rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 20 insertions, 20 deletions

diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c
index c51e412..b502e4d 100644
--- a/board/r360mpi/r360mpi.c
+++ b/board/r360mpi/r360mpi.c
@@ -105,7 +105,7 @@ static long int dram_size (long int, long int *, long int);
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size8, size9;
 	long int size_b0 = 0;
@@ -120,7 +120,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -129,10 +129,10 @@ phys_size_t initdram (int board_type)
 	 * preliminary address - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -152,7 +152,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -160,7 +160,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
@@ -168,7 +168,7 @@ phys_size_t initdram (int board_type)
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {			/* back to 8 columns            */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -181,7 +181,7 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
@@ -189,20 +189,20 @@ phys_size_t initdram (int board_type)
 	 * Final mapping
 	 */
 
-	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	/* adjust refresh rate depending on SDRAM type, one bank */
 	reg = memctl->memc_mptpr;
-	reg >>= 1;		/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	reg >>= 1;		/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 	memctl->memc_mptpr = reg;
 
 	udelay (10000);
 
 #ifdef CONFIG_CAN_DRIVER
 	/* Initialize OR3 / BR3 */
-	memctl->memc_or3 = CFG_OR3_CAN;		/* switch GPLB_5 to GPLA_5 */
-	memctl->memc_br3 = CFG_BR3_CAN;
+	memctl->memc_or3 = CONFIG_SYS_OR3_CAN;		/* switch GPLB_5 to GPLA_5 */
+	memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
 
 	/* Initialize MBMR */
 	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* GPL_B4 works as UPWAITB */
@@ -256,7 +256,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value,
 			   long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -268,7 +268,7 @@ static long int dram_size (long int mamr_value,
 
 void r360_i2c_lcd_write (uchar data0, uchar data1)
 {
-	if (i2c_write (CFG_I2C_LCD_ADDR, data0, 1, &data1, 1)) {
+	if (i2c_write (CONFIG_SYS_I2C_LCD_ADDR, data0, 1, &data1, 1)) {
 		printf("Can't write lcd data 0x%02X 0x%02X.\n", data0, data1);
 	}
 }
@@ -292,9 +292,9 @@ int misc_init_r (void)
 	char *str;
 	int i;
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
-	i2c_read (CFG_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN);
+	i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN);
 
 	for (i = 0; i < KEYBD_DATALEN; ++i) {
 		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
@@ -397,10 +397,10 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	uchar keybd_env[2 * KEYBD_DATALEN + 1];
 	int i;
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/* Read keys */
-	i2c_read (CFG_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN);
+	i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN);
 
 	puts ("Keys:");
 	for (i = 0; i < KEYBD_DATALEN; ++i) {