summaryrefslogtreecommitdiff
path: root/board/phytec/pcm051
diff options
context:
space:
mode:
authorLars Poeschel <poeschel@lemonage.de>2013-11-19 11:22:18 +0100
committerTom Rini <trini@ti.com>2013-12-04 08:11:28 -0500
commit7aecdb07a553f07277d28594d60af3c3220bb262 (patch)
tree50ef06b2e13d71a7a842767615b71fc1cd37552e /board/phytec/pcm051
parentef62df80dd6d4d1876b55f61ecc03b50de63eb71 (diff)
downloadu-boot-imx-7aecdb07a553f07277d28594d60af3c3220bb262.zip
u-boot-imx-7aecdb07a553f07277d28594d60af3c3220bb262.tar.gz
u-boot-imx-7aecdb07a553f07277d28594d60af3c3220bb262.tar.bz2
pcm051: Support for revision 3
Phytec sells revision or version 3 of pcm051. It is labeled 1358.3 on the board. The difference for u-boot is that is has other DDR3 RAM on it: 1 x MT41K256M16HA125E instead of 2 x MT41J256M8HX15E on revisions 1 and 2. Both configurations are 512 MiB. Configure your u-boot build with pcm051_rev3 for the new RAM and pcm051_rev1 for the old RAM configuration. Board revision 2 has to use pcm051_rev1 also. Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Diffstat (limited to 'board/phytec/pcm051')
-rw-r--r--board/phytec/pcm051/board.c53
1 files changed, 47 insertions, 6 deletions
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index dafb1eb..bd1bb70 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -49,6 +49,7 @@ const struct dpll_params *get_dpll_ddr_params(void)
return &dpll_ddr;
}
+#ifdef CONFIG_REV1
static const struct ddr_data ddr3_data = {
.datardsratio0 = MT41J256M8HX15E_RD_DQS,
.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
@@ -82,6 +83,52 @@ static struct emif_regs ddr3_emif_reg_data = {
PHY_EN_DYN_PWRDN,
};
+void sdram_init(void)
+{
+ config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#else
+static const struct ddr_data ddr3_data = {
+ .datardsratio0 = MT41K256M16HA125E_RD_DQS,
+ .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+ .datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+ .cmd0csratio = MT41K256M16HA125E_RATIO,
+ .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
+ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd1csratio = MT41K256M16HA125E_RATIO,
+ .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
+ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd2csratio = MT41K256M16HA125E_RATIO,
+ .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
+ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+ .zq_config = MT41K256M16HA125E_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY |
+ PHY_EN_DYN_PWRDN,
+};
+
+void sdram_init(void)
+{
+ config_ddr(DDR_CLK_MHZ, MT41K256M16HA125E_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#endif
+
void set_uart_mux_conf(void)
{
enable_uart0_pin_mux();
@@ -95,12 +142,6 @@ void set_mux_conf_regs(void)
enable_board_pin_mux();
}
-
-void sdram_init(void)
-{
- config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
- &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-}
#endif
/*