omap: move TI's boards to board/ti/

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 0 insertions, 395 deletions

diff --git a/board/omap730p2/lowlevel_init.S b/board/omap730p2/lowlevel_init.S
deleted file mode 100644
index d4e97a5..0000000
--- a/board/omap730p2/lowlevel_init.S
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003-2004
- *
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
- *
- * Modified for OMAP730 P2 Board by Dave Peverley, MPC-Data Limited
- * (http://www.mpc-data.co.uk)
- *
- * TODO : Tidy up and change to use system register defines
- *        from omap730.h where possible.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP730)
-#include <./configs/omap730.h>
-#endif
-
-_TEXT_BASE:
-	.word	TEXT_BASE	/* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Save callers address in r11 - r11 must never be modified */
-	mov r11, lr
-
-	/*------------------------------------------------------*
-	 *mask all IRQs by setting all bits in the INTMR default*
-	 *------------------------------------------------------*/
-	mov	r1,	#0xffffffff
-	ldr	r0,	=REG_IHL1_MIR
-	str	r1,	[r0]
-	ldr	r0,	=REG_IHL2_MIR
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT1)                   *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT1
-	ldr	r1,	VAL_ARM_IDLECT1
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT2)		        *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT2
-	ldr	r1,	VAL_ARM_IDLECT2
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT3)		        *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT3
-	ldr	r1,	VAL_ARM_IDLECT3
-	str	r1,	[r0]
-
-
-	mov	r1,	#0x01		/* PER_EN bit */
-	ldr	r0,	REG_ARM_RSTCT2
-	strh	r1,	[r0]		/* CLKM; Peripheral reset. */
-
-	/* Set CLKM to Sync-Scalable	*/
-	/* I supposedly need to enable the dsp clock before switching */
-	mov	r1,	#0x1000
-	ldr	r0,	REG_ARM_SYSST
-	strh	r1,	[r0]
-	mov	r0,	#0x400
-1:
-	subs	r0,	r0,	#0x1	/* wait for any bubbles to finish */
-	bne	1b
-	ldr	r1,	VAL_ARM_CKCTL
-	ldr	r0,	REG_ARM_CKCTL
-	strh	r1,	[r0]
-
-	/* a few nops to let settle */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	/* setup DPLL 1 */
-	/* Ramp up the clock to 96Mhz */
-	ldr	r1,	VAL_DPLL1_CTL
-	ldr	r0,	REG_DPLL1_CTL
-	strh	r1,	[r0]
-	ands	r1,	r1,	#0x10	/* Check if PLL is enabled. */
-	beq	lock_end	/* Do not look for lock if BYPASS selected */
-2:
-	ldrh	r1,	[r0]
-	ands	r1,	r1,	#0x01	/*	Check the LOCK bit.*/
-	beq 2b			/*	loop until bit goes hi. */
-lock_end:
-
-	/*------------------------------------------------------*
-	 * Turn off the watchdog during init...			*
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_WATCHDOG
-	ldr	r1,	WATCHDOG_VAL1
-	str	r1,	[r0]
-	ldr	r1,	WATCHDOG_VAL2
-	str	r1,	[r0]
-	ldr	r0,	REG_WSPRDOG
-	ldr	r1,	WSPRDOG_VAL1
-	str	r1,	[r0]
-	ldr	r0,	REG_WWPSDOG
-
-watch1Wait:
-	ldr	r1,	[r0]
-	tst	r1,	#0x10
-	bne	watch1Wait
-
-	ldr	r0,	REG_WSPRDOG
-	ldr	r1,	WSPRDOG_VAL2
-	str	r1,	[r0]
-	ldr	r0,	REG_WWPSDOG
-watch2Wait:
-	ldr	r1,	[r0]
-	tst	r1,	#0x10
-	bne	watch2Wait
-
-	/* Set memory timings corresponding to the new clock speed */
-
-	/* Check execution location to determine current execution location
-	 * and branch to appropriate initialization code.
-	 */
-	/* Compare physical SDRAM base & current execution location. */
-	and     r0, pc, #0xF0000000
-	/* Compare. */
-	cmp     r0, #0
-	/* Skip over EMIF-fast initialization if running from SDRAM. */
-	bne	skip_sdram
-
-	/*
-	* Delay for SDRAM initialization.
