CS4BCR_A:	.long	CS4BCR
+CS5ABCR_A:	.long 	CS5ABCR
+CS5BBCR_A:	.long	CS5BBCR
+CS6ABCR_A:	.long	CS6ABCR
+CS6BBCR_A:	.long	CS6BBCR
+CS0WCR_A:	.long	CS0WCR
+CS4WCR_A:	.long	CS4WCR
+CS5AWCR_A:	.long	CS5AWCR
+CS5BWCR_A:	.long	CS5BWCR
+CS6AWCR_A:	.long	CS6AWCR
+CS6BWCR_A:	.long	CS6BWCR
+
+CMNCR_D:	.long	0x00000013
+CS0BCR_D:	.long	0x24920400
+CS4BCR_D:	.long	0x24920400
+CS5ABCR_D:	.long	0x24920400
+CS5BBCR_D:	.long	0x7fff0600
+CS6ABCR_D:	.long	0x24920400
+CS6BBCR_D:	.long	0x24920600
+CS0WCR_D:	.long	0x00000480
+CS4WCR_D:	.long	0x00000480
+CS5AWCR_D:	.long	0x00000380
+CS5BWCR_D:	.long	0x00000600
+CS6AWCR_D:	.long	0x00000300
+CS6BWCR_D:	.long	0x00000540
+
+CCR_A:		.long	0xff00001c
+CCR_D:		.long	0x0000090d
+
+SLEEP_CNT:	.long	0x00000800
+SR_MASK_D:	.long	0xEFFFFF0F
diff --git a/board/renesas/ap325rxa/u-boot.lds b/board/renesas/ap325rxa/u-boot.lds
new file mode 100644
index 0000000..e9f8dc0
--- /dev/null
+++ b/board/renesas/ap325rxa/u-boot.lds
@@ -0,0 +1,105 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+	/*
+	   Base address of internal SDRAM is 0x88000000.
+	   Although size of SDRAM can be either 16 or 32 MBytes,
+	   we assume 16 MBytes (ie ignore upper half if the full
+	   32 MBytes is present).
+
+	   NOTE: This address must match with the definition of
+	   TEXT_BASE in config.mk (in this directory).
+
+	*/
+	. = 0x88000000 + (128*1024*1024) - (256*1024);
+
+	PROVIDE (reloc_dst = .);
+
+	PROVIDE (_ftext = .);
+	PROVIDE (_fcode = .);
+	PROVIDE (_start = .);
+
+	.text :
+	{
+		cpu/sh4/start.o		(.text)
+		. = ALIGN(8192);
+		common/env_embedded.o	(.ppcenv)
+		. = ALIGN(8192);
+		common/env_embedded.o	(.ppcenvr)
+		. = ALIGN(8192);
+		*(.text)
+		. = ALIGN(4);
+	} =0xFF
+	PROVIDE (_ecode = .);
+	.rodata :
+	{
+		*(.rodata)
+		. = ALIGN(4);
+	}
+	PROVIDE (_etext = .);
+
+
+	PROVIDE (_fdata = .);
+	.data :
+	{
+		*(.data)
+		. = ALIGN(4);
+	}
+	PROVIDE (_edata = .);
+
+	PROVIDE (_fgot = .);
+	.got :
+	{
+		*(.got)
+		. = ALIGN(4);
+	}
+	PROVIDE (_egot = .);
+
+	PROVIDE (__u_boot_cmd_start = .);
+	.u_boot_cmd :
+	{
+		*(.u_boot_cmd)
+		. = ALIGN(4);
+	}
+	PROVIDE (__u_boot_cmd_end = .);
+
+	PROVIDE (reloc_dst_end = .);
+	/* _reloc_dst_end = .; */
+
+	PROVIDE (bss_start = .);
+	PROVIDE (__bss_start = .);
+	.bss :
+	{
+		*(.bss)
+		. = ALIGN(4);
+	}
+	PROVIDE (bss_end = .);
+
+	PROVIDE (_end = .);
+}