Merge branch 'master' of git://git.denx.de/u-boot-arm

6 files changed, 41 insertions, 40 deletions

diff --git a/board/omap3/beagle/beagle.c b/board/omap3/beagle/beagle.c
index 8d60651..cc8e2f9 100644
--- a/board/omap3/beagle/beagle.c
+++ b/board/omap3/beagle/beagle.c
@@ -38,10 +38,10 @@
 
 static int beagle_revision_c;
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -55,23 +55,23 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: beagle_get_revision
  * Description: Return revision of the BeagleBoard this code is running on.
  *              If it is a revision Ax/Bx board, this function returns 0,
  *              on a revision C board you will get a 1.
- *****************************************************************************/
+ */
 int beagle_get_revision(void)
 {
 	return beagle_revision_c;
 }
 
-/******************************************************************************
+/*
  * Routine: beagle_identify
  * Description: Detect if we are running on a Beagle revision Ax/Bx or
  *              Cx. This can be done by GPIO_171. If this is low, we are
  *              running on a revision C board.
- *****************************************************************************/
+ */
 void beagle_identify(void)
 {
 	gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
@@ -92,10 +92,10 @@ void beagle_identify(void)
 	}
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Configure board specific parts
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 	gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
@@ -121,12 +121,12 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	MUX_BEAGLE();
diff --git a/board/omap3/evm/evm.c b/board/omap3/evm/evm.c
index 3a27c8f..c008c2e 100644
--- a/board/omap3/evm/evm.c
+++ b/board/omap3/evm/evm.c
@@ -36,10 +36,10 @@
 #include <asm/mach-types.h>
 #include "evm.h"
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -53,10 +53,10 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Init ethernet (done here so udelay works)
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 
@@ -73,22 +73,22 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	MUX_EVM();
 }
 
-/******************************************************************************
+/*
  * Routine: setup_net_chip
  * Description: Setting up the configuration GPMC registers specific to the
  *		Ethernet hardware.
- *****************************************************************************/
+ */
 static void setup_net_chip(void)
 {
 	gpio_t *gpio3_base = (gpio_t *)OMAP34XX_GPIO3_BASE;
diff --git a/board/omap3/overo/overo.c b/board/omap3/overo/overo.c
index 37bf350..809b77b 100644
--- a/board/omap3/overo/overo.c
+++ b/board/omap3/overo/overo.c
@@ -35,10 +35,10 @@
 #include <asm/mach-types.h>
 #include "overo.h"
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -52,10 +52,10 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Configure board specific parts
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 	power_init_r();
@@ -65,12 +65,12 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	MUX_OVERO();
diff --git a/board/omap3/overo/overo.h b/board/omap3/overo/overo.h
index 71de3f1..e8ccc1d 100644
--- a/board/omap3/overo/overo.h
+++ b/board/omap3/overo/overo.h
@@ -185,6 +185,7 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0*/\
  MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0*/\
  MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | EN  | M4)) /*GPIO_114*/\
+							 /* - PEN_DOWN*/\
  MUX_VAL(CP(CSI2_DY1),		(IEN  | PTU | EN  | M4)) /*GPIO_115*/\
  /*Audio Interface */\
  MUX_VAL(CP(MCBSP2_FSX),	(IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
@@ -295,7 +296,7 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /*GPIO_186*/\
  MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
  MUX_VAL(CP(ETK_CTL_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
- MUX_VAL(CP(ETK_D0_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT4*/\
+ MUX_VAL(CP(ETK_D0_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_14*/\
  MUX_VAL(CP(ETK_D1_ES2),	(IEN  | PTD | EN  | M4)) /*GPIO_15 - X_GATE*/\
  MUX_VAL(CP(ETK_D2_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_16*/\
 							 /* - W2W_NRESET*/\
@@ -303,9 +304,9 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(ETK_D4_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT0*/\
  MUX_VAL(CP(ETK_D5_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT1*/\
  MUX_VAL(CP(ETK_D6_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT2*/\
- MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT7*/\
- MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT6*/\
- MUX_VAL(CP(ETK_D9_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT5*/\
+ MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_21*/\
+ MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_22*/\
+ MUX_VAL(CP(ETK_D9_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_23*/\
  MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
  MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
  MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DIR*/\
diff --git a/board/omap3/pandora/pandora.c b/board/omap3/pandora/pandora.c
index dfd51ec..c2f98ea 100644
--- a/board/omap3/pandora/pandora.c
+++ b/board/omap3/pandora/pandora.c
@@ -36,10 +36,10 @@
 #include <asm/mach-types.h>
 #include "pandora.h"
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -53,10 +53,10 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Configure board specific parts
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 	gpio_t *gpio1_base = (gpio_t *)OMAP34XX_GPIO1_BASE;
@@ -82,12 +82,12 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	MUX_PANDORA();
diff --git a/board/omap3/zoom1/zoom1.c b/board/omap3/zoom1/zoom1.c
index 702f732..db4d087 100644
--- a/board/omap3/zoom1/zoom1.c
+++ b/board/omap3/zoom1/zoom1.c
@@ -37,10 +37,10 @@
 #include <asm/mach-types.h>
 #include "zoom1.h"
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -54,10 +54,10 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Configure zoom board specific configurations
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 	power_init_r();
@@ -65,12 +65,12 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	/* platform specific muxes */