summaryrefslogtreecommitdiff
path: root/board/overo
diff options
context:
space:
mode:
authorSteve Sakoman <steve@sakoman.com>2010-08-24 10:37:29 -0700
committerSandeep Paulraj <s-paulraj@ti.com>2010-09-08 14:51:45 -0400
commita06e1629f4f53db7d1b9fefec6dfabf6438b2d55 (patch)
treea9ab34d972c4356ee58d96a7ea98646e3e68b7d2 /board/overo
parent08cbba2abf2d581d2431c982d21be1cbf055da78 (diff)
downloadu-boot-imx-a06e1629f4f53db7d1b9fefec6dfabf6438b2d55.zip
u-boot-imx-a06e1629f4f53db7d1b9fefec6dfabf6438b2d55.tar.gz
u-boot-imx-a06e1629f4f53db7d1b9fefec6dfabf6438b2d55.tar.bz2
ARMV7: OMAP: Overo: Autodetect presence/absence of transceiver on mmc2
An upcoming version of Overo uses a Wifi/BT module with 1.8V signaling, eliminating the need for an external transceiver to handle the level shifting. This patch detects whether an external transceiver is present and adjusts the pinmux settings as appropriate. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Diffstat (limited to 'board/overo')
-rw-r--r--board/overo/overo.c47
-rw-r--r--board/overo/overo.h35
2 files changed, 80 insertions, 2 deletions
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 4a60917..1b67f1f 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -103,6 +103,39 @@ int get_board_revision(void)
}
/*
+ * Routine: get_sdio2_config
+ * Description: Return information about the wifi module connection
+ * Returns 0 if the module connects though a level translator
+ * Returns 1 if the module connects directly
+ */
+int get_sdio2_config(void)
+{
+ int sdio_direct;
+
+ if (!omap_request_gpio(130) && !omap_request_gpio(139)) {
+
+ omap_set_gpio_direction(130, 0);
+ omap_set_gpio_direction(139, 1);
+
+ sdio_direct = 1;
+ omap_set_gpio_dataout(130, 0);
+ if (omap_get_gpio_datain(139) == 0) {
+ omap_set_gpio_dataout(130, 1);
+ if (omap_get_gpio_datain(139) == 1)
+ sdio_direct = 0;
+ }
+
+ omap_free_gpio(130);
+ omap_free_gpio(139);
+ } else {
+ printf("Error: unable to acquire sdio2 clk GPIOs\n");
+ sdio_direct = -1;
+ }
+
+ return sdio_direct;
+}
+
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
*/
@@ -116,6 +149,20 @@ int misc_init_r(void)
#endif
printf("Board revision: %d\n", get_board_revision());
+
+ switch (get_sdio2_config()) {
+ case 0:
+ printf("Tranceiver detected on mmc2\n");
+ MUX_OVERO_SDIO2_TRANSCEIVER();
+ break;
+ case 1:
+ printf("Direct connection on mmc2\n");
+ MUX_OVERO_SDIO2_DIRECT();
+ break;
+ default:
+ printf("Unable to detect mmc2 connection type\n");
+ }
+
dieid_num_r();
return 0;
diff --git a/board/overo/overo.h b/board/overo/overo.h
index 2744ffe..33a92e4 100644
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -211,7 +211,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\
MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\
/*Wireless LAN */\
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
@@ -220,7 +220,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
/*Bluetooth*/\
MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\
MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
@@ -387,5 +387,36 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
+#define MUX_OVERO_SDIO2_DIRECT() \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M0)) /*MMC2_DAT4*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M0)) /*MMC2_DAT5*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M0)) /*MMC2_DAT6*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)) /*MMC2_DAT7*/\
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | EN | M4)) /*GPIO_126*/\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/
+
+#define MUX_OVERO_SDIO2_TRANSCEIVER() \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) /*GPIO_126*/\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/
#endif