arm: move Logicpd's boards to board/logicpd/

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 0 insertions, 182 deletions

diff --git a/board/omap3/zoom2/zoom2.c b/board/omap3/zoom2/zoom2.c
deleted file mode 100644
index d9e2ae5..0000000
--- a/board/omap3/zoom2/zoom2.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * Derived from Zoom1 code by
- *	Nishanth Menon <nm@ti.com>
- *	Sunil Kumar <sunilsaini05@gmail.com>
- *	Shashi Ranjan <shashiranjanmca05@gmail.com>
- *	Richard Woodruff <r-woodruff2@ti.com>
- *	Syed Mohammed Khasim <khasim@ti.com>
- *
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include "zoom2.h"
-#include "zoom2_serial.h"
-
-/*
- * This the the zoom2, board specific, gpmc configuration for the
- * quad uart on the debug board.   The more general gpmc configurations
- * are setup at the cpu level in cpu/arm_cortexa8/omap3/mem.c
- *
- * The details of the setting of the serial gpmc setup are not available.
- * The values were provided by another party.
- */
-void enable_gpmc_cs_config(u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
-			u32 size);
-
-static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = {
-	0x00011000,
-	0x001F1F01,
-	0x00080803,
-	0x1D091D09,
-	0x041D1F1F,
-	0x1D0904C4, 0
-};
-
-/* Used to track the revision of the board */
-static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN;
-
-/*
- * Routine: zoom2_get_revision
- * Description: Return the revision of the Zoom2 this code is running on.
- */
-zoom2_revision zoom2_get_revision(void)
-{
-	return revision;
-}
-
-/*
- * Routine: zoom2_identify
- * Description: Detect which version of Zoom2 we are running on.
- */
-void zoom2_identify(void)
-{
-	/*
-	 * To check for production board vs beta board,
-	 * check if gpio 94 is clear.
-	 *
-	 * No way yet to check for alpha board identity.
-	 * Alpha boards were produced in very limited quantities
-	 * and they are not commonly used.  They are mentioned here
-	 * only for completeness.
-	 */
-	if (!omap_request_gpio(94)) {
-		unsigned int val;
-
-		omap_set_gpio_direction(94, 1);
-		val = omap_get_gpio_datain(94);
-		omap_free_gpio(94);
-
-		if (val)
-			revision = ZOOM2_REVISION_BETA;
-		else
-			revision = ZOOM2_REVISION_PRODUCTION;
-	}
-
-	printf("Board revision ");
-	switch (revision) {
-	case ZOOM2_REVISION_PRODUCTION:
-		printf("Production\n");
-		break;
-	case ZOOM2_REVISION_BETA:
-		printf("Beta\n");
-		break;
-	default:
-		printf("Unknown\n");
-		break;
-	}
-}
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init (void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-	u32 *gpmc_config;
-
-	gpmc_init ();		/* in SRAM or SDRAM, finish GPMC */
-
-	/* Configure console support on zoom2 */
-	gpmc_config = gpmc_serial_TL16CP754C;
-	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[4],
-			SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M);
-
-	/* board id for Linux */
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP_ZOOM2;
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-	status_led_set (STATUS_LED_BOOT, STATUS_LED_ON);
-#endif
-	return 0;
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure zoom board specific configurations
- */
-int misc_init_r(void)
-{
-	zoom2_identify();
-	twl4030_power_init();
-	twl4030_led_init();
-	dieid_num_r();
-
-	/*
-	 * Board Reset
-	 * The board is reset by holding the the large button
-	 * on the top right side of the main board for
-	 * eight seconds.
-	 *
-	 * There are reported problems of some beta boards
-	 * continously resetting.  For those boards, disable resetting.
-	 */
-	if (ZOOM2_REVISION_PRODUCTION <= zoom2_get_revision())
-		twl4030_power_reset_init();
-
-	return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs (void)
-{
-	/* platform specific muxes */
-	MUX_ZOOM2 ();
-}