MPC824x: remove obsolete "PN62" board

The MPC824x processors have long reached EOL, and the PN62 board has
not seen any board-specific updates for more than a decade.  It is now
causing build issues.  Instead of wasting time on things nobody is
interested in any more, we rather drop this board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
cc: Tom Rini <trini@ti.com>

1 files changed, 0 insertions, 145 deletions

diff --git a/board/pn62/pn62.h b/board/pn62/pn62.h
deleted file mode 100644
index 10290c3..0000000
--- a/board/pn62/pn62.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _PN62_H_
-#define _PN62_H_
-
-/*
- * Definitions for the Intel Bridge 21554 or 21555.
- */
-#define I2155X_VPD_ADDR		0xe6
-#define I2155X_VPD_DATA		0xe8
-
-#define I2155X_VPD_START	0x80
-#define I2155X_VPD_SN_START	0x80
-#define I2155X_VPD_SN_SIZE	0x10
-#define I2155X_VPD_MAC0_START	0x90
-#define I2155X_VPD_MAC1_START	0x96
-
-#define I2155X_SCRAPAD_ADDR	0xa8
-#define I2155X_SCRAPAD_MAX	8
-
-#define I2155X_BAR2_BASE	0x98
-#define I2155X_BAR3_BASE	0x9c
-#define I2155X_BAR4_BASE	0xa0
-
-#define I2155X_BAR2_SETUP	0xb0
-#define I2155X_BAR3_SETUP	0xb4
-#define I2155X_BAR4_SETUP	0xb8
-
-/*
- * Interrupt request numbers
- */
-#define PN62_IRQ_HOST		0x0
-#define PN62_IRQ_PLX9054	0x1
-#define PN62_IRQ_ETH0		0x2
-#define PN62_IRQ_ETH1		0x3
-#define PN62_IRQ_COM1		0x4
-#define PN62_IRQ_COM2		0x4
-
-/*
- * Miscellaneous definitons.
- */
-#define PN62_SMEM_DEFAULT	0x1f00000
-
-/*
- * Definitions for boot protocol using Scratchpad registers.
- */
-#define BOOT_DONE		0
-#define BOOT_DONE_CLEAR		0x00dead00
-#define BOOT_DONE_ERROR		0xbad0dead
-#define BOOT_DONE_U_BOOT	0x12345678
-#define BOOT_DONE_LINUX		0x87654321
-#define BOOT_CMD		1
-#define BOOT_CMD_MOVE		0x1
-#define BOOT_CMD_BOOT		0x2
-#define BOOT_DATA		2
-#define BOOT_PROTO		3
-#define BOOT_PROTO_READY	0x23456789
-#define BOOT_PROTO_CLEAR	0x00000000
-#define BOOT_STATUS		4
-
-/*
- * LED Definitions:
- */
-#define PN62_LED_BASE		0xff800300
-#define PN62_LED_MAX		12
-
-/*
- * LED0 - 7 mounted on top of board, D1 - D8
- * LED8 - 11 upper four LEDs on the front panel of the board.
- */
-#define LED_0			0x00	/* OFF */
-#define LED_1			0x01	/* ON */
-#define LED_SLOW_CLOCK		0x02	/* SLOW 1Hz ish */
-#define LED_nSLOW_CLOCK		0x03	/* inverse of above */
-#define LED_WATCHDOG_OUT	0x06	/* Reset Watchdog level */
-#define LED_WATCHDOG_CLOCK	0x07	/* clock to watchdog */
-
-/*
- * LED's currently setup in AMD79C973 device as the following:
- * LED0 100Mbit
- * LED1 LNKSE
- * LED2 TX Activity
- * LED3 RX Activity
- */
-#define LED_E0_LED0		0x08	/* Ethernet Port 0 LED 0 */
-#define LED_E0_LED1		0x09	/* Ethernet Port 0 LED 1 */
-#define LED_E0_LED2		0x0A	/* Ethernet Port 0 LED 2 */
-#define LED_E0_LED3		0x0B	/* Ethernet Port 0 LED 3 */
-#define LED_E1_LED0		0x0C	/* Ethernet Port 1 LED 0 */
-#define LED_E1_LED1		0x0D	/* Ethernet Port 1 LED 1 */
-#define LED_E1_LED2		0x0E	/* Ethernet Port 1 LED 2 */
-#define LED_E1_LED3		0x0F	/* Ethernet Port 1 LED 3 */
-#define LED_STROBE0		0x10	/* Processor Strobe 0 */
-#define LED_STROBE1		0x11	/* Processor Strobe 1 */
-#define LED_STROBE2		0x12	/* Processor Strobe 2 */
-#define LED_STROBE3		0x13	/* Processor Strobe 3 */
-#define LED_STROBE4		0x14	/* Processor Strobe 4 */
-#define LED_STROBE5		0x15	/* Processor Strobe 5 */
-#define LED_STROBE6		0x16	/* Processor Strobe 6 */
-#define LED_STROBE7		0x17	/* Processor Strobe 7 */
-#define LED_HOST_STROBE0	0x18	/* Host strobe 0 */
-#define LED_HOST_STROBE1	0x19	/* Host strobe 1 */
-#define LED_HOST_STROBE2	0x1A	/* Host strobe 2 */
-#define LED_HOST_STROBE3	0x1B	/* Host strobe 3 */
-#define LED_HOST_STROBE4	0x1C	/* Host strobe 4 */
-#define LED_HOST_STROBE5	0x1D	/* Host strobe 5 */
-#define LED_HOST_STROBE6	0x1E	/* Host strobe 6 */
-#define LED_HOST_STROBE7	0x1F	/* Host strobe 7 */
-#define LED_MPC_INT0		0x20	/* MPC8240 INT 0 */
-#define LED_MPC_INT1		0x21	/* MPC8240 INT 1 */
-#define	LED_MPC_INT2		0x22	/* MPC8240 INT 2 */
-#define	LED_MPC_INT3		0x23	/* MPC8240 INT 3 */
-#define	LED_MPC_INT4		0x24	/* MPC8240 INT 4 */
-#define	LED_UART0_CS		0x25	/* UART 0 Chip Select */
-#define	LED_UART1_CS		0x26	/* UART 1 Chip Select */
-#define	LED_SRAM_CS		0x27	/* SRAM Chip Select */
-#define	LED_SRAM_WR		0x28	/* SRAM WR Signal */
-#define	LED_SRAM_RD		0x29	/* SRAM RD Signal */
-#define	LED_MPC_RCS0		0x2A	/* MPC8240 RCS0 Signal */
-#define	LED_S_PCI_FRAME		0x2B	/* Secondary PCI Frame Signal */
-#define	LED_MPC_CS0		0x2C	/* MPC8240 CS0 Signal */
-#define	LED_HOST_INT		0x2D	/* MPC8240 to Host Interrupt signal */
-#define LED_LAST_FUNCTION	LED_HOST_INT	/* last function */
-
-/*
- * Forward declarations
- */
-int  i2155x_init	 (void);
-void i2155x_write_scrapad(int idx, u32 val);
-u32  i2155x_read_scrapad (int idx);
-void i2155x_set_bar_base (int bar, u32 addr);
-int  i2155x_read_vpd	 (int offset, int size, unsigned char *data);
-
-int  am79c95x_init	 (void);
-
-void set_led		 (unsigned int number, unsigned int function);
-void fatal_error	 (unsigned int error_code);
-void show_startup_phase  (int phase);
-
-
-#endif /* _PN62_H_ */