* Update Intel IXP4xx support

- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006

[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
 sufferes from licensing issues. Blame Intel.]

1 files changed, 183 insertions, 0 deletions

diff --git a/board/prodrive/common/fpga.c b/board/prodrive/common/fpga.c
new file mode 100644
index 0000000..f9412a2
--- /dev/null
+++ b/board/prodrive/common/fpga.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2001-2004
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef FPGA_DEBUG
+#define DBG(x...) printf(x)
+#else
+#define DBG(x...)
+#endif /* DEBUG */
+
+#define FPGA_PRG		CFG_FPGA_PRG /* FPGA program pin (cpu output)*/
+#define FPGA_CLK		CFG_FPGA_CLK /* FPGA clk pin (cpu output)    */
+#define FPGA_DATA		CFG_FPGA_DATA /* FPGA data pin (cpu output)  */
+#define FPGA_DONE		CFG_FPGA_DONE /* FPGA done pin (cpu input)   */
+#define FPGA_INIT		CFG_FPGA_INIT /* FPGA init pin (cpu input)   */
+
+#define ERROR_FPGA_PRG_INIT_LOW  -1        /* Timeout after PRG* asserted   */
+#define ERROR_FPGA_PRG_INIT_HIGH -2        /* Timeout after PRG* deasserted */
+#define ERROR_FPGA_PRG_DONE      -3        /* Timeout after programming     */
+
+#ifndef OLD_VAL
+# define OLD_VAL		0
+#endif
+
+#if 0 /* test-only */
+#define FPGA_WRITE_1 { \
+		SET_FPGA(OLD_VAL | FPGA_PRG | 0        | FPGA_DATA);  /* set clock to 0 */ \
+		SET_FPGA(OLD_VAL | FPGA_PRG | 0        | FPGA_DATA);  /* set data to 1  */	\
+		SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */	\
+		SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+
+#define FPGA_WRITE_0 { \
+		SET_FPGA(OLD_VAL | FPGA_PRG | 0        | FPGA_DATA);  /* set clock to 0 */	\
+		SET_FPGA(OLD_VAL | FPGA_PRG | 0        | 0        );  /* set data to 0  */	\
+		SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | 0        );  /* set clock to 1 */	\
+		SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+#else
+#define FPGA_WRITE_1 { \
+		SET_FPGA(OLD_VAL | FPGA_PRG | 0        | FPGA_DATA);  /* set data to 1  */	\
+		SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+
+#define FPGA_WRITE_0 { \
+		SET_FPGA(OLD_VAL | FPGA_PRG | 0        | 0        );   /* set data to 0  */	\
+		SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | 0        );}  /* set data to 1  */
+#endif
+
+static int fpga_boot(unsigned char *fpgadata, int size)
+{
+	int i,index,len;
+	int count;
+	int j;
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = fpgadata[index];
+		DBG("FPGA: %s\n", &(fpgadata[index+1]));
+		index += len+3;
+	}
+
+	/* search for preamble 0xFFFFFFFF */
+	while (1) {
+		if ((fpgadata[index] == 0xff) && (fpgadata[index+1] == 0xff) &&
+		    (fpgadata[index+2] == 0xff) && (fpgadata[index+3] == 0xff))
+			break; /* preamble found */
+		else
+			index++;
+	}
+
+	DBG("FPGA: configdata starts at position 0x%x\n",index);
+	DBG("FPGA: length of fpga-data %d\n", size-index);
+
+	/*
+	 * Setup port pins for fpga programming
+	 */
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);            /* set pins to high */
+
+	DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
+	DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
+
+	/*
+	 * Init fpga by asserting and deasserting PROGRAM*
+	 */
+	SET_FPGA(0 | FPGA_CLK | FPGA_DATA);             /* set prog active */
+
+	/* Wait for FPGA init line low */
+	count = 0;
+	while (FPGA_INIT_STATE) {
+		udelay(1000); /* wait 1ms */
+		/* Check for timeout - 100us max, so use 3ms */
+		if (count++ > 3) {
+			DBG("FPGA: Booting failed!\n");
+			return ERROR_FPGA_PRG_INIT_LOW;
+		}
+	}
+
+	DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
+	DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
+
+	/* deassert PROGRAM* */
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);           /* set prog inactive */
+
+	/* Wait for FPGA end of init period .  */
+	count = 0;
+	while (!(FPGA_INIT_STATE)) {
+		udelay(1000); /* wait 1ms */
+		/* Check for timeout */
+		if (count++ > 3) {
+			DBG("FPGA: Booting failed!\n");
+			return ERROR_FPGA_PRG_INIT_HIGH;
+		}
+	}
+
+	DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
+	DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
+
+	DBG("write configuration data into fpga\n");
+	/* write configuration-data into fpga... */
+
+	/*
+	 * Load uncompressed image into fpga
+	 */
+	for (i=index; i<size; i++) {
+		for (j=0; j<8; j++) {
+			if ((fpgadata[i] & 0x80) == 0x80) {
+				FPGA_WRITE_1;
+			} else {
+				FPGA_WRITE_0;
+			}
+			fpgadata[i] <<= 1;
+		}
+	}
+
+	DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
+	DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
+
+	/*
+	 * Check if fpga's DONE signal - correctly booted ?
+	 */
+
+	/* Wait for FPGA end of programming period .  */
+	count = 0;
+	while (!(FPGA_DONE_STATE)) {
+		udelay(1000); /* wait 1ms */
+		/* Check for timeout */
+		if (count++ > 3) {
+			DBG("FPGA: Booting failed!\n");
+			return ERROR_FPGA_PRG_DONE;
+		}
+	}
+
+	DBG("FPGA: Booting successful!\n");
+	return 0;
+}