Merge branch 'master' of http://www.denx.de/git/u-boot

1 files changed, 110 insertions, 75 deletions

diff --git a/board/omap5912osk/lowlevel_init.S b/board/omap5912osk/lowlevel_init.S
index 3b9633a..a1fa097 100644
--- a/board/omap5912osk/lowlevel_init.S
+++ b/board/omap5912osk/lowlevel_init.S
@@ -41,6 +41,13 @@ _TEXT_BASE:
 .globl lowlevel_init
 lowlevel_init:
 
+	/*------------------------------------------------------*
+	 * Ensure i-cache is enabled                            *
+	 * To configure TC regs without fetching instruction    *
+	 *------------------------------------------------------*/
+	mrc	p15, 0, r0, c1, c0
+	orr	r0, r0, #0x1000
+	mcr	p15, 0, r0, c1, c0
 
 	/*------------------------------------------------------*
 	 *mask all IRQs by setting all bits in the INTMR default*
@@ -59,33 +66,34 @@ lowlevel_init:
 	str	r1,	[r0]
 
 	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT2)  		        *
+	 * Set up ARM CLM registers (IDLECT2)                   *
 	 *------------------------------------------------------*/
 	ldr	r0,	REG_ARM_IDLECT2
 	ldr	r1,	VAL_ARM_IDLECT2
 	str	r1,	[r0]
 
 	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT3)		        *
+	 * Set up ARM CLM registers (IDLECT3)                   *
 	 *------------------------------------------------------*/
 	ldr	r0,	REG_ARM_IDLECT3
 	ldr	r1,	VAL_ARM_IDLECT3
 	str	r1,	[r0]
 
-
-	mov	r1,	#0x01		/* PER_EN bit */
+	mov	r1,	#0x01               /* PER_EN bit */
 	ldr	r0,	REG_ARM_RSTCT2
-	strh	r1,	[r0]		/* CLKM; Peripheral reset. */
+	strh	r1,	[r0]            /* CLKM; Peripheral reset. */
 
-	/* Set CLKM to Sync-Scalable	*/
-	/* I supposedly need to enable the dsp clock before switching */
-	mov	r1,	#0x0000
+	/* Set CLKM to Sync-Scalable */
+	mov	r1,	#0x1000
 	ldr	r0,	REG_ARM_SYSST
-	strh	r1,	[r0]
-	mov	r0,	#0x400
-1:
-	subs	r0,	r0,	#0x1	/* wait for any bubbles to finish */
+
+	mov	r2,	#0
+1:	cmp	r2,	#1
+	streqh	r1,	[r0]
+	add	r2,	r2,	#1
+	cmp	r2,	#0x100              /* wait for any bubbles to finish */
 	bne	1b
+
 	ldr	r1,	VAL_ARM_CKCTL
 	ldr	r0,	REG_ARM_CKCTL
 	strh	r1,	[r0]
@@ -107,17 +115,16 @@ lowlevel_init:
 	ldr	r1,	VAL_DPLL1_CTL
 	ldr	r0,	REG_DPLL1_CTL
 	strh	r1,	[r0]
-	ands	r1,	r1,	#0x10	/* Check if PLL is enabled. */
-	beq	lock_end	/* Do not look for lock if BYPASS selected */
+	ands	r1,	r1,	#0x10       /* Check if PLL is enabled. */
+	beq	lock_end                /* Do not look for lock if BYPASS selected */
 2:
 	ldrh	r1,	[r0]
-	ands	r1,	r1,	#0x01	/*	Check the LOCK bit.*/
-	beq 2b			/*	loop until bit goes hi. */
+	ands	r1,	r1,	#0x01       /* Check the LOCK bit.*/
+	beq 2b                      /* loop until bit goes hi. */
 lock_end:
 
