summaryrefslogtreecommitdiff
path: root/board/prodrive
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2006-11-27 14:12:17 +0100
committerStefan Roese <sr@denx.de>2006-11-27 14:12:17 +0100
commit1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 (patch)
treeda4f0c35f18200eab6953d163866bdb11a9eb6c6 /board/prodrive
parent48c7d6dba9140869a1d644248aa8cfabe01c98a6 (diff)
downloadu-boot-imx-1c2ce2262069510f31c7d3fd7efd3d58b8c0c148.zip
u-boot-imx-1c2ce2262069510f31c7d3fd7efd3d58b8c0c148.tar.gz
u-boot-imx-1c2ce2262069510f31c7d3fd7efd3d58b8c0c148.tar.bz2
[PATCH] Update Prodrive ALPR board support (440GX)
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/prodrive')
-rw-r--r--board/prodrive/alpr/Makefile4
-rw-r--r--board/prodrive/alpr/alpr.c100
-rw-r--r--board/prodrive/alpr/fpga.c79
-rw-r--r--board/prodrive/alpr/init.S1
-rw-r--r--board/prodrive/alpr/nand.c16
5 files changed, 118 insertions, 82 deletions
diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile
index 1024a41..00dc180 100644
--- a/board/prodrive/alpr/Makefile
+++ b/board/prodrive/alpr/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o flash.o fpga.o nand.o
+COBJS = $(BOARD).o fpga.o nand.o
SOBJS = init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
@@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index e8435bf..2389561 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -26,6 +26,7 @@
#include <asm/processor.h>
#include <spd_sdram.h>
#include <ppc4xx_enet.h>
+#include <miiphy.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -33,24 +34,14 @@ extern int alpr_fpga_init(void);
int board_early_init_f (void)
{
- unsigned long mfr;
-
- /*-------------------------------------------------------------------------+
- | Initialize EBC CONFIG
- +-------------------------------------------------------------------------*/
-#if 0
- mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
- EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK |
- EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
- EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
- EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
-#else
+ /*-------------------------------------------------------------------------
+ * Initialize EBC CONFIG
+ *-------------------------------------------------------------------------*/
mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
-#endif
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
@@ -58,8 +49,8 @@ int board_early_init_f (void)
mtdcr (uic0sr, 0xffffffff); /* clear all */
mtdcr (uic0er, 0x00000000); /* disable all */
mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr (uic0pr, 0xfffffe03); /* per manual */
+ mtdcr (uic0tr, 0x01c00000); /* per manual */
mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
mtdcr (uic0sr, 0xffffffff); /* clear all */
@@ -85,12 +76,57 @@ int board_early_init_f (void)
mtdcr (uicb0pr, 0xfc000000); /* */
mtdcr (uicb0tr, 0x00000000); /* */
mtdcr (uicb0vr, 0x00000001); /* */
- mfsdr (sdr_mfr, mfr);
- mfr &= ~SDR0_MFR_ECS_MASK;
+
+ /* Setup GPIO/IRQ multiplexing */
+ mtsdr(sdr_pfc0, 0x01a03e00);
return 0;
}
+int last_stage_init(void)
+{
+ unsigned short reg;
+
+ /*
+ * Configure LED's of both Marvell 88E1111 PHY's
+ *
+ * This has to be done after the 4xx ethernet driver is loaded,
+ * so "last_stage_init()" is the right place.
+ */
+ miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, &reg);
+ reg |= 0x0001;
+ miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg);
+ miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, &reg);
+ reg |= 0x0001;
+ miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg);
+
+ return 0;
+}
+
+static int board_rev(void)
+{
+ int rev;
+ u32 pfc0;
+
+ /* Setup GPIO14 & 15 as GPIO */
+ mfsdr(sdr_pfc0, pfc0);
+ pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1;
+ mtsdr(sdr_pfc0, pfc0);
+
+ /* Setup as input */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
+ out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
+
+ rev = (in32(GPIO0_IR) >> 16) & 0x3;
+
+ /* Setup GPIO14 & 15 as non GPIO again */
+ mfsdr(sdr_pfc0, pfc0);
+ pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1);
+ mtsdr(sdr_pfc0, pfc0);
+
+ return rev;
+}
+
int checkboard (void)
{
char *s = getenv ("serial#");
@@ -100,7 +136,7 @@ int checkboard (void)
puts (", serial# ");
puts (s);
}
- putc ('\n');
+ printf(" (Rev. %d)\n", board_rev());
return (0);
}
@@ -224,10 +260,26 @@ void pci_target_init(struct pci_controller * hose )
*
************************************************************************/
#if defined(CONFIG_PCI)
+
+static void wait_for_pci_ready(void)
+{
+ /*
+ * Configure EREADY as input
+ */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY);
+ udelay(1000);
+
+ for (;;) {
+ if (in32(GPIO0_IR) & CFG_GPIO_EREADY)
+ return;
+ }
+
+}
+
int is_pci_host(struct pci_controller *hose)
{
- /* The ocotea board is always configured as host. */
- return(1);
+ wait_for_pci_ready();
+ return 1; /* return 1 for host controller */
}
#endif /* defined(CONFIG_PCI) */
@@ -274,11 +326,3 @@ int post_hotkeys_pressed(void)
return (ctrlc());
}
#endif
-
-void board_reset(void)
-{
- /*
- * Initiate chip reset in debug control register DBCR
- */
- mtspr(dbcr0, 0x20000000);
-}
diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c
index 78307b4..e94360f 100644
--- a/board/prodrive/alpr/fpga.c
+++ b/board/prodrive/alpr/fpga.c
@@ -36,7 +36,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if (CONFIG_FPGA)
+#if defined(CONFIG_FPGA)
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
@@ -44,46 +44,38 @@ DECLARE_GLOBAL_DATA_PTR;
#define PRINTF(fmt,args...)
