diff options
| author | Lars Poeschel <poeschel@lemonage.de> | 2013-11-19 11:22:18 +0100 |
|---|---|---|
| committer | Tom Rini <trini@ti.com> | 2013-12-04 08:11:28 -0500 |
| commit | 7aecdb07a553f07277d28594d60af3c3220bb262 (patch) | |
| tree | 50ef06b2e13d71a7a842767615b71fc1cd37552e /board/phytec | |
| parent | ef62df80dd6d4d1876b55f61ecc03b50de63eb71 (diff) | |
| download | u-boot-imx-7aecdb07a553f07277d28594d60af3c3220bb262.zip u-boot-imx-7aecdb07a553f07277d28594d60af3c3220bb262.tar.gz u-boot-imx-7aecdb07a553f07277d28594d60af3c3220bb262.tar.bz2 | |
pcm051: Support for revision 3
Phytec sells revision or version 3 of pcm051. It is labeled 1358.3 on
the board. The difference for u-boot is that is has other DDR3 RAM on it:
1 x MT41K256M16HA125E instead of 2 x MT41J256M8HX15E on revisions 1 and
2. Both configurations are 512 MiB.
Configure your u-boot build with pcm051_rev3 for the new RAM and
pcm051_rev1 for the old RAM configuration. Board revision 2 has to use
pcm051_rev1 also.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Diffstat (limited to 'board/phytec')
| -rw-r--r-- | board/phytec/pcm051/board.c | 53 |
1 files changed, 47 insertions, 6 deletions
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index dafb1eb..bd1bb70 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -49,6 +49,7 @@ const struct dpll_params *get_dpll_ddr_params(void) return &dpll_ddr; } +#ifdef CONFIG_REV1 static const struct ddr_data ddr3_data = { .datardsratio0 = MT41J256M8HX15E_RD_DQS, .datawdsratio0 = MT41J256M8HX15E_WR_DQS, @@ -82,6 +83,52 @@ static struct emif_regs ddr3_emif_reg_data = { PHY_EN_DYN_PWRDN, }; +void sdram_init(void) +{ + config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); +} +#else +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41K256M16HA125E_RD_DQS, + .datawdsratio0 = MT41K256M16HA125E_WR_DQS, + .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, + .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41K256M16HA125E_RATIO, + .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, + .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd1csratio = MT41K256M16HA125E_RATIO, + .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, + .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd2csratio = MT41K256M16HA125E_RATIO, + .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, + .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, + .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, + .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, + .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, + .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, + .zq_config = MT41K256M16HA125E_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY | + PHY_EN_DYN_PWRDN, +}; + +void sdram_init(void) +{ + config_ddr(DDR_CLK_MHZ, MT41K256M16HA125E_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); +} +#endif + void set_uart_mux_conf(void) { enable_uart0_pin_mux(); @@ -95,12 +142,6 @@ void set_mux_conf_regs(void) enable_board_pin_mux(); } - -void sdram_init(void) -{ - config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); -} #endif /* |