-	*/
-	mov	r3,	#0x1800		/* value should be checked */
-3:
-	subs	r3,	r3,	#0x1	/* Decrement count */
-	bne	3b
-
-	ldr	r0,	REG_SDRAM_CONFIG
-	ldr	r1,	SDRAM_CONFIG_VAL
-	str	r1,	[r0]
-
-	ldr	r0,	REG_SDRAM_MRS_LEGACY
-	ldr	r1,	SDRAM_MRS_VAL
-	str	r1,	[r0]
-
-skip_sdram:
-
-common_tc:
-	/* slow interface */
-	ldr	r1,	VAL_TC_EMIFS_CS0_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS0_CONFIG
-	str	r1,	[r0] /* Chip Select 0 */
-
-	ldr	r1,	VAL_TC_EMIFS_CS1_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS1_CONFIG
-	str	r1,	[r0] /* Chip Select 1 */
-	ldr	r1,	VAL_TC_EMIFS_CS2_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS2_CONFIG
-	str	r1,	[r0] /* Chip Select 2 */
-	ldr	r1,	VAL_TC_EMIFS_CS3_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS3_CONFIG
-	str	r1,	[r0] /* Chip Select 3 */
-
-	/* 48MHz clock request for UART1 */
-	ldr	r1,	PERSEUS2_CONFIG_BASE
-	ldrh	r0,	[r1, #CONFIG_PCC_CONF]
-	orr	r0,	r0, #CONF_MOD_UART1_CLK_MODE_R
-	strh	r0,	[r1, #CONFIG_PCC_CONF]
-
-	/* Initialize public and private rheas
-	 *  - set access factor 2 on both rhea / strobe
-	 *  - disable write buffer on strb0, enable write buffer on strb1
-	 */
-
-	ldr	R0,	REG_RHEA_PUB_CTL
-	ldr	R1,	REG_RHEA_PRIV_CTL
-	ldr	R2,	VAL_RHEA_CTL
-	strh	R2,	[R0]
-	strh	R2,	[R1]
-	mov	R3,	#2          /* disable write buffer on strb0, enable write buffer on strb1 */
-	strh	R3,	[R0, #0x08]	/* arm rhea control reg */
-	strh	R3,	[R1, #0x08]
-
-	/* enable IRQ and FIQ */
-
-	mrs	r4,	CPSR
-	bic	r4,	r4, #IRQ_MASK
-	bic	r4,	r4, #FIQ_MASK
-	msr	CPSR,	r4
-
-	/* set TAP CONF to TRI EMULATION */
-
-	ldr	r1,	[r0, #CONFIG_MODE2]
-	bic	r1,	r1, #0x18
-	orr	r1,	r1, #0x10
-	str	r1,	[r0, #CONFIG_MODE2]
-
-	/* set tdbgen to 1 */
-
-	ldr	r0,	PERSEUS2_CONFIG_BASE
-	ldr	r1,	[r0, #CONFIG_MODE1]
-	mov	r2,	#0x10000
-	orr	r1,	r1, r2
-	str	r1,	[r0, #CONFIG_MODE1]
-
-#ifdef CONFIG_P2_OMAP1610
-	/* inserting additional 2 clock cycle hold time for LAN */
-	ldr     r0,     REG_TC_EMIFS_CS1_ADVANCED
-	ldr	r1,     VAL_TC_EMIFS_CS1_ADVANCED
-	str     r1,     [r0]
-#endif
-	/* Start MPU Timer 1 */
-	ldr	r0,	REG_MPU_LOAD_TIMER
-	ldr	r1,	VAL_MPU_LOAD_TIMER
-	str	r1,	[r0]
-
-	ldr	r0,	REG_MPU_CNTL_TIMER
-	ldr	r1,	VAL_MPU_CNTL_TIMER
-	str	r1,	[r0]
-
-	/* back to arch calling code */
-	mov	pc,	r11
-
-	/* the literal pools origin */
-	.ltorg
-
-REG_TC_EMIFS_CONFIG:		/* 32 bits */
-	.word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
-	.word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
-	.word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
-	.word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
