omap: move TI's boards to board/ti/

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 0 insertions, 396 deletions

diff --git a/board/omap1510inn/lowlevel_init.S b/board/omap1510inn/lowlevel_init.S
deleted file mode 100644
index 1c68e5b..0000000
--- a/board/omap1510inn/lowlevel_init.S
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- *
- * -- Some bits of code used from rrload's head_OMAP1510.s --
- * Copyright (C) 2002 RidgeRun, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP1510)
-#include <./configs/omap1510.h>
-#endif
-
-#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
-
-
-_TEXT_BASE:
-	.word	TEXT_BASE        /* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/*
-	 * Configure 1510 pins functions to match our board.
-	 */
-	ldr     r0, REG_PULL_DWN_CTRL_0
-	ldr     r1, VAL_PULL_DWN_CTRL_0
-	str     r1, [r0]
-	ldr     r0, REG_PULL_DWN_CTRL_1
-	ldr     r1, VAL_PULL_DWN_CTRL_1
-	str     r1, [r0]
-	ldr     r0, REG_PULL_DWN_CTRL_2
-	ldr     r1, VAL_PULL_DWN_CTRL_2
-	str     r1, [r0]
-	ldr     r0, REG_PULL_DWN_CTRL_3
-	ldr     r1, VAL_PULL_DWN_CTRL_3
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_4
-	ldr     r1, VAL_FUNC_MUX_CTRL_4
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_5
-	ldr     r1, VAL_FUNC_MUX_CTRL_5
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_6
-	ldr     r1, VAL_FUNC_MUX_CTRL_6
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_7
-	ldr     r1, VAL_FUNC_MUX_CTRL_7
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_8
-	ldr     r1, VAL_FUNC_MUX_CTRL_8
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_9
-	ldr     r1, VAL_FUNC_MUX_CTRL_9
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_A
-	ldr     r1, VAL_FUNC_MUX_CTRL_A
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_B
-	ldr     r1, VAL_FUNC_MUX_CTRL_B
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_C
-	ldr     r1, VAL_FUNC_MUX_CTRL_C
-	str     r1, [r0]
-	ldr     r0, REG_FUNC_MUX_CTRL_D
-	ldr     r1, VAL_FUNC_MUX_CTRL_D
-	str     r1, [r0]
-	ldr     r0, REG_VOLTAGE_CTRL_0
-	ldr     r1, VAL_VOLTAGE_CTRL_0
-	str     r1, [r0]
-	ldr     r0, REG_TEST_DBG_CTRL_0
-	ldr     r1, VAL_TEST_DBG_CTRL_0
-	str     r1, [r0]
-	ldr     r0, REG_MOD_CONF_CTRL_0
-	ldr     r1, VAL_MOD_CONF_CTRL_0
-	str     r1, [r0]
-
-	/* Move to 1510 mode */
-	ldr     r0, REG_COMP_MODE_CTRL_0
-	ldr     r1, VAL_COMP_MODE_CTRL_0
-	str     r1, [r0]
-
-	/* Set up Traffic Ctlr*/
-	ldr r0, REG_TC_IMIF_PRIO
-	mov r1, #0x0
-	str r1, [r0]
-	ldr r0, REG_TC_EMIFS_PRIO
-	str r1, [r0]
-	ldr r0, REG_TC_EMIFF_PRIO
-	str r1, [r0]
-
-	ldr r0, REG_TC_EMIFS_CONFIG
-	ldr r1, [r0]
-	bic r1, r1, #0x08   /* clear the global power-down enable PDE bit */
-	bic r1, r1, #0x01   /* write protect flash by clearing the WP bit */
-	str r1, [r0]        /* EMIFS GlB Configuration. (value 0x12 most likely) */
-
-	/* Setup some clock domains */
-	ldr r1, =OMAP1510_CLKS
-	ldr r0, REG_ARM_IDLECT2
-	strh r1, [r0]  /* CLKM, Clock domain control. */
-
-	mov r1, #0x01  /* PER_EN bit */
-	ldr r0, REG_ARM_RSTCT2
-	strh r1, [r0]  /* CLKM; Peripheral reset. */
-
-	/* Set CLKM to Sync-Scalable  */
-	/* I supposidly need to enable the dsp clock before switching */
-	mov r1, #0x1000
-	ldr r0, REG_ARM_SYSST
-	strh r1, [r0]
-	mov r0, #0x400
-1:
-	subs r0, r0, #0x1   /* wait for any bubbles to finish */
-	bne 1b
-
-	ldr r1, VAL_ARM_CKCTL  /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
-	ldr r0, REG_ARM_CKCTL
-	strh r1, [r0]
-
-	/* setup DPLL 1 */
-	ldr r1, VAL_DPLL1_CTL
-	ldr r0, REG_DPLL1_CTL
-	strh r1, [r0]
-	ands r1, r1, #0x10  /* Check if PLL is enabled. */
-	beq lock_end        /* Do not look for lock if BYPASS selected */
-2:
-	ldrh r1, [r0]
-	ands r1, r1, #0x01  /* Check the LOCK bit. */
-	beq 2b              /* ...loop until bit goes hi. */
-lock_end:
-
-	/* Set memory timings corresponding to the new clock speed */
-
-	/* Check execution location to determine current execution location
-	 * and branch to appropriate initialization code.