#endif
-static unsigned long regval;
+static unsigned long regval;
-#define SET_GPIO_REG_0(reg, bit) {\
- regval = in32(reg);\
- regval &= ~(0x80000000 >> bit);\
- out32(reg, regval);\
- }
-
-#define SET_GPIO_REG_1(reg, bit) {\
- regval = in32(reg);\
- regval |= (0x80000000 >> bit);\
- out32(reg, regval);\
- }
-
-#define GPIO_CLK_PIN 0x00002000
-#define GPIO_CLK_PIN_I 0xffffdfff
-#define GPIO_DAT_PIN 0x00001000
-#define GPIO_DAT_PIN_I 0xffffefff
-#define GPIO_CLKDAT_PIN_I 0xffffcfff
+#define SET_GPIO_REG_0(reg, bit) { \
+ regval = in32(reg); \
+ regval &= ~(0x80000000 >> bit); \
+ out32(reg, regval); \
+ }
-#define SET_GPIO_CLK_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLK_PIN_I);
-#define SET_GPIO_CLK_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_CLK_PIN);
-#define SET_GPIO_DAT_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_DAT_PIN_I);
-#define SET_GPIO_DAT_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_DAT_PIN);
+#define SET_GPIO_REG_1(reg, bit) { \
+ regval = in32(reg); \
+ regval |= (0x80000000 >> bit); \
+ out32(reg, regval); \
+ }
-#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit)
-#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit)
+#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit)
+#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit)
-#define SET_GPIO_CLK_0_Z1 out32(GPIO0_OR, (in32(GPIO0_OR) & GPIO_CLK_PIN_I) | GPIO_DAT_PIN);
-#define SET_GPIO_CLK_0_Z0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLKDAT_PIN_I);
+#define FPGA_PRG (0x80000000 >> CFG_GPIO_PROG_EN)
+#define FPGA_CONFIG (0x80000000 >> CFG_GPIO_CONFIG)
+#define FPGA_DATA (0x80000000 >> CFG_GPIO_DATA)
+#define FPGA_CLK (0x80000000 >> CFG_GPIO_CLK)
+#define OLD_VAL (FPGA_PRG | FPGA_CONFIG)
-#define FPGA_WRITE_1 { \
- SET_GPIO_CLK_0_Z1\
- SET_GPIO_CLK_1}
+#define SET_FPGA(data) out32(GPIO0_OR, data)
-#define FPGA_WRITE_0 { \
- SET_GPIO_CLK_0_Z0\
- SET_GPIO_CLK_1}
+#define FPGA_WRITE_1 { \
+ SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \
+ SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
-#define P_GP(reg) (reg & 0x00023f00)
+#define FPGA_WRITE_0 { \
+ SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \
+ SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */
/* Plattforminitializations */
/* Here we have to set the FPGA Chain */
@@ -102,7 +94,7 @@ int fpga_pre_fn (int cookie)
SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR);
SET_GPIO_0((CFG_GPIO_SEL_DPR));
- /* initialize the GPIO Pins */
+ /* initialize the GPIO Pins */
/* output */
SET_GPIO_0(CFG_GPIO_CLK);
SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK);
@@ -174,7 +166,7 @@ int fpga_done_fn (int cookie)
}
/* writes the complete buffer to the FPGA
- writing the complete buffer in one function is very faster,
+ writing the complete buffer in one function is much faster,
then calling it for every bit */
int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
{
@@ -182,14 +174,10 @@ int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
unsigned char *data = (unsigned char *) buf;
unsigned char val=0;
int i;
+ int len_40 = len / 40;
while (bytecount < len) {
-#ifdef CFG_FPGA_CHECK_CTRLC
- if (ctrlc ()) {
- return FPGA_FAIL;
- }
-#endif
- val = data[bytecount ++ ];
+ val = data[bytecount++];
i = 8;
do {
if (val & 0x01) {
@@ -202,8 +190,13 @@ int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
} while (i > 0);
#ifdef CFG_FPGA_PROG_FEEDBACK
- if (bytecount % (len / 40) == 0)
+ if (bytecount % len_40 == 0) {
putc ('.'); /* let them know we are alive */
+#ifdef CFG_FPGA_CHECK_CTRLC
+ if (ctrlc ())
+ return FPGA_FAIL;
+#endif
+ }
#endif
}
return FPGA_SUCCESS;
diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S
index 1baa609..135674c 100644
--- a/board/prodrive/alpr/init.S
+++ b/board/prodrive/alpr/init.S
@@ -34,7 +34,6 @@
#define SZ_64K 0x00000030
#define SZ_256K 0x00000040
#define SZ_1M 0x00000050
-#define SZ_8M 0x00000060
#define SZ_16M 0x00000070
#define SZ_256M 0x00000090
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index 20a8098..e63c921 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -32,19 +32,19 @@
#include <nand.h>
struct alpr_ndfc_regs {
- u16 cmd[4];
- u16 addr_wait;
- u16 term;
- u16 dummy;
- u16 dummy2;
- u16 data;
+ u8 cmd[4];
+ u8 addr_wait;
+ u8 term;
+ u8 dummy;
+ u8 dummy2;
+ u8 data;
};
static u8 hwctl;
static struct alpr_ndfc_regs *alpr_ndfc = NULL;
-#define readb(addr) (u8)(*(volatile u16 *)(addr))
-#define writeb(d,addr) *(volatile u16 *)(addr) = ((u16)(d))
+#define readb(addr) (u8)(*(volatile u8 *)(addr))
+#define writeb(d,addr) *(volatile u8 *)(addr) = ((u8)(d))
/*
* The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to