-
 	/*------------------------------------------------------*
-	 * Turn off the watchdog during init...			*
+	 * Turn off the watchdog during init...                 *
  	 *------------------------------------------------------*/
 	ldr	r0,	REG_WATCHDOG
 	ldr	r1,	WATCHDOG_VAL1
@@ -143,30 +150,49 @@ watch2Wait:
 	tst	r1,	#0x10
 	bne	watch2Wait
 
-
 	/* Set memory timings corresponding to the new clock speed */
+	ldr	r3, VAL_SDRAM_CONFIG_SDF0
 
 	/* Check execution location to determine current execution location
 	 * and branch to appropriate initialization code.
 	 */
-	/* Load physical SDRAM base. */
-	mov 	r0, 	#0x10000000
-	/* Get current execution location. */
-	mov 	r1, 	pc
-	/* Compare. */
-	cmp 	r1, 	r0
-	/* Skip over EMIF-fast initialization if running from SDRAM. */
-	bge 	skip_sdram
+	mov	r0,	#0x10000000         /* Load physical SDRAM base. */
+	mov	r1,	pc                  /* Get current execution location. */
+	cmp	r1,	r0                  /* Compare. */
+	bge	skip_sdram              /* Skip over EMIF-fast initialization if running from SDRAM. */
+
+	/* identify the device revision, -- TMX or TMP(TMS) */
+	ldr	r0, REG_DEVICE_ID
+	ldr	r1, [r0]
+
+	ldr	r0, VAL_DEVICE_ID_TMP
+	mov	r1, r1, lsl #15
+	mov	r1, r1, lsr #16
+	cmp	r0, r1
+	bne	skip_TMP_Patch
+
+	/* Enable TMP/TMS device new features */
+	mov	r0, #1
+	ldr	r1, REG_TC_EMIFF_DOUBLER
+	str	r0, [r1]
+
+	/* Enable new ac parameters */
+	mov	r0, #0x0b
+	ldr	r1, REG_SDRAM_CONFIG2
+	str	r0, [r1]
+
+	ldr	r3, VAL_SDRAM_CONFIG_SDF1
+
+skip_TMP_Patch:
 
 	/*
 	* Delay for SDRAM initialization.
 	*/
-	mov	r3,	#0x1800		/* value should be checked */
+	mov	r0,	#0x1800		/* value should be checked */
 3:
-	subs	r3,	r3,	#0x1	/* Decrement count */
+	subs	r0,	r0,	#0x1	/* Decrement count */
 	bne 	3b
 
-
 	/*
 	 * Set SDRAM control values. Disable refresh before MRS command.
 	 */
@@ -178,14 +204,15 @@ watch2Wait:
 
 	/* config register */
 	ldr	r0,	REG_SDRAM_CONFIG
-	ldr	r1,	SDRAM_CONFIG_VAL
-	str	r1,	[r0]
+	str	r3,	[r0]
 
 	/* manual command register */
 	ldr	r0,	REG_SDRAM_MANUAL_CMD
+
 	/* issue set cke high */
 	mov	r1,	#CMD_SDRAM_CKE_SET_HIGH
 	str	r1,	[r0]
+
 	/* issue nop */
 	mov	r1,	#CMD_SDRAM_NOP
 	str	r1,	[r0]
@@ -228,25 +255,23 @@ waitMDDR1:
 	str	r1,	[r0]
 
 	/* delay loop */
-	mov	r2,	#0x0100
+	mov	r0,	#0x0100
 waitMDDR2:
-	subs	r2,	r2,	#1
+	subs	r0,	r0,	#1
 	bne	waitMDDR2
 