-	 */
-	mov r0, #0x10000000                 /* Load physical SDRAM base. */
-	mov r1, pc                          /* Get current execution location. */
-	/* Zero all but top 6 bits of PC, as they alone detect whether an
-	 * address is in the range 0x1000:0000-0x13ff:ffff, the 64M sized
-	 * valid range for SDRAM on the OMAP 1510/5910.
-	 */
-	and r1, r1, #0xfc000000
-	cmp r1, r0			/* Compare. */
-	beq skip_sdram			/* Skip over EMIF-fast initialization
-					 * if running from SDRAM.
-					 */
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov r3, #0x1800                        /* value should be checked */
-3:
-	subs r3, r3, #0x1                     /* Decrement count */
-	bne 3b
-
-	/*
-	 * Set SDRAM control values. Disable refresh before MRS command.
-	 */
-	ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG   /* get good value */
-	bic r3, r0, #0xC                    /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
-	orr r3, r3, #0x8000000              /* (BIT27) Disable CLK when Power down or Self-Refresh */
-	orr r3, r3, #0x4000000              /* BIT26 Power Down Enable */
-	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
-	str r3, [r2]                        /* Store the passed value with AR disabled. */
-
-	ldr r1, VAL_TC_EMIFF_MRS            /* get MRS value */
-	ldr r2, REG_TC_EMIFF_MRS            /* Point to MRS register. */
-	str r1, [r2]                        /* Store the passed value.*/
-
-	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
-	str r0, [r2]                        /* Store the passed value. */
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov r3, #0x1800
-4:
-	subs r3, r3, #1                     /* Decrement count. */
-	bne 4b
-
-skip_sdram:
-
-	/* slow interface */
-	ldr r1, VAL_TC_EMIFS_CS0_CONFIG
-	ldr r0, REG_TC_EMIFS_CS0_CONFIG
-	str r1, [r0] /* Chip Select 0 */
-	ldr r1, VAL_TC_EMIFS_CS1_CONFIG
-	ldr r0, REG_TC_EMIFS_CS1_CONFIG
-	str r1, [r0] /* Chip Select 1 */
-	ldr r1, VAL_TC_EMIFS_CS2_CONFIG
-	ldr r0, REG_TC_EMIFS_CS2_CONFIG
-	str r1, [r0] /* Chip Select 2 */
-	ldr r1, VAL_TC_EMIFS_CS3_CONFIG
-	ldr r0, REG_TC_EMIFS_CS3_CONFIG
-	str r1, [r0] /* Chip Select 3 */
-
- /* Next, Enable the RS232 Line Drivers in the FPGA. */
- /* Also, power on the audio CODEC's amplifier here, */
- /* which will make a noise on the audio output. */
- /* This is done here instead of in the kernel so there */
- /* isn't a loud popping noise at the start of each */
- /* song. */
- /* Also, disable the CODEC's clocks. */
- /* omap1510-HelenP1 [specific] */
-
-	ldr r0, REG_FPGA_POWER
-	mov r1, #0
-	ldr r2, REG_FPGA_DIP_SWITCH
-	ldrb r3, [r2]
-	cmp r3, #0x8
-	movne r1, #0x62     /* Enable the RS232 Line Drivers in the EPLD */
-	strb r1, [r0]
-	ldr r0, REG_FPGA_AUDIO
-	mov r1, #0x0     /* Disable sound driver (CODEC clocks) */
-	strb r1, [r0]
-
-	/* back to arch calling code */
-	mov	pc, lr
-
-/* the literal pools origin */
-	.ltorg
-
-/* OMAP configuration registers */
-REG_FUNC_MUX_CTRL_0:		/* 32 bits */
-	.word 0xfffe1000
-REG_FUNC_MUX_CTRL_1:		/* 32 bits */
-	.word 0xfffe1004
-REG_FUNC_MUX_CTRL_2:		/* 32 bits */
-	.word 0xfffe1008
-REG_COMP_MODE_CTRL_0:		/* 32 bits */
-	.word 0xfffe100c
-REG_FUNC_MUX_CTRL_3:		/* 32 bits */
-	.word 0xfffe1010
-REG_FUNC_MUX_CTRL_4:		/* 32 bits */
-	.word 0xfffe1014
-REG_FUNC_MUX_CTRL_5:		/* 32 bits */
-	.word 0xfffe1018
-REG_FUNC_MUX_CTRL_6:		/* 32 bits */
-	.word 0xfffe101c
-REG_FUNC_MUX_CTRL_7:		/* 32 bits */
-	.word 0xfffe1020
