summaryrefslogtreecommitdiff
path: root/board/overo
diff options
context:
space:
mode:
authorPeter Barada <peter.barada@logicpd.com>2012-11-13 07:40:28 +0000
committerTom Rini <trini@ti.com>2012-12-10 08:54:02 -0700
commit8c4445d26633f43fcd04add3d6cdc3bc41d14841 (patch)
treee2cab89ccff5955681182e71200a8d1053585528 /board/overo
parentd7aff44a00e5de3de2ed18a3329edf5ff9d3aada (diff)
downloadu-boot-imx-8c4445d26633f43fcd04add3d6cdc3bc41d14841.zip
u-boot-imx-8c4445d26633f43fcd04add3d6cdc3bc41d14841.tar.gz
u-boot-imx-8c4445d26633f43fcd04add3d6cdc3bc41d14841.tar.bz2
Pass sdrc timing values through board_sdrc_timings structure
Instead of passing individual registers by value to board_get_mem_timings, pass a board_mem_timings structure pointer for the board files to fill in. Pass same structure pointer to write_sdrc_timings. This saves about 90 bytes of space in SPL. Signed-off-by: Peter Barada <peter.barada@logicpd.com>
Diffstat (limited to 'board/overo')
-rw-r--r--board/overo/overo.c37
1 files changed, 18 insertions, 19 deletions
diff --git a/board/overo/overo.c b/board/overo/overo.c
index c6d50a0..fdf46a2 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -147,34 +147,33 @@ int get_board_revision(void)
* Description: If we use SPL then there is no x-loader nor config header
* so we have to setup the DDR timings ourself on both banks.
*/
-void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
- u32 *mr)
+void get_board_mem_timings(struct board_sdrc_timings *timings)
{
- *mr = MICRON_V_MR_165;
+ timings->mr = MICRON_V_MR_165;
switch (get_board_revision()) {
case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */
- *mcfg = MICRON_V_MCFG_165(128 << 20);
- *ctrla = MICRON_V_ACTIMA_165;
- *ctrlb = MICRON_V_ACTIMB_165;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ timings->mcfg = MICRON_V_MCFG_165(128 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_165;
+ timings->ctrlb = MICRON_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
break;
case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */
- *mcfg = MICRON_V_MCFG_165(256 << 20);
- *ctrla = MICRON_V_ACTIMA_165;
- *ctrlb = MICRON_V_ACTIMB_165;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ timings->mcfg = MICRON_V_MCFG_165(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_165;
+ timings->ctrlb = MICRON_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
break;
case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */
- *mcfg = HYNIX_V_MCFG_165(256 << 20);
- *ctrla = HYNIX_V_ACTIMA_165;
- *ctrlb = HYNIX_V_ACTIMB_165;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ timings->mcfg = HYNIX_V_MCFG_165(256 << 20);
+ timings->ctrla = HYNIX_V_ACTIMA_165;
+ timings->ctrlb = HYNIX_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
break;
default:
- *mcfg = MICRON_V_MCFG_165(128 << 20);
- *ctrla = MICRON_V_ACTIMA_165;
- *ctrlb = MICRON_V_ACTIMB_165;
- *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ timings->mcfg = MICRON_V_MCFG_165(128 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_165;
+ timings->ctrlb = MICRON_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
}
}
#endif