Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next

4 files changed, 69 insertions, 95 deletions

diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index 131a62d..cc491d0 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -48,36 +48,48 @@ int board_early_init_f (void)
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
 	 *-------------------------------------------------------------------*/
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-	mtdcr (uic0er, 0x00000000);	/* disable all */
-	mtdcr (uic0cr, 0x00000009);	/* SMI & UIC1 crit are critical */
-	mtdcr (uic0pr, 0xfffffe03);	/* per manual */
-	mtdcr (uic0tr, 0x01c00000);	/* per manual */
-	mtdcr (uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-
+	/*
+	 * Because of the interrupt handling rework to handle 440GX interrupts
+	 * with the common code, we needed to change names of the UIC registers.
+	 * Here the new relationship:
+	 *
+	 * U-Boot name	440GX name
+	 * -----------------------
+	 * UIC0		UICB0
+	 * UIC1		UIC0
+	 * UIC2		UIC1
+	 * UIC3		UIC2
+	 */
 	mtdcr (uic1sr, 0xffffffff);	/* clear all */
 	mtdcr (uic1er, 0x00000000);	/* disable all */
-	mtdcr (uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr (uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr (uic1cr, 0x00000009);	/* SMI & UIC1 crit are critical */
+	mtdcr (uic1pr, 0xfffffe03);	/* per manual */
+	mtdcr (uic1tr, 0x01c00000);	/* per manual */
 	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
 	mtdcr (uic1sr, 0xffffffff);	/* clear all */
 
 	mtdcr (uic2sr, 0xffffffff);	/* clear all */
 	mtdcr (uic2er, 0x00000000);	/* disable all */
 	mtdcr (uic2cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic2pr, 0xffffffff);	/* per ref-board manual */
-	mtdcr (uic2tr, 0x00ff8c0f);	/* per ref-board manual */
+	mtdcr (uic2pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr (uic2tr, 0x00ffc000);	/* per ref-board manual */
 	mtdcr (uic2vr, 0x00000001);	/* int31 highest, base=0x000 */
 	mtdcr (uic2sr, 0xffffffff);	/* clear all */
 
-	mtdcr (uicb0sr, 0xfc000000); /* clear all */
-	mtdcr (uicb0er, 0x00000000); /* disable all */
-	mtdcr (uicb0cr, 0x00000000); /* all non-critical */
-	mtdcr (uicb0pr, 0xfc000000); /* */
-	mtdcr (uicb0tr, 0x00000000); /* */
-	mtdcr (uicb0vr, 0x00000001); /* */
+	mtdcr (uic3sr, 0xffffffff);	/* clear all */
+	mtdcr (uic3er, 0x00000000);	/* disable all */
+	mtdcr (uic3cr, 0x00000000);	/* all non-critical */
+	mtdcr (uic3pr, 0xffffffff);	/* per ref-board manual */
+	mtdcr (uic3tr, 0x00ff8c0f);	/* per ref-board manual */
+	mtdcr (uic3vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr (uic3sr, 0xffffffff);	/* clear all */
+
+	mtdcr (uic0sr, 0xfc000000); /* clear all */
+	mtdcr (uic0er, 0x00000000); /* disable all */
+	mtdcr (uic0cr, 0x00000000); /* all non-critical */
+	mtdcr (uic0pr, 0xfc000000); /* */
+	mtdcr (uic0tr, 0x00000000); /* */
+	mtdcr (uic0vr, 0x00000001); /* */
 
 	/* Setup shutdown/SSD empty interrupt as inputs */
 	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index 097e183..99f5737 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -56,43 +56,24 @@ static struct alpr_ndfc_regs *alpr_ndfc = NULL;
  *
  * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte).
  */
-static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	switch (cmd) {
-	case NAND_CTL_SETCLE:
-		hwctl |= 0x1;
-		break;
-	case NAND_CTL_CLRCLE:
-		hwctl &= ~0x1;
-		break;
-	case NAND_CTL_SETALE:
-		hwctl |= 0x2;
-		break;
-	case NAND_CTL_CLRALE:
-		hwctl &= ~0x2;
-		break;
-	case NAND_CTL_SETNCE:
-		break;
-	case NAND_CTL_CLRNCE:
-		writeb(0x00, &(alpr_ndfc->term));
-		break;
-	}
-}
-
-static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
-	struct nand_chip *nand = mtd->priv;
+	struct nand_chip *this = mtd->priv;
 