-REG_FUNC_MUX_CTRL_8:		/* 32 bits */
-	.word 0xfffe1024
-REG_FUNC_MUX_CTRL_9:		/* 32 bits */
-	.word 0xfffe1028
-REG_FUNC_MUX_CTRL_A:		/* 32 bits */
-	.word 0xfffe102C
-REG_FUNC_MUX_CTRL_B:		/* 32 bits */
-	.word 0xfffe1030
-REG_FUNC_MUX_CTRL_C:		/* 32 bits */
-	.word 0xfffe1034
-REG_FUNC_MUX_CTRL_D:		/* 32 bits */
-	.word 0xfffe1038
-REG_PULL_DWN_CTRL_0:		/* 32 bits */
-	.word 0xfffe1040
-REG_PULL_DWN_CTRL_1:		/* 32 bits */
-	.word 0xfffe1044
-REG_PULL_DWN_CTRL_2:		/* 32 bits */
-	.word 0xfffe1048
-REG_PULL_DWN_CTRL_3:		/* 32 bits */
-	.word 0xfffe104c
-REG_VOLTAGE_CTRL_0:		/* 32 bits */
-	.word 0xfffe1060
-REG_TEST_DBG_CTRL_0:		/* 32 bits */
-	.word 0xfffe1070
-REG_MOD_CONF_CTRL_0:		/* 32 bits */
-	.word 0xfffe1080
-REG_TC_IMIF_PRIO:		/* 32 bits */
-	.word 0xfffecc00
-REG_TC_EMIFS_PRIO:		/* 32 bits */
-	.word 0xfffecc04
-REG_TC_EMIFF_PRIO:		/* 32 bits */
-	.word 0xfffecc08
-REG_TC_EMIFS_CONFIG:		/* 32 bits */
-	.word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
-	.word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
-	.word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
-	.word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
-	.word 0xfffecc1c
-REG_TC_EMIFF_SDRAM_CONFIG:	/* 32 bits */
-	.word 0xfffecc20
-REG_TC_EMIFF_MRS:		/* 32 bits */
-	.word 0xfffecc24
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL:			/* 16 bits */
-	.word 0xfffece00
-REG_ARM_IDLECT2:		/* 16 bits */
-	.word 0xfffece08
-REG_ARM_RSTCT2:			/* 16 bits */
-	.word 0xfffece14
-REG_ARM_SYSST:			/* 16 bits */
-	.word 0xfffece18
-/* DPLL control registers */
-REG_DPLL1_CTL:			/* 16 bits */
-	.word 0xfffecf00
-/* identification code register */
-REG_IDCODE:			/* 32 bits */
-	.word 0xfffed404
-
-/* Innovator specific */
-REG_FPGA_LED_DIGIT:		/* 8 bits (not used on Innovator) */
-	.word 0x08000003
-REG_FPGA_POWER:			/* 8 bits */
-	.word 0x08000005
-REG_FPGA_AUDIO:			/* 8 bits (not used on Innovator) */
-	.word 0x0800000c
-REG_FPGA_DIP_SWITCH:		/* 8 bits (not used on Innovator) */
-	.word 0x0800000e
-
-VAL_COMP_MODE_CTRL_0:
-	.word 0x0000eaef
-VAL_FUNC_MUX_CTRL_4:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_5:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_6:
-	.word 0x00000001
-VAL_FUNC_MUX_CTRL_7:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_8:
-	.word 0x10001200
-VAL_FUNC_MUX_CTRL_9:
-	.word 0x01201012
-VAL_FUNC_MUX_CTRL_A:
-	.word 0x00000248
-VAL_FUNC_MUX_CTRL_B:
-	.word 0x00000248
-VAL_FUNC_MUX_CTRL_C:
-	.word 0x09000000
-VAL_FUNC_MUX_CTRL_D:
-	.word 0x00000000
-VAL_PULL_DWN_CTRL_0:
-	.word 0x11a10000
-VAL_PULL_DWN_CTRL_1:
-	.word 0x2e047fff
-VAL_PULL_DWN_CTRL_2:
-	.word 0xffd603a6
-VAL_PULL_DWN_CTRL_3:
-	.word 0x00003e03
-VAL_VOLTAGE_CTRL_0:
-	.word 0x00000007
-VAL_TEST_DBG_CTRL_0:
-	/*  See Errata 4.13, This works around a SRAM bug, for chips below ES2.5 .
-	 *   This slows down internal SRAM accesses.
-	 */
-	.word 0x00000007
-VAL_MOD_CONF_CTRL_0:
-	.word 0x0b000008
-VAL_ARM_CKCTL:
-	.word 0x010f
-VAL_DPLL1_CTL:
-	.word 0x2710
-VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
-	.word 0x00001149
-VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
-	.word 0x00004158
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x002130b0
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x0000f559
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0x000055f0
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x00003331
-VAL_TC_EMIFF_SDRAM_CONFIG:
-	.word 0x010290fc
-VAL_TC_EMIFF_MRS:
-	.word 0x00000027