-	.word 0xfffecc1c
-
-#ifdef CONFIG_P2_OMAP730
-REG_TC_EMIFS_CS1_ADVANCED:	/* 32 bits */
-	.word 0xfffecc54
-#endif
-
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL:			/* 16 bits */
-	.word 0xfffece00
-
-REG_ARM_IDLECT3:		/* 16 bits */
-	.word 0xfffece24
-REG_ARM_IDLECT2:		/* 16 bits */
-	.word 0xfffece08
-REG_ARM_IDLECT1:		/* 16 bits */
-	.word 0xfffece04
-
-REG_ARM_RSTCT2:			/* 16 bits */
-	.word 0xfffece14
-REG_ARM_SYSST:			/* 16 bits */
-	.word 0xfffece18
-/* DPLL control registers */
-REG_DPLL1_CTL:			/* 16 bits */
-	.word 0xfffecf00
-
-/* Watch Dog register */
-/* secure watchdog stop */
-REG_WSPRDOG:
-	.word 0xfffeb048
-/* watchdog write pending */
-REG_WWPSDOG:
-	.word 0xfffeb034
-
-WSPRDOG_VAL1:
-	.word 0x0000aaaa
-WSPRDOG_VAL2:
-	.word 0x00005555
-
-/* SDRAM config is: auto refresh enabled, 16 bit 4 bank,
- counter @8192 rows, 10 ns, 8 burst */
-REG_SDRAM_CONFIG:
-	.word 0xfffecc20
-
-REG_SDRAM_MRS_LEGACY:
-	.word 0xfffecc24
-
-REG_WATCHDOG:
-	.word 0xfffec808
-
-REG_MPU_LOAD_TIMER:
-	.word 0xfffec504
-REG_MPU_CNTL_TIMER:
-	.word 0xfffec500
-
-/* Public and private rhea bridge registers definition */
-
-REG_RHEA_PUB_CTL:
-	.word 0xFFFECA00
-
-REG_RHEA_PRIV_CTL:
-	.word 0xFFFED300
-
-/* EMIFF SDRAM Configuration register
-   - self refresh disable
-   - auto refresh enabled
-   - SDRAM type 64 Mb, 16 bits bus 4 banks
-   - power down enabled
-   - SDRAM clock disabled
- */
-SDRAM_CONFIG_VAL:
-	.word 0x0C017DF4
-
-/* Burst full page length ; cas latency = 3 */
-SDRAM_MRS_VAL:
-	.word 0x00000037
-
-VAL_ARM_CKCTL:
-	.word 0x6505
-VAL_DPLL1_CTL:
-	.word 0x3412
-
-#ifdef CONFIG_P2_OMAP730
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x0000FFF3
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x00004278
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0x00004278
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x00004278
-VAL_TC_EMIFS_CS1_ADVANCED:
-	.word 0x00000022
-#endif
-
-VAL_ARM_IDLECT1:
-	.word 0x00000400
-VAL_ARM_IDLECT2:
-	.word 0x00000886
-VAL_ARM_IDLECT3:
-	.word 0x00000015
-
-WATCHDOG_VAL1:
-	.word 0x000000f5
-WATCHDOG_VAL2:
-	.word 0x000000a0
-
-VAL_MPU_LOAD_TIMER:
-	.word 0xffffffff
-VAL_MPU_CNTL_TIMER:
-	.word 0xffffffa1
-
-VAL_RHEA_CTL:
-	.word			0xFF22
-
-/* Config Register vals */
-PERSEUS2_CONFIG_BASE:
-	.word			0xFFFE1000
-
-.equ	CONFIG_PCC_CONF,	0xB4
-.equ	CONFIG_MODE1,		0x10
-.equ	CONFIG_MODE2,		0x14
-.equ	CONF_MOD_UART1_CLK_MODE_R,	0x0A
-
-/* misc values */
-.equ	IRQ_MASK,		0x80           /* IRQ mask value */
-.equ	FIQ_MASK,		0x40           /* FIQ mask value */