-	if (hwctl & 0x1)
-		/*
-		 * IO_ADDR_W used as CMD[i] reg to support multiple NAND
-		 * chips.
-		 */
-		writeb(byte, nand->IO_ADDR_W);
-	else if (hwctl & 0x2) {
-		writeb(byte, &(alpr_ndfc->addr_wait));
-	} else
-		writeb(byte, &(alpr_ndfc->data));
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if ( ctrl & NAND_CLE )
+			hwctl |= 0x1;
+		else
+			hwctl &= ~0x1;
+		if ( ctrl & NAND_ALE )
+			hwctl |= 0x2;
+		else
+			hwctl &= ~0x2;
+		if ( (ctrl & NAND_NCE) != NAND_NCE)
+			writeb(0x00, &(alpr_ndfc->term));
+	}
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
 }
 
 static u_char alpr_nand_read_byte(struct mtd_info *mtd)
@@ -158,12 +139,10 @@ int board_nand_init(struct nand_chip *nand)
 {
 	alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
 
-	nand->eccmode = NAND_ECC_SOFT;
+	nand->ecc.mode = NAND_ECC_SOFT;
 
 	/* Reference hardware control function */
-	nand->hwcontrol  = alpr_nand_hwcontrol;
-	/* Set command delay time */
-	nand->write_byte = alpr_nand_write_byte;
+	nand->cmd_ctrl  = alpr_nand_hwcontrol;
 	nand->read_byte  = alpr_nand_read_byte;
 	nand->write_buf  = alpr_nand_write_buf;
 	nand->read_buf   = alpr_nand_read_buf;
diff --git a/board/prodrive/pdnb3/flash.c b/board/prodrive/pdnb3/flash.c
index 518ea9c..0786324 100644
--- a/board/prodrive/pdnb3/flash.c
+++ b/board/prodrive/pdnb3/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <asm/arch/ixp425.h>
 
-#if !defined(CFG_FLASH_CFI_DRIVER)
+#if !defined(CONFIG_FLASH_CFI_DRIVER)
 
 /*
  * include common flash code (for esd boards)
@@ -86,4 +86,4 @@ unsigned long flash_init(void)
 	return size;
 }
 
-#endif /* CFG_FLASH_CFI_DRIVER */
+#endif /* CONFIG_FLASH_CFI_DRIVER */
diff --git a/board/prodrive/pdnb3/nand.c b/board/prodrive/pdnb3/nand.c
index b1e7041..1ce3c8c 100644
--- a/board/prodrive/pdnb3/nand.c
+++ b/board/prodrive/pdnb3/nand.c
@@ -52,40 +52,26 @@ static struct pdnb3_ndfc_regs *pdnb3_ndfc;
  *
  * There is one NAND devices on the board, a Hynix HY27US08561A (32 MByte).
  */
-static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	switch (cmd) {
-	case NAND_CTL_SETCLE:
-		hwctl |= 0x1;
-		break;
-	case NAND_CTL_CLRCLE:
-		hwctl &= ~0x1;
-		break;
-
-	case NAND_CTL_SETALE:
-		hwctl |= 0x2;
-		break;
-	case NAND_CTL_CLRALE:
-		hwctl &= ~0x2;
-		break;
-
-	case NAND_CTL_SETNCE:
-		break;
-	case NAND_CTL_CLRNCE:
-		writeb(0x00, &(pdnb3_ndfc->term));
-		break;
+	struct nand_chip *this = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if ( ctrl & NAND_CLE )
+			hwctl |= 0x1;
+		else
+			hwctl &= ~0x1;
+		if ( ctrl & NAND_ALE )
+			hwctl |= 0x2;
+		else
+			hwctl &= ~0x2;
+		if ( (ctrl & NAND_NCE) != NAND_NCE)
+			writeb(0x00, &(pdnb3_ndfc->term));
 	}
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
 }
 
-static void pdnb3_nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
-	if (hwctl & 0x1)
-		writeb(byte, &(pdnb3_ndfc->cmd));
-	else if (hwctl & 0x2)
-		writeb(byte, &(pdnb3_ndfc->addr));
-	else
-		writeb(byte, &(pdnb3_ndfc->data));
-}
 
 static u_char pdnb3_nand_read_byte(struct mtd_info *mtd)
 {
@@ -152,16 +138,13 @@ int board_nand_init(struct nand_chip *nand)
 {
 	pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CFG_NAND_BASE;
 
-	nand->eccmode = NAND_ECC_SOFT;
+	nand->ecc.mode = NAND_ECC_SOFT;
 
 	/* Set address of NAND IO lines (Using Linear Data Access Region) */
 	nand->IO_ADDR_R = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
 	nand->IO_ADDR_W = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
 	/* Reference hardware control function */
-	nand->hwcontrol  = pdnb3_nand_hwcontrol;
-	/* Set command delay time */
-	nand->hwcontrol  = pdnb3_nand_hwcontrol;
-	nand->write_byte = pdnb3_nand_write_byte;
+	nand->cmd_ctrl   = pdnb3_nand_hwcontrol;
 	nand->read_byte  = pdnb3_nand_read_byte;
 	nand->write_buf  = pdnb3_nand_write_buf;
 	nand->read_buf   = pdnb3_nand_read_buf;