board: delete meaningless serial.h

Delete some serial.h files, whole code in which is surrounded by
  #if 0 ... #endif

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Stefan Roese <sr@denx.de>

1 files changed, 0 insertions, 73 deletions

diff --git a/board/prodrive/p3mx/serial.h b/board/prodrive/p3mx/serial.h
deleted file mode 100644
index 264e2d2..0000000
--- a/board/prodrive/p3mx/serial.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * modified for marvell db64360 eval board by
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* serial.h - mostly useful for DUART serial_init in serial.c */
-
-#ifndef __SERIAL_H__
-#define __SERIAL_H__
-
-#if 0
-
-#define B230400         1
-#define B115200         2
-#define B57600          4
-#define B38400          82
-#define B19200          163
-#define B9600           24
-#define B4800           651
-#define B2400           1302
-#define B1200           2604
-#define B600            5208
-#define B300            10417
-#define B150            20833
-#define B110            28409
-#define BDEFAULT        B115200
-
-				/* this stuff is important to initialize
-				the DUART channels */
-
-#define	Scale		0x01L		/* distance between port addresses */
-#define	COM1		0x000003f8		/* Keyboard */
-#define COM2		0x000002f8		/* Host */
-
-
-/* Port Definitions relative to base COM port addresses */
-#define DataIn	(0x00*Scale)	/* data input port */
-#define DataOut	(0x00*Scale)	/* data output port */
-#define BaudLsb	(0x00*Scale)	/* baud rate divisor least significant byte */
-#define BaudMsb	(0x01*Scale)	/* baud rate divisor most significant byte */
-#define	Ier	(0x01*Scale)	/* interrupt enable register */
-#define	Iir	(0x02*Scale)	/* interrupt identification register */
-#define	Lcr	(0x03*Scale)	/* line control register */
-#define	Mcr	(0x04*Scale)	/* modem control register */
-#define	Lsr	(0x05*Scale)	/* line status register */
-#define	Msr	(0x06*Scale)	/* modem status register */
-
-/* Bit Definitions for above ports */
-#define LcrDlab	0x80	/* b7:	 enable baud rate divisor registers */
-#define	LcrDflt	0x03	/* b6-0: no parity, 1 stop, 8 data */
-
-#define	McrRts	0x02	/* b1:	request to send (I am ready to xmit) */
-#define	McrDtr	0x01	/* b0:	data terminal ready (I am alive ready to rcv) */
-#define	McrDflt	(McrRts|McrDtr)
-
-#define LsrTxD	0x6000	/* b5: transmit holding register empty (i.e. xmit OK!)*/
-			/* b6: transmitter empty */
-#define LsrRxD	0x0100	/* b0: received data ready (i.e. got a byte!) */
-
-#define	MsrRi	0x0040	/* b6: ring indicator (other guy is ready to rcv) */
-#define	MsrDsr	0x0020	/* b5: data set ready (other guy is alive ready to rcv */
-#define	MsrCts	0x0010	/* b4: clear to send (other guy is ready to rcv) */
-
-#define IerRda	0xf	/* b0: Enable received data available interrupt */
-
-#endif
-
-#endif /* __SERIAL_H__ */