 	/*
 	 * Delay for SDRAM initialization.
 	 */
-	mov	r3,	#0x1800
+	mov	r0,	#0x1800
 4:
-	subs	r3,	r3,	#1	/* Decrement count. */
+	subs	r0,	r0,	#1	/* Decrement count. */
 	bne	4b
 	b	common_tc
 
 skip_sdram:
-
 	ldr	r0,	REG_SDRAM_CONFIG
-	ldr	r1,	SDRAM_CONFIG_VAL
-	str	r1,	[r0]
+	str	r3,	[r0]
 
 common_tc:
 	/* slow interface */
@@ -257,10 +282,15 @@ common_tc:
 	ldr	r1,	VAL_TC_EMIFS_CS1_CONFIG
 	ldr	r0,	REG_TC_EMIFS_CS1_CONFIG
 	str	r1,	[r0] /* Chip Select 1 */
+
 	ldr	r1,	VAL_TC_EMIFS_CS3_CONFIG
 	ldr	r0,	REG_TC_EMIFS_CS3_CONFIG
 	str	r1,	[r0] /* Chip Select 3 */
 
+	ldr	r1,	VAL_TC_EMIFS_DWS
+	ldr	r0,	REG_TC_EMIFS_DWS
+	str	r1,	[r0] /* Enable EMIFS.RDY for CS1 (ether) */
+
 #ifdef CONFIG_H2_OMAP1610
 	/* inserting additional 2 clock cycle hold time for LAN */
 	ldr     r0,     REG_TC_EMIFS_CS1_ADVANCED
@@ -282,8 +312,9 @@ common_tc:
 	/* the literal pools origin */
 	.ltorg
 
-
-REG_TC_EMIFS_CONFIG:		/* 32 bits */
+REG_DEVICE_ID:			/* 32 bits */
+	.word 0xfffe2004
+REG_TC_EMIFS_CONFIG:
 	.word 0xfffecc0c
 REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
 	.word 0xfffecc10
@@ -293,7 +324,8 @@ REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
 	.word 0xfffecc18
 REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
 	.word 0xfffecc1c
-
+REG_TC_EMIFS_DWS:		/* 32 bits */
+	.word 0xfffecc40
 #ifdef CONFIG_H2_OMAP1610
 REG_TC_EMIFS_CS1_ADVANCED:	/* 32 bits */
 	.word 0xfffecc54
@@ -302,18 +334,17 @@ REG_TC_EMIFS_CS1_ADVANCED:	/* 32 bits */
 /* MPU clock/reset/power mode control registers */
 REG_ARM_CKCTL:			/* 16 bits */
 	.word 0xfffece00
-
 REG_ARM_IDLECT3:		/* 16 bits */
 	.word 0xfffece24
 REG_ARM_IDLECT2:		/* 16 bits */
 	.word 0xfffece08
 REG_ARM_IDLECT1:		/* 16 bits */
 	.word 0xfffece04
-
 REG_ARM_RSTCT2:			/* 16 bits */
 	.word 0xfffece14
 REG_ARM_SYSST:			/* 16 bits */
 	.word 0xfffece18
+
 /* DPLL control registers */
 REG_DPLL1_CTL:			/* 16 bits */
 	.word 0xfffecf00
@@ -335,6 +366,10 @@ WSPRDOG_VAL2:
  counter @8192 rows, 10 ns, 8 burst */
 REG_SDRAM_CONFIG:
 	.word 0xfffecc20
+REG_SDRAM_CONFIG2:
+	.word 0xfffecc3c
+REG_TC_EMIFF_DOUBLER:		/* 32 bits */
+	.word 0xfffecc60
 
 /* Operation register */
 REG_SDRAM_OPERATION:
@@ -356,35 +391,47 @@ REG_SDRAM_EMRS1:
 REG_DLL_WRT_CONTROL:
 	.word 0xfffecc68
 DLL_WRT_CONTROL_VAL:
-	.word 0x03f00002
+	.word 0x03f00002    /* Phase of 72deg, write offset +31  */
 
 /* URD DLL register */
 REG_DLL_URD_CONTROL:
 	.word 0xfffeccc0
 DLL_URD_CONTROL_VAL:
-	.word 0x00800002
+	.word 0x00800002    /* Phase of 72deg, read offset +31  */
 
