Coding Style cleanup: replace leading SPACEs by TABs

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>

1 files changed, 61 insertions, 61 deletions

diff --git a/board/openrisc/openrisc-generic/or1ksim.cfg b/board/openrisc/openrisc-generic/or1ksim.cfg
index 9926093..2bd8642 100644
--- a/board/openrisc/openrisc-generic/or1ksim.cfg
+++ b/board/openrisc/openrisc-generic/or1ksim.cfg
@@ -20,8 +20,8 @@ the simulator.
    not found too, it reverts to the built-in default configuration.
 
    NOTE: Users should not rely on the built-in configuration, since the
-         default configuration may differ between version.
-         Rather create a configuration file that sets all critical values.
+	 default configuration may differ between version.
+	 Rather create a configuration file that sets all critical values.
 
    This file may contain (standard C) comments only - no // support.
 
@@ -306,7 +306,7 @@ end
   debug = 0-9
       0  : no debug messages
       1-9: debug message level.
-           higher numbers produce more messages
+	   higher numbers produce more messages
 
   profile = 0/1
       '0': don't generate profiling file 'sim.profile'
@@ -375,11 +375,11 @@ end
     Core Verification.
 
     enabled = 0/1
-        '0': disbable VAPI server
-        '1': enable/start VAPI server
+	'0': disbable VAPI server
+	'1': enable/start VAPI server
 
     server_port = <value>
-        TCP/IP port to start VAPI server on
+	TCP/IP port to start VAPI server on
 
     log_enabled = 0/1
        '0': disable VAPI requests logging
@@ -565,56 +565,56 @@ end
    This section configures the UARTs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first UART register for this device
+	address of first UART register for this device
 
 
      channel = <channeltype>:<args>
 
-        The channel parameter indicates the source of received UART characters
-        and the sink for transmitted UART characters.
+	The channel parameter indicates the source of received UART characters
+	and the sink for transmitted UART characters.
 
-        The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
-        (without quotes).
+	The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
+	(without quotes).
 
-          A) To send/receive characters from a pair of files, use a file
-             channel:
+	  A) To send/receive characters from a pair of files, use a file
+	     channel:
 
-               channel=file:<rxfile>,<txfile>
+	       channel=file:<rxfile>,<txfile>
 
 	  B) To create an interactive terminal window, use an xterm channel:
 
-               channel=xterm:[<xterm_arg>]*
+	       channel=xterm:[<xterm_arg>]*
 
 	  C) To create a bidirectional tcp socket which one could, for example,
-             access via telnet, use a tcp channel:
+	     access via telnet, use a tcp channel:
 
-               channel=tcp:<port number>
+	       channel=tcp:<port number>
 
 	  D) To cause the UART to read/write from existing numeric file
-             descriptors, use an fd channel:
+	     descriptors, use an fd channel:
 
-               channel=fd:<rx file descriptor num>,<tx file descriptor num>
+	       channel=fd:<rx file descriptor num>,<tx file descriptor num>
 
-          E) To connect the UART to a physical serial port, create a tty
-             channel:
+	  E) To connect the UART to a physical serial port, create a tty
+	     channel:
 
 	       channel=tty:device=/dev/ttyS0,baud=9600
 
      irq = <value>
-        irq number for this device
+	irq number for this device
 
      16550 = 0/1
-        '0': this device is a UART16450
-        '1': this device is a UART16550
+	'0': this device is a UART16450
+	'1': this device is a UART16550
 
      jitter = <value>
-        in msecs... time to block, -1 to disable it
+	in msecs... time to block, -1 to disable it
 
      vapi_id = <hex_value>
-        VAPI id of this instance
+	VAPI id of this instance
 */
 
 section uart
@@ -634,16 +634,16 @@ end
    This section configures the DMAs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first DMA register for this device
+	address of first DMA register for this device
 
      irq = <value>
-        irq number for this device
+	irq number for this device
 
      vapi_id = <hex_value>
-        VAPI id of this instance
+	VAPI id of this instance
 */
 
 section dma
@@ -658,37 +658,37 @@ end
    This section configures the ETHERNETs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first ethernet register for this device
+	address of first ethernet register for this device
 
      dma = <value>
-        which controller is this ethernet "connected" to
+	which controller is this ethernet "connected" to
 
      irq = <value>
-        ethernet mac IRQ level
+	ethernet mac IRQ level
 
      rtx_type = <value>
-        use 0 - file interface, 1 - socket interface
+	use 0 - file interface, 1 - socket interface
 
      rx_channel = <value>
-        DMA channel used for RX
+	DMA channel used for RX
 
      tx_channel = <value>
-        DMA channel used for TX
+	DMA channel used for TX
 
      rxfile = "<filename>"
-        filename, where to read data from
+	filename, where to read data from
 
      txfile = "<filename>"
-        filename, where to write data to
+	filename, where to write data to
 
      sockif = "<ifacename>"
-        interface name of ethernet socket
+	interface name of ethernet socket
 
      vapi_id = <hex_value>
-        VAPI id of this instance
+	VAPI id of this instance
 */
 
 section ethernet
@@ -711,16 +711,16 @@ end
    This section configures the GPIOs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first GPIO register for this device
+	address of first GPIO register for this device
 
      irq = <value>
-        irq number for this device
+	irq number for this device
 
      base_vapi_id = <hex_value>
-        first VAPI id of this instance
+	first VAPI id of this instance
 	GPIO uses 8 consecutive VAPI IDs
 */
 
@@ -736,19 +736,19 @@ end
     This section configures the VGA/LCD controller
 
       enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
       baseaddr = <hex_value>
-        address of first VGA register
+	address of first VGA register
 
       irq = <value>
-        irq number for this device
+	irq number for this device
 
       refresh_rate = <value>
-        number of cycles between screen dumps
+	number of cycles between screen dumps
 
       filename = "<filename>"
-        template name for generated names (e.g. "primary" produces "primary0023.bmp")
+	template name for generated names (e.g. "primary" produces "primary0023.bmp")
 */
 
 section vga
@@ -825,39 +825,39 @@ end
     This section configures the ATA/ATAPI host controller
 
       baseaddr = <hex_value>
-        address of first ATA register
+	address of first ATA register
 
       enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
       irq = <value>
-        irq number for this device
+	irq number for this device
 
       debug = <value>
-        debug level for ata models.
+	debug level for ata models.
 	0: no debug messages
 	1: verbose messages
 	3: normal messages (more messages than verbose)
-        5: debug messages (normal debug messages)
+	5: debug messages (normal debug messages)
 	7: flow control messages (debug statemachine flows)
 	9: low priority message (display everything the code does)
 
       dev_type0/1 = <value>
-        ata device 0 type
-        0: NO_CONNeCT: none (not connected)
+	ata device 0 type
+	0: NO_CONNeCT: none (not connected)
 	1: FILE      : simulated harddisk
 	2: LOCAL     : local system harddisk
 
       dev_file0/1 = "<filename>"
-        filename for simulated ATA device
+	filename for simulated ATA device
 	valid only if dev_type0 == 1
 
       dev_size0/1 = <value>
-        size of simulated hard-disk (in MBytes)
+	size of simulated hard-disk (in MBytes)
 	valid only if dev_type0 == 1
 
       dev_packet0/1 = <value>
-        0: simulated ATA device does NOT implement PACKET command feature set
+	0: simulated ATA device does NOT implement PACKET command feature set
 	1: simulated ATA device does implement PACKET command feature set
 
    FIXME: irq number