 /* LRD DLL register */
 REG_DLL_LRD_CONTROL:
 	.word 0xfffecccc
+DLL_LRD_CONTROL_VAL:
+	.word 0x00800002    /* read offset +31  */
 
 REG_WATCHDOG:
 	.word 0xfffec808
+WATCHDOG_VAL1:
+	.word 0x000000f5
+WATCHDOG_VAL2:
+	.word 0x000000a0
 
 REG_MPU_LOAD_TIMER:
-	.word 0xfffec600
+	.word 0xfffec504
 REG_MPU_CNTL_TIMER:
 	.word 0xfffec500
+VAL_MPU_LOAD_TIMER:
+	.word 0xffffffff
+VAL_MPU_CNTL_TIMER:
+	.word 0xffffffa1
 
 /* 96 MHz Samsung Mobile DDR */
-SDRAM_CONFIG_VAL:
-	.word 0x001200f4
+/* Original setting for TMX device */
+VAL_SDRAM_CONFIG_SDF0:
+    .word 0x0014e6fe
 
-DLL_LRD_CONTROL_VAL:
-	.word 0x00800002
+/* NEW_SYS_FREQ mode (valid only TMP/TMS devices) */
+VAL_SDRAM_CONFIG_SDF1:
+    .word 0x0114e6fe
 
 VAL_ARM_CKCTL:
-	.word 0x3000
+	.word 0x2000		/* was:	0x3000, now use CLK_REF for timer input */
 VAL_DPLL1_CTL:
 	.word 0x2830
 
@@ -392,11 +439,15 @@ VAL_DPLL1_CTL:
 VAL_TC_EMIFS_CS0_CONFIG:
 	.word 0x002130b0
 VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x00001131
+	.word 0x00001133
 VAL_TC_EMIFS_CS2_CONFIG:
 	.word 0x000055f0
 VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x88011131
+	.word 0x88013141
+VAL_TC_EMIFS_DWS:	/* Enable EMIFS.RDY for CS1 access (ether) */
+	.word 0x000000c0
+VAL_DEVICE_ID_TMP:	/* TMP/TMS=0xb65f, TMX=0xb58c */
+	.word 0xb65f
 #endif
 
 #ifdef CONFIG_H2_OMAP1610
@@ -407,36 +458,20 @@ VAL_TC_EMIFS_CS1_CONFIG:
 VAL_TC_EMIFS_CS2_CONFIG:
 	.word 0xf800f22a
 VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x88011131
+	.word 0x88013141
 VAL_TC_EMIFS_CS1_ADVANCED:
 	.word 0x00000022
 #endif
 
-VAL_TC_EMIFF_SDRAM_CONFIG:
-	.word 0x010290fc
-VAL_TC_EMIFF_MRS:
-	.word 0x00000027
-
 VAL_ARM_IDLECT1:
 	.word 0x00000400
-
 VAL_ARM_IDLECT2:
 	.word 0x00000886
 VAL_ARM_IDLECT3:
 	.word 0x00000015
 
-WATCHDOG_VAL1:
-	.word 0x000000f5
-WATCHDOG_VAL2:
-	.word 0x000000a0
-
-VAL_MPU_LOAD_TIMER:
-	.word 0xffffffff
-VAL_MPU_CNTL_TIMER:
-	.word 0xffffffa1
-
 /* command values */
-.equ CMD_SDRAM_NOP,		0x00000000
-.equ CMD_SDRAM_PRECHARGE,	0x00000001
-.equ CMD_SDRAM_AUTOREFRESH,	0x00000002
-.equ CMD_SDRAM_CKE_SET_HIGH,	0x00000007
+.equ CMD_SDRAM_NOP,             0x00000000
+.equ CMD_SDRAM_PRECHARGE,       0x00000001
+.equ CMD_SDRAM_AUTOREFRESH,     0x00000002
+.equ CMD_SDRAM_CKE_SET_HIGH,